What Did You Do with Your 80 This Weekend? (73 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

J,

Where are the spring loaded pins that go on the swing arm hubs?

J

Sitting in the back of my truck. The powder coater got a little overzealous and got some in the swing arm hubs. It was late and I didn’t feel like chasing them last night. Will get to it tonight or tomorrow.
 
I did not have a parking pass, so my 80 was parked in a parking garage, but I tailgated next to a FJ62!
IMG_8612.webp
IMG_8611.webp
 
This is Florida. We don't have rocks...:frown:
 
This is Florida. We don't have rocks...:frown:

therell be a bunch of cruisers at Hard Rock in ocala next weekend.. theres rocks there.. its in an old quarry..
 
therell be a bunch of cruisers at Hard Rock in ocala next weekend.. theres rocks there.. its in an old quarry..
I’ve been there twice. It’s the antithesis of ih8mud.
 
therell be a bunch of cruisers at Hard Rock in ocala next weekend.. theres rocks there.. its in an old quarry..
I'm planning on being there. It will be my first time at Hard Rock.
 
Coolants good in the 95' and 96'... now to work on the 92'... it never ends...its got a long list of shizzzz
 
How much did you use? Did you do any prep work first or just lay it down?
thanks

No real prep - I had pressure washed underneath a few days earlier after a mucky day of wheeling, so it was relatively clean.
Took each wheel off to get max access to the wheel wells. Used a bit more than a quarter of a gallon. And I laid it on fairly thick.
 
No real prep - I had pressure washed underneath a few days earlier after a mucky day of wheeling, so it was relatively clean.
Took each wheel off to get max access to the wheel wells. Used a bit more than a quarter of a gallon. And I laid it on fairly thick.

I really need to do this, I'm probably going to have to take it somewhere just to get it done before they start salting.
 

Users who are viewing this thread

Back
Top Bottom