- Thread starter
- #701
Recreating the heat shield bracket,
Builds Rebuilding a 40 but no longer in a 1 car garage. (1 Viewer)
- Thread starter waiting for time
- Start date
-
- Tags
- fj40
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #702
After some cleaning.
- Thread starter
- #703
Had to run an errand for my wife and she let me go by myself. There happend to be an addult playstore close by and I packed up this item on the way.
- Thread starter
- #704
Next patch Fitted.
And welded.
And welded.
- Thread starter
- #705
Excellent work. I need to make that heat shield bracket aswell as my 40 was missing it. Do you have the dinensions of the original?
- Thread starter
- #707
I will try and measuere it this evening when I”m there.
Thank you
- Thread starter
- #709
- Thread starter
- #710
This should cover all sizes (in cm)
Not able to make a drawing at the moment, let me know if this works for you. If not I can make drawing later.
Not able to make a drawing at the moment, let me know if this works for you. If not I can make drawing later.
Those pics look great!
Wow! All this to restore 1 Land Cruiser? I hope not. That system is amazing! Mine just a bit less sophisticated I guess...
- Thread starter
- #713
Last edited:
- Thread starter
- #714
Spend some time cleaning and reorganising, still difficult as the tub is hanging in the middle if the shop.
Started with the jig today, cut some steel for the main frame. It will be bolted together so it can be stored when not in use.
Next up is some pieces to cut out.
Started with the jig today, cut some steel for the main frame. It will be bolted together so it can be stored when not in use.
Next up is some pieces to cut out.
- Thread starter
- #715
Patch panels made.
- Thread starter
- #716
Hole cut and patch shaped.
- Thread starter
- #717
And patch tacked in.
Driver floor looks good
- Thread starter
- #719
Thanks, it was a tricky piece to make.
- Thread starter
- #720
Steel for the jig cut.
First holes drilled and treaded inserts in and sunk into the plates.
First holes drilled and treaded inserts in and sunk into the plates.
Similar threads
