Builds Old Landy: An HJ45 Story/Build Thread (2 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

After making sure everything was good (all up to spec) which they were we started measuring the stem guide holes, and they came out really good! The engine seems to be in really good condition. I did make a spread sheet (@CaptClose :)) of this so I will post that and a full engine report on what we did.

B2F5A1E7-F2EB-46A9-8664-19422F4FDBC2.jpeg


146733A9-6789-453E-9977-DD1A145B3210.jpeg


558998E1-C7FC-45F2-BF54-4723F7A8E803.jpeg


A23DEBD7-33FF-4AA2-B727-76FBBA50C262.jpeg
 
Cylinder 1 - Good
  • Spring Trueness :rofl:
  • Inner Spring Intake ( 44.40mm / FSM - 44.30mm)
  • Outer Spring Intake (48.12mm / FSM - 48.10mm)
  • Inner Spring Exhaust ( 44.27mm / FSM - 44.30mm)
  • Outer Spring Exhaust ( 48.11mm / FSM - 48.10mm)
  • Valve Stem Diameter Intake ( Avg. 9.00mm / FSM 8.973mm -8.989mm)
  • Valve Stem Diameter Exhaust ( Avg. 8.99mm / FSM 8.954mm - 8.970mm )
  • Stem Guide Diameter ( 9.03mm / FSM 9.101mm - 9.030mm )
  • Valve Oil Clearance Intake ( 0.03mm / FSM - 0.10mm MAX)
  • Valve Oil Clearance Exhaust ( 0.04mm / FSM - 0.12mm MAX)
Cylinder 2 - Good
  • Spring Trueness :rofl:
  • Inner Spring Intake ( 44.00mm / FSM - 44.30mm)
  • Outer Spring Intake ( 48.19mm / FSM - 48.10mm)
  • Inner Spring Exhaust ( 43.86mm /FSM - 44.30mm)
  • Outer Spring Exhaust ( 47.99mm / FSM - 48.10mm)
  • Valve Stem Diameter Intake ( Avg. 9.00mm / FSM 8.973mm -8.989mm)
  • Valve Stem Diameter Exhaust ( Avg. 9.01mm / FSM 8.954mm - 8.970mm )
  • Stem Guide Diameter ( 9.03mm / FSM 9.101mm - 9.030mm )
  • Valve Oil Clearance Intake ( 0.03mm/ FSM - 0.10mm MAX)
  • Valve Oil Clearance Exhaust ( 0.02mm/ FSM - 0.12mm MAX)
Cylinder 3 - Good
  • Spring Trueness :rofl:
  • Inner Spring Intake ( 44.99mm / FSM - 44.30mm)
  • Outer Spring Intake ( 48.22mm / FSM - 48.10mm)
  • Inner Spring Exhaust ( 44.03mm / FSM - 44.30mm)
  • Outer Spring Exhaust ( 48.08mm / FSM - 48.10mm)
  • Valve Stem Diameter Intake ( Avg. 8.98mm / FSM 8.973mm -8.989mm)
  • Valve Stem Diameter Exhaust ( Avg. 8.99mm / FSM 8.954mm - 8.970mm )
  • Stem Guide Diameter ( 9.03mm / FSM 9.101mm - 9.030mm )
  • Valve Oil Clearance Intake ( 0.05mm / FSM - 0.10mm MAX )
  • Valve Oil Clearance Exhaust ( 0.04mm / FSM - 0.12mm MAX )
Cylinder 4 - Good
  • Spring Trueness :rofl:
  • Inner Spring Intake ( 44.22mm / FSM - 44.30mm)
  • Outer Spring Intake ( 48.02mm / FSM - 48.10mm)
  • Inner Spring Exhaust ( 44.12mm / FSM - 44.30mm)
  • Outer Spring Exhaust ( 48.10mm / FSM - 48.10mm)
  • Valve Stem Diameter Intake ( Avg. 8.98mm / FSM 8.973mm -8.989mm)
  • Valve Stem Diameter Exhaust ( Avg. 8.99mm / FSM 8.954mm - 8.970mm )
  • Stem Guide Diameter ( 9.03mm / FSM 9.101mm - 9.030mm )
  • Valve Oil Clearance Intake ( 0.05mm / FSM - 0.10mm MAX )
  • Valve Oil Clearance Exhaust ( 0.04mm / FSM - 0.12mm MAX )
Cylinder 5 - Good
  • Spring Trueness :rofl:
  • Inner Spring Intake ( 44.02mm / FSM - 44.30mm)
  • Outer Spring Intake ( 48.28mm / FSM - 48.10mm)
  • Inner Spring Exhaust ( 43.99mm / FSM - 44.30mm)
  • Outer Spring Exhaust ( 48.30mm / FSM - 48.10mm)
  • Valve Stem Diameter Intake ( Avg. 8.99mm / FSM 8.973mm -8.989mm)
  • Valve Stem Diameter Exhaust ( Avg. 8.99mm/ FSM 8.954mm - 8.970mm )
  • Stem Guide Diametere ( 9.03mm / FSM 9.101mm - 9.030mm )
  • Valve Oil Clearance Intake ( 0.04mm / FSM - 0.10mm MAX )
  • Valve Oil Clearance Exhaust ( 0.04mm / FSM - 0.12mm MAX )
Cylinder 6 - Good
  • Spring Trueness :rofl:
  • Inner Spring Intake ( 44.30mm / FSM - 44.30mm)
  • Outer Spring Intake ( 48.19mm / FSM - 48.10mm)
  • Inner Spring Exhaust ( 44.10mm / FSM - 44.30mm)
  • Outer Spring Exhaust ( 48.13mm / FSM - 48.10mm)
  • Valve Stem Diameter Intake ( Avg. 8.98mm / FSM 8.973mm -8.989mm)
  • Valve Stem Diameter Exhaust ( Avg. 8.99mm / FSM 8.954mm - 8.970mm )
  • Stem Guide Diametere ( 9.03mm / FSM 9.101mm - 9.030mm )
  • Valve Oil Clearance Intake ( 0.05mm / FSM - 0.10mm MAX)
  • Valve Oil Clearance Exhaust ( 0.04mm / FSM - 0.12mm MAX)
Not bad for 300,000 miles!! This too a heck of a lot of time, at least now I know it's good. :)
 
