gofast
SILVER Star
Cool write up. Subbed. Want see what happens with motor. Met Tor once a Cruise Moab
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Pretty sure I should actually start putting parts on the truck before I completely take over the dining room. Already ran out of room in the garage.
View attachment 2440127
Hey Feldrian, nice work on your axle. I'm thinking of doing the same next year. I'm local to you, who did you use to replace the bushings? Thanks in advanceAlso dropped the front panhard and new bushings off at the shop to be pressed ... No way was that working out in a home garage with a bench vice and a sledge hammer.
It's not a stash, it's a workplace accommodation. How else are we supposed to stay sane now we all work from home, urr, I mean live at work?I’ll be right over to help (you drink that liquor)!
Happy to help!Kinda think I need to come by. I’ll bring Rose our 97 LX450. I have a feeling you could teach me quite a bit. We are in Maple Valley and we’ve had ours about 6 months. Not near the build you have.
Great work
I decided to install the coils since I had them anyway and absolute worst case I'd be out $150 for a new knuckle. The process was WAY easier than I was expecting. Took about 45 min all up for both coils, including me messing up the first insert. Installed the caliper and torqued to 90 lb-ft no problem.Time to return it and get the right stuff. Thanks for the heads up on cost.