- Thread starter
- #21
Time for an update. Have all but finished work on the chassis and it will be ready for the body to go back on once the under floor and firewall are painted. Photo dump of some before and after.
All new EFS suspension with a 2 inch lift. All new brakes including slotted rotors, new rear drums, rear wheel cylinders, all pads and shoes replaced, ungraded LN106 Hilux calipers, all flexible lines replaced. Will also be adding an 80 series booster. Should give a nice improvement to the braking.
New wheel bearing and rebuilt hubs. New clutch and pressure plate installed. Redid all the gaskets on the motor along with the front crank seal, rear main seal and front gearbox shaft input seal. Fingers crossed there should be no oil leaks.
All new EFS suspension with a 2 inch lift. All new brakes including slotted rotors, new rear drums, rear wheel cylinders, all pads and shoes replaced, ungraded LN106 Hilux calipers, all flexible lines replaced. Will also be adding an 80 series booster. Should give a nice improvement to the braking.
New wheel bearing and rebuilt hubs. New clutch and pressure plate installed. Redid all the gaskets on the motor along with the front crank seal, rear main seal and front gearbox shaft input seal. Fingers crossed there should be no oil leaks.
. Keep updating your thread with Pics and lessons! Everyone will be doing this soon and many more will be kept on the rode.