Last edited:
Since it was all good we took the cylinder head to the machine shop for valve and seat grinding/hot dip and re-assembly with new valve guide stem seals. We are re-using all springs, valves, and valve guides. We took a look around the shop, and learned a good deal from Mario! It might be my future internship in the summer, or your place @Yackster!:)

64A93CFE-0376-4C8D-A7C7-3494488A26D4.jpeg


591DEB98-5CB5-4B1F-9FDE-FB761CB67A8C.jpeg


BC1435B4-2133-4ED9-BD54-C74A2B1F9149.jpeg


D8860A32-6959-498F-88F7-D1DF510B2318.jpeg


882147E9-FF9F-4AEC-95B0-55B35B103F24.jpeg
 
We realized we had not taken any injector pictures so here they are. We plan on taking them in for a rebuild!

5746E0AC-07B4-4CCA-B1BC-F3F6568D875E.jpeg


25FBCBD8-DDCB-4334-88BC-A805BBBDFCCB.jpeg


E7F61513-5AF7-4F7F-8591-319EA6D23017.jpeg


E7CF9232-DC17-49AB-BBC7-C66E8040DCE3.jpeg


4C53713F-EBA3-48DE-975C-66FC90097A17.jpeg
 
They all look fairly good, but want to check the squirt pattern too.
 
