Other Vehicles

Classifieds: Jeep, Land Rover, Chevrolet, Ford, Dodge, Nissan, etc

Filter by prefix:

For Sale: 1996 80 series LOCKERS $5000
For Sale: 1996 80 series LOCKERS $4000 For Sale: 1996 80 series LOCKERS $4000 Hey guys I have decided to sell my cruiser, I only use it for offroading now but i do drive it to all the local parks at 70mph with zero issues. GOOD OME 2.5 lift 315/75/16 mud terrains 40% tread rotors/pads less than 15k ago runs perfect lockers work perfect upgraded exhaust BAD body is really rough and not repairable, too many cliffs trips but all doors open and close and no broken glass but front has a small crack now. drivers side birf just started clicking when you turn but wheeled all day last weekend at the cliffs with no issues, I did a complete knuckle rebuild last year with all new bearings and the shop did'nt do the best...
This truck was overheated in 3/2009 and does not run. It has a H55 trans, OME suspension, 40 gal gas tank, custom mounted bucket seats from a '97 BMW, ConnFerr roof rack, Kaymar rear bumper w/ tire and gas can carriers. Truck has 188,000 miles, trans was new and xfer was rebuilt in 2001 at 146,000 miles. Lots of new smog stuff added and new factory carb in 5/2007 at 181,800 mi. Truck is located near Pasadena, CA. Registration has expired and requires smog to be renewed. Reg was paid for 2010 but not issued because of smog. Reg was not reissued in 2011. This truck needs to be out of my driveway ASAP. First $1500 cash takes it. Call Ron at 818-952-9554 or C: 818-371-1110.
1997 Toyota 4runner
1997 4runner limited 4x4 178,xxx miles. Body in decent shape has dings and scratchs no rust on body ,no frame rot. A/C & heat work. front seat on driver side is destroyed leather ripped passenger cracked , rear is fine, carpet is filthy :mad: ! Wife's truck she got a new car : Truck needs brakes,muffler,tires and new front seat or cover. Electric seat switch knobs missings as well as cover . would make a good truck after baseline work done . $2900.00 in Abington Pa marv 267-280-2620 call after 4:pm text anytime
I have a 2007 Nissan 350Z in San Marino Blue for sale in the Clemson area. I'm the original owner and it only has 40k miles on the clock. It has minor upgrades; Greddy EVO-TT Exhaust, polished cold air intake tubes (yes it has 2), BFG KDW's with plenty of rubber, and a ton of custom minor upgrades. I hate to see it go, but I never drive it and a move to MD is most likely in my future. So its up for sale I'm asking 19k OBO. My Cell is 864-630-7233 and I can email pic's (@ work now and don't have any with me) Send me a PM if your want to look or know someone who might want her
Fof Sale or Trade:  96 Mildly Built 80 in SC
My have talked the wife into getting another 60, so putting my 80 out there for sale or trade for a 60 that could take me across the country. I really need a reliable 60 so let me know what you have; mods are a plus. Mud Price is $8200 Located in Charleston, SC 80 Details: 96 Factory locked 80 OME850J/863 IPOR rear bumper with swing out HD steering linkages Custom front bumper with Warn M8000 Custom rear storage system CDL/Pin7 Touch Screen Stereo PHH done No Oil Leaks Birfs done 3i5 Toyo At's with a little life left
1994 80 series, 3 factory lockers
Unfortunately, I need to sell my 1994 80 series. It is truely in excellent condition, runs and drives great. I have been driving it up and down the front range with absolutely no problems. It has 270k miles, but runs and drives like a lot less. Lockers all work, a/c works, nice pioneer nav/bluetooth stereo. 2 sets of rims and tires, one almost new set ofstudded goodyear duratracs, 285/75R16, one set junky tires for going to e-test. This truck is mostly stock. The front seat leather is worn and separating, but I will give you my sheepskin seatcovers if you want them. ABS light is on, it needs a sensor that I haven't gotten around to replacing. It has new HID headlamps and a new radiator. All the fluids are recently...
97 locked 80
