FJ55 | FJ56

Classifieds : Toyota 55-series / 56-series Land Cruiser

Filter by prefix:

Sold
1972 Fj55 that I bought to cut up, but have gone another direction. It is missing rear seat and front seats are buckets from another vehicle. It was recently yard driving before small block was removed. Drivetrain is intact from Chevy bell housing on original 3 speed, tcase, drivelines and axles. $600 no title Thanks
1971 FJ55
$4,250 This pig has come a long way, but it still has a ways to go. When I bought the truck sight unseen I was told it just needed a new clutch. This turned out to be far from the truth, and I quickly reached, and exceeded my project budget. I am asking $4,250 for the truck and all the spare parts. Details: Truck is a 1971 with a 78 engine and transmission. It also has a front axle with disc from a 79. Rebuilt both front and rear axles, new rotors, shoes, pads, cylinders, etc. All steering ends have been replaced the steering relay rod with one with serviceable ends. The carb was rebuilt by Jim C, it has a new fuel pump, clutch slave cylinder, rebuilt ebrake with new cable. Known issues. Its rusty, It needs a new brake master...
Im looking for a solid stock(ish) FJ55. Want a daily driver no crawler no big lift have a short fiancé. Solid motor, rebuilts welcome. Prefer F Motor but no deal breaker. Not looking for a rust bucket. Have trailer will travel. Help out a pig lover! Fill up thread with leads or PM me. Thanks!
1971 FJ55 Austin TX $12K
NOT MINE 1971 Toyota Land Cruiser FJ55 For Sale 1971 Toyota Land Cruiser FJ55 For Sale - $12000 (Austin) "Toyota Land Cruiser for sale, this early of the Japanese SUV being offered for sale in Austin, is original examples of the FJ55 Land Cruiser built in 1971 is said runs and drives greats, never get touch restoration or modified. That could be a perfect start to light restoration, very fun to see him on the refreshing look, like a new paint and new chrome. I really want to make sure this goes to a good home. The truck is fully operational and very fun to drive. 3 on the tree with 2f motor. Has power steering, disc brakes and lots of recent work. This truck has been built to be driven. It's mechanically solid and gets thumbs...
1979 FJ55 factory power steering Idaho
I have a really nice fj55 that I’m putting up for sale. It has been my wife’s daily driver and she has loved it. We decided to get a 100 series for our family rig as towing a trailer has become more frequent. This was bought new by a local doctor in couer d’alene Idaho then sold to a pilot who had it stored in his hangar with plans to restore which he never got around to. We bought it from him. He drove it occasionally to keep everything in working order. We haven’t had to do anything to it since buying it. Runs and drives amazing. All factory emissions stuff still intact. Factory power steering. Cruise control was added which didn’t seem to work but I haven’t looked into it. Long distance travel tank installed but same story on it...
1975 FJ55 Body
UPDATE 7/11/18 - This body has been sold. Thank you. I purchased this FJ55 a few years ago with the intention of restoring it. After having it sandblasted and epoxy primered I found some crash repair on the drivers side rear C pillar. It's nothing terrible, but it stalled the effort. Doors, hood, roof, front clip, tailgate are all good. Front fenders have typical rust at bottom but can be saved. Also have it's frame, which is straight and has not been blasted/coated. It has had an (early) FJ60 transmission crossmember welded in for use with a H55f transmission. Since I have another FJ55 I am going to let this one go and focus on the other. Not really sure what the package is worth but I am open to reasonable offers. I will not...
1974 FJ55
Hi guys, I've got a '74 FJ55 (Iron Pig) that I have to sell and not sure what it's worth and realistic to ask. Here's a breakdown of what has been done, along with a few pics. Appreciate any feedback you can provide. Thanks. It starts and runs well, however it is over 40 years old and has not been restored. It has a strong 2F engine out of a '77 Cruiser with headers and a Weber carburetor. The the transmission is the stock 4 speed manual with a 3 speed transfer case (2 high, 4 high, and 4 low). The front axle has been converted from an FJ60 which has disc brakes, birfield hub and axles. The power steering was converted from a Toyota mini truck which was done by Iron Pig Off Road. IPOR also did the massive Trail Blazer front bumper...
Not Mine* Project Pig (1972) in Loganville, GA $3,000
1972 FJ55 toyota land cruiser cadilac 500 motor(8.3L), freshly rebuilt turbo 400 transmission, 1973 transfer fj45 transfer case 4w disc brakes, 411 gears with lock rights. Ive got a new gas tank and radiator not installed but the truck will keep getting further along with time as its a project. motor starts, fresh turbo 400 is paired up, set of 35" (I think they're BF GW) This truck does not run so you will need a trailer I don't have time to finish it due to school but if you're looking for a unique project then this is for you. I'm sorry if you contacted me earlier about this truck but I wasn't able to get pictures until now. Open to trades anything really or cash is always welcome. Make me an offer.
1972 FJ55 Central Oregon
Not mine, but I can get you in touch with the owner. I have personally looked at this thing 1 time and it has alot of potential. Missing engine, trans, Tcase. He bought it as a project, just got a new job and is moving with to much going on. I do have a 1.5F engine that I personally know runs and has about 120# in all cylinders. I would throw in at no additional charge to help James sell this. Asking 4K OBO, if you are interested, please don't be shy to offer. He wants this thing gone. Feel free to reply, pm, call or text me, 9702619757 Justin
Wanting to trade a Diamond Axle SAS Tacoma Crawler for a Fj55 Project San Diego
Looking at trading my 1997 Solid Axle Single Cab Tacoma for an FJ55 Crawler or a project that I can build into a crawler, Pre 74, not worried about running, mostly interested in Frame, Body and interior Info below Can travel with Flatbed Can add cash on my end, or Truck plus cash on yours Value estimated around $12K 1997 Tacoma 2.4L 64" Diamond Front RCV shafts/Birfs Front Range Keyed Knuckles/Arms Dual Cases Marlin Chromoly 4.7 in rear PSC Hydo Assist, PSC pump not installed yet 1.75 .120 DOM Exo Cage, and Bumpers Removable bed rack, Swing out Spare Carrier (5) 38.5" TSLs, One Trip, 1/2 Mile on Spare Bobbed Bed ARP HUB/Knuckle Studs Super Winch Tigershark 8k Winch PRP Seat, All4offroad Rock Lights PM for more info Thank you

Thread Filter

Latest posts

Back
Top Bottom