What Did You Do with Your 80 This Weekend? (59 Viewers)

[OffRoadScott]

This is the first time in a while I have worked on the Land Cruiser. I started pulling the PS reservoir to allow the hoses to drain then I jumped over to tackle the wire harness. Got to a good stopping point then called @Cruiserhiggs and agreed on him getting this thing fixed. I also had a little company, our Dutch Sheperd/Belgian Malinois pup loves to hang without with me no matter what.

 

[LC97MD]

Interior is nearing completion and then I’ll do some work where it really counts... got some great battery cables from @Fourrunner that I’ll hopefully get to this coming weekend!

 

[on the rocks]

Mounted up some big brake/ rotors, test fit some Raceline B/L and 37's. All fits and took a quick spin but far from working...

 

[gixxerjasen]

View attachment 2572270
Interior is nearing completion and then I’ll do some work where it really counts... got some great battery cables from @Fourrunner that I’ll hopefully get to this coming weekend!

The knife holder is a nice touch.

 

[steffan]

I did driver side and kept the remains of my tired gasket and then just put silicone on all the screw holes/clips. So far so good, didn't leak during the most recent storm.

Did the same to the passanger side as I had a little lake going on in the bottom of the quarter panel. Been cleaning up previous owners halfway done fixes. Noticed a clip and a clear house just hanging and couldn't find too much info though search. Anyone know exactly what they are for?

View attachment 2571480

rear window squirter, no?

 

[SHREG]

Took a spin around Joshua Tree National Park. Headed to KOH on Wednesday. Figured id burn through some $4 gas and see if it was that much better.

 

[elbobino]

rear window squirter, no?

That's what I thought first but previous owner did some rust repair in the quarter so wasn't sure if the hose was supposed to go up the tailgate like the DS does? My first 80 so trying to figure out what's normal and not normal. Bellow is what the drivers side looks like

 

[cody c]

Mounted up some big brake/ rotors, test fit some Raceline B/L and 37's. All fits and took a quick spin but far from working...


View attachment 2572286View attachment 2572287

What brake rotors are those off of?

 

[vsatking]

Took a spin around Joshua Tree National Park. Headed to KOH on Wednesday. Figured id burn through some $4 gas and see if it was that much better.

View attachment 2572355

I grew up in Yucca Valley. Great to see a pic of the area. There are some epic off reading in that area.

 

[highsierra4x4]

Mounted up some big brake/ rotors, test fit some Raceline B/L and 37's. All fits and took a quick spin but far from working...


View attachment 2572286View attachment 2572287

Is this a kit or did you fab it up your self?

 

[SqueakyCleanDave]

Took it up Hull Mountain

 

[BILT4ME]

That's what I thought first but previous owner did some rust repair in the quarter so wasn't sure if the hose was supposed to go up the tailgate like the DS does? My first 80 so trying to figure out what's normal and not normal. Bellow is what the drivers side looks like

View attachment 2572360

Those are hoses for 80 series with ambulance doors and window squirters. They are installed in all, but not used.

 

[on the rocks]

Brake upgrade- this is on a thread started by Dirty Koala and some others converting some 5th gen 4runner front brakes. I just got the idea to take it to the next level off their research These are tundra rotors and Wilwood 6 piston calipers, butchered the kit they have available for the 2014 4runner. Not sure if I'm doing this correct but here is the link. 17" rims might fit but not 100% sure, I tried my 18' and they fit fine and they spec 18's also. I'll follow up a bit more on the thread once I get them fine tuned, pedal feel still a little soft but need to do a full bleed yet.

I Like Big Brakes and I Cannot Lie!!! - https://forum.ih8mud.com/threads/i-like-big-brakes-and-i-cannot-lie.1203263/

 

[adamgunn]

This is the first time in a while I have worked on the Land Cruiser. I started pulling the PS reservoir to allow the hoses to drain then I jumped over to tackle the wire harness. Got to a good stopping point then called @Cruiserhiggs and agreed on him getting this thing fixed. I also had a little company, our Dutch Sheperd/Belgian Malinois pup loves to hang without with me no matter what.

View attachment 2571932

View attachment 2571933

View attachment 2571934

View attachment 2571935

I just ordered a new wire harness, any tips for the job?!

 

[davidp14]

View attachment 2572270
Interior is nearing completion and then I’ll do some work where it really counts... got some great battery cables from @Fourrunner that I’ll hopefully get to this coming weekend!

did you wrap that wheel yourself? Looks good. I still have a leather cover sitting in my "parts bin" waiting for me to tackle.

 

[Fj81]

Looks good

Thanks, it is a little taller than usual the way I installed it. But I find that I dont lean sideways to rest on the console like I did with the stock one.

 

[fj80rodngun]

Added hood prop rod

 

[LC97MD]

did you wrap that wheel yourself? Looks good. I still have a leather cover sitting in my "parts bin" waiting for me to tackle.

I lucked out with that from the previous owner (but I was left several other “gifts” to make right in return... still in discovery mode, I fear).

 

[vsatking]

I lucked out with that from the previous owner (but I was left several other “gifts” to make right in return... still in discovery mode, I fear).

I wrapped my 100 wheel. It was fairly easy but it did take some time. The kit worked really well and fit well.

 

[vsatking]

Added hood prop rod

View attachment 2573269

View attachment 2573270

Can we get a poser shot of your truck. I dig that root beer color!