it's criminal what i have done to this truck. but my fellow mudders get it, thats why this is the only place i am listing it. this is a 40th anniversary, it still has the badges on the side, although i sprayed Raptor liner right over them. still has the badge on the shift console too, if that matters to anyone. when i bought this rig, it was impeccable. but i bought it to wheel, and thats exactly what i did. its got OME heavies up front, meds in back, ARB bumper, warn 9.5xp, homebrew sliders and rear bumper, 2" body lift with all the shifter and steering mods to make it work well, AR Mojave teflon coated wheels that have been raped by rocks, 35x9.50 boggers in pretty good shape, Raptor liner up to the door handles. mechanical fan has...
1985 1 Ton Toy Truggy
I think I'm ready to sell my Toy, not interested in trades, I'd like the cash to pay some bills Its a 1985 Toyota Pickup, regular cab. I've built this thing from bone stock over the last 5 years, and it flat works. I've been on the all the hardest trails the Hammers, Moab, Montrose, have to offer. I can honestly say "I'm the guy that never breaks." It amazes me every time out, just how well it does. It has 22re stock G52 5-speed Dana 60 front, ARB, 5.86 gears all 35 spline spicer, CTM flanges Dana 61 rear, Welded, 5.86 gears, Moser 35 spline FF Dual Marlin Crawler t-cases, 2.28 front, and 4.7 rear 42" Irocs, 80% tread on 17" MRW beadlock wheels Warn 9.5 XP winch, synthetic line (needs replacing) 3 Link front with a...
WagonGear needs a new 60 body, West Coast
Ladies and gents, wheelers and dealers of the For Sale section, I am in serious need of a replacement body, there are lots of things available. but to be honest I don't have the time to religiously keep an eye on craigslist and the For Sale section here is way out of grasp. :p SO, if anyone has a line on some clean 60 series sheet metal pretty much anywhere on the west coast, let me know. All I need is the sheet metal, but I need ALL of it, and the only requirement is that it be rust-free. It can have dents and bruises, not looking for beauty here, but I need it to be solid. I've got a great chassis with good mechanicals, and a lovely diesel but my body is officially gone. I'll post some pictures so that maybe you can take pity on...
87 Toyota Hilux
Need to sell moving to Australia so I am asking 3500.00 to Mud viewers only come at me with a respectable price and we can talk further. It has rebuilt tranny and transfer automatic as well as lots of other new. I have all receipts and warrantys. It is not registered but non op has been paid. It will pas smog as all the smog stuff has been replaced including the cat. I need it gone soon so lets get it figured out one less thing I have to deal with right now thanks. I am at dreadlockm3@hotmail.com to get a hold of me there is a POS out there posting fake ads under my email on craigslist because I wouldn't except hi retarded offer so if u see a red one there its not mine lol.
Making room for (and trying to defray the cost of restoring) the new FJ-60, so I'm selling my 4Runner. Here is the cut and pasted text from my craigslist ad. There are some typical craigslist photos on the ad, and I would be glad to email high resolution detail pics of what ever you would like to see better, link here. 4WD, manual transmission, 2.7 liter 4 cylinder, 202k original miles. The good: Everything works and the vehicle runs. Interior is OK but not great. Addicted Off-road front bumper with winch mount (no winch). Smitty-Bilt nerf bars. 265/70R16 Nitto Terra-Grapplers (Toyo's off-road line) have less than 5,000 miles on them. AC blows cold/ heater blows hot, all wipers and defrosters are in good shape...
Gang, Just wrecked my 80 and the ARB saved most of the truck. The only thing we can see wrong mechanically so far is the off road light harness is cut and the rubber tranny cooler line hose was cut that runs behind the DS headlight. The rest is hood, fenders and bumper need replacing. Looking to make a quick sale on my 4Runner to fund the repair. FS D/FW: 1994 4Runner SR5 auto 4WD *NEEDS HG REPLACED* everything else 90%, North Dallas, TX. Was my DD for 7 years, lots of aftermarket parts, no rust, completely rebuilt tranny and t-case swap (2 yrs ago) ARB front bumper, Aluminum core radiator (8-10 mos.old), new top and bottom hoses, OME med Lift (shocks and springs), OME torsion bars, Downey ceramic coated headers, Magnaflow...

Thread Filter

Google Preferred
Back
Top Bottom