Builds 1997 FZJ80 to HDJ80 1HD-FTE + H152F (5 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Nice title upgrade. This IS the ultimate 80 build!

Now that you’ve gone electric like Dylan in ‘65, I’m keeping all the rest of my 1HDFT stickers!
 
I thought you said otherwise but this works too.

Doesn’t really matter since your 442 is fully hydraulic. As long as we can mate it to the FTE, all is good.

Cheers
 
Nice title upgrade. This IS the ultimate 80 build!

Now that you’ve gone electric like Dylan in ‘65, I’m keeping all the rest of my 1HDFT stickers!

Hey I could use one for the 67 p/u and John still needs one for the FT going in the 77. 😁

Cheers
 
@SNLC- don’t worry, I made a LOT.

Unfortunately this run wasn’t printed on foil. I’m going to do some in-depth product testing (stick a whole bunch all over my engine bay) and make sure they hold up to engine temps.

We are seeing if we can reprint another run that are foil backed.

Either way I will have plenty for you, and others.
 
All good. The gentleman handling the harness (Thrashlux) just confirmed the 79 series harness he found for me will work out nicely. @SNLC is now going to send the FZJ harness and ECU down to Aus for Thrashlux to mate them up. Looking forward to some new FTE engine bling next week.
 
This is just gorgeous.

C455F85D-9966-4611-9B07-1639E7B3DC7D.webp
B1ED3451-B63E-4DA5-A6B5-CF70E3FC10F3.webp
CDDF72DB-9406-4AAA-AA14-CB2BC790DC2F.webp
FD8E947C-656E-4244-BD82-7C8417F7177B.webp


Obvious now Toyota test ran this when it was assembled.

Cheers
 
That is a super cool sight to see.

Big day of progress. The injectors got pulled and shipped off to Gturbo in Australia. The harness and ECU were shipped off to Thrashlux in Australia. We decided to ditch the automatic for a manual. Should make for a good week of OEM Toyota porn as new parts show up.
 
John will there be an H152 in your future? Hope so!
 

Users who are viewing this thread

Back
Top Bottom