BullElk
SILVER Star
All of the three button fobs have GXOR on them, correct ??
YotaMD Titanium Integrated Remote Key Fob Shell (1 Viewer)
- Thread starter suprarx7nut
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #1,062
Orange, yes! I updated inventory and those are available. Blue, no. It was an unpopular color and difficult to apply properly for some reason. I will be releasing a new special color (I'm planning to start doing a rotational limited color every so often now).
Would you ever expand to a flip key case like this?
Upgraded Flip Remote Key Shell Case Fob for Toyota Land Cruiser FJ Cruiser TOY43 | eBay
Take the internal components from your original key remote board and replace them to our key shell, then you are ready! It's just a key SHELL. Fully tested complete remotes with a battery installed.ebay.to
No, I don't think so. I'm not a fan of the flip keys. I'd entertain making a really nice one, but I'd expect that to carry a pretty huge price tag ($250-300 each with no electronics is my guess).
No, only the listings specifically marked GXOR have the GXOR engraving. Everything that's not marked with GXOR in the listing is a plain back unless otherwise called out.
- Thread starter
- #1,063
FYI, Two button cases are back in stock!
Buy Titanium Reinforced 2-Button Key Fob Kit for Toyota & Lexus
Enhance your Toyota and Lexus key fob with our titanium-reinforced 2-button kit. Upgrade security and style with YotaMD's premium accessories. Shop now!
www.yotamd.com
Ordered!FYI, Two button cases are back in stock!
Buy Titanium Reinforced 2-Button Key Fob Kit for Toyota & Lexus
Enhance your Toyota and Lexus key fob with our titanium-reinforced 2-button kit. Upgrade security and style with YotaMD's premium accessories. Shop now!
Ordered!! Thanks a lotFYI, Two button cases are back in stock!
Buy Titanium Reinforced 2-Button Key Fob Kit for Toyota & Lexus
Enhance your Toyota and Lexus key fob with our titanium-reinforced 2-button kit. Upgrade security and style with YotaMD's premium accessories. Shop now!
Hoping for a silver or grey 3 button to be available soon. Any eta? (Have it sitting on a birthday list)
- Thread starter
- #1,067
2 weeks!
From old and busted to new hotness 
Edit: I posted this on a Norwegian cruiser fb site, and I see you are out of stock again on the 2 button ones, they are asking where to Get them, so I shared the link to your site
Edit: I posted this on a Norwegian cruiser fb site, and I see you are out of stock again on the 2 button ones, they are asking where to Get them, so I shared the link to your site
Last edited:
BullElk
SILVER Star
Hi, I’m Richie and I have a problem.
Last edited:
@suprarx7nut Is there any logical reason my lock button would work less consistently while using your shell? I have tested it by taking it out, and sans the shell it works pretty much every time, but in the shell its inconsistent. Would it be possible the shell is making it harder for the button to be depressed all the way? That or something being misaligned is my only guess. Its not the end of the world, but its annoying.
- Thread starter
- #1,071
No, that's not something the YotaMD shell should be affecting. The YotaMD range has been thoroughly tested and is equal or better than the OEM shell. button clearance should be just fine. If it's an aftermarket remote perhaps the buttons are shaped slightly different? That's not something I've ever seen, but is my best guess without seeing it.
-Andy
Not aftermarket - 100% OEM.
Its not a range issue - the red light doesn't light up, so the button isn't getting depressed or the remote isn't seeing that its getting pressed, even though I am pressing it.
- Thread starter
- #1,073
That's strange. That should not have anything to do with the YotaMD kit.
Gotcha thanks, doesn't make much sense to me because when I tried it out of the case it was working more consistently, but that was a while back. I'll test it again. Either way, thanks for weighing in, I figured I might luck out and you had a solution.
@Roosevelt T try to put a small paper “shim” between the back of the remote and the shell. Maybe you have to fold it over once even. My old 99 had this issue when changing key shells and that fixed it.
Hi!
Does anyone happen to know if this european Land Cruiser HDJ100 key will work with the YMD1 2 button case just fine?
Cheers
Does anyone happen to know if this european Land Cruiser HDJ100 key will work with the YMD1 2 button case just fine?
Cheers
- Thread starter
- #1,078
Yes, that's the intended use for that 2 button remote. I've got lots of 2 button European customers. Probably a few hundred people by now.
Thanks for posting up pics! That looks great!
- Thread starter
- #1,079
Limited Run UZJ100 color is available now. I ran a batch of 50 of these and that's all I plan to run in the near future. These have the facebook group's UZJ100 logo/badge engraved in the back.
UZJ100 LIMITED RUN PRE-ORDER 2022! - YMD1 - Titanium Reinforced Toyota/Lexus Key Kit
Estimated shipping start date: Oct 10, 2021 for black and Alberta Neon. Other Cerakote colors will follow. Reuse your current remote buttons and key with this functional and beautiful upgrade. No locksmith. No reprogramming. Easy, fast install. Repair your broken key once and for all. All parts...
www.yotamd.com
Awesome! Thank you very much!