Cowboy45 said:
Cylinder 1 - Good
  • Spring Trueness :rofl:
  • Inner Spring Intake ( 44.40mm / FSM - 44.30mm)
  • Outer Spring Intake (48.12mm / FSM - 48.10mm)
  • Inner Spring Exhaust ( 44.27mm / FSM - 44.30mm)
  • Outer Spring Exhaust ( 48.11mm / FSM - 48.10mm)
  • Valve Stem Diameter Intake ( Avg. 9.00mm / FSM 8.973mm -8.989mm)
  • Valve Stem Diameter Exhaust ( Avg. 8.99mm / FSM 8.954mm - 8.970mm )
  • Stem Guide Diameter ( 9.03mm / FSM 9.101mm - 9.030mm )
  • Valve Oil Clearance Intake ( 0.03mm / FSM - 0.10mm MAX)
  • Valve Oil Clearance Exhaust ( 0.04mm / FSM - 0.12mm MAX)
Cylinder 2 - Good
  • Spring Trueness :rofl:
  • Inner Spring Intake ( 44.00mm / FSM - 44.30mm)
  • Outer Spring Intake ( 48.19mm / FSM - 48.10mm)
  • Inner Spring Exhaust ( 43.86mm /FSM - 44.30mm)
  • Outer Spring Exhaust ( 47.99mm / FSM - 48.10mm)
  • Valve Stem Diameter Intake ( Avg. 9.00mm / FSM 8.973mm -8.989mm)
  • Valve Stem Diameter Exhaust ( Avg. 9.01mm / FSM 8.954mm - 8.970mm )
  • Stem Guide Diameter ( 9.03mm / FSM 9.101mm - 9.030mm )
  • Valve Oil Clearance Intake ( 0.03mm/ FSM - 0.10mm MAX)
  • Valve Oil Clearance Exhaust ( 0.02mm/ FSM - 0.12mm MAX)
Cylinder 3 - Good
  • Spring Trueness :rofl:
  • Inner Spring Intake ( 44.99mm / FSM - 44.30mm)
  • Outer Spring Intake ( 48.22mm / FSM - 48.10mm)
  • Inner Spring Exhaust ( 44.03mm / FSM - 44.30mm)
  • Outer Spring Exhaust ( 48.08mm / FSM - 48.10mm)
  • Valve Stem Diameter Intake ( Avg. 8.98mm / FSM 8.973mm -8.989mm)
  • Valve Stem Diameter Exhaust ( Avg. 8.99mm / FSM 8.954mm - 8.970mm )
  • Stem Guide Diameter ( 9.03mm / FSM 9.101mm - 9.030mm )
  • Valve Oil Clearance Intake ( 0.05mm / FSM - 0.10mm MAX )
  • Valve Oil Clearance Exhaust ( 0.04mm / FSM - 0.12mm MAX )
Cylinder 4 - Good
  • Spring Trueness :rofl:
  • Inner Spring Intake ( 44.22mm / FSM - 44.30mm)
  • Outer Spring Intake ( 48.02mm / FSM - 48.10mm)
  • Inner Spring Exhaust ( 44.12mm / FSM - 44.30mm)
  • Outer Spring Exhaust ( 48.10mm / FSM - 48.10mm)
  • Valve Stem Diameter Intake ( Avg. 8.98mm / FSM 8.973mm -8.989mm)
  • Valve Stem Diameter Exhaust ( Avg. 8.99mm / FSM 8.954mm - 8.970mm )
  • Stem Guide Diameter ( 9.03mm / FSM 9.101mm - 9.030mm )
  • Valve Oil Clearance Intake ( 0.05mm / FSM - 0.10mm MAX )
  • Valve Oil Clearance Exhaust ( 0.04mm / FSM - 0.12mm MAX )
Cylinder 5 - Good
  • Spring Trueness :rofl:
  • Inner Spring Intake ( 44.02mm / FSM - 44.30mm)
  • Outer Spring Intake ( 48.28mm / FSM - 48.10mm)
  • Inner Spring Exhaust ( 43.99mm / FSM - 44.30mm)
  • Outer Spring Exhaust ( 48.30mm / FSM - 48.10mm)
  • Valve Stem Diameter Intake ( Avg. 8.99mm / FSM 8.973mm -8.989mm)
  • Valve Stem Diameter Exhaust ( Avg. 8.99mm/ FSM 8.954mm - 8.970mm )
  • Stem Guide Diametere ( 9.03mm / FSM 9.101mm - 9.030mm )
  • Valve Oil Clearance Intake ( 0.04mm / FSM - 0.10mm MAX )
  • Valve Oil Clearance Exhaust ( 0.04mm / FSM - 0.12mm MAX )
Cylinder 6 - Good
  • Spring Trueness :rofl:
  • Inner Spring Intake ( 44.30mm / FSM - 44.30mm)
  • Outer Spring Intake ( 48.19mm / FSM - 48.10mm)
  • Inner Spring Exhaust ( 44.10mm / FSM - 44.30mm)
  • Outer Spring Exhaust ( 48.13mm / FSM - 48.10mm)
  • Valve Stem Diameter Intake ( Avg. 8.98mm / FSM 8.973mm -8.989mm)
  • Valve Stem Diameter Exhaust ( Avg. 8.99mm / FSM 8.954mm - 8.970mm )
  • Stem Guide Diametere ( 9.03mm / FSM 9.101mm - 9.030mm )
  • Valve Oil Clearance Intake ( 0.05mm / FSM - 0.10mm MAX)
  • Valve Oil Clearance Exhaust ( 0.04mm / FSM - 0.12mm MAX)
Not bad for 300,000 miles!! This too a heck of a lot of time, at least now I know it's good. :)
Click to expand...

This would make Andre proud. A little bit of Swiss precision.
 
Nice job on the measuring of the head components.
What might be interesting is to see if the spring compression rate is still equal.
You can use a weight or a scale to press each spring with the same force and measure the length then.
 
Cowboy45 said:
After making sure everything was good (all up to spec) which they were we started measuring the stem guide holes, and they came out really good! The engine seems to be in really good condition. I did make a spread sheet (@CaptClose :)) of this so I will post that and a full engine report on what we did.

View attachment 1883750

View attachment 1883751

View attachment 1883752

View attachment 1883753
Click to expand...
What is the name of this tool you're using to measure the diameter of the guide? Not the digital caliper but the item you're inserting?

-Geoff
 
jgeoffr said:
What is the name of this tool you're using to measure the diameter of the guide? Not the digital caliper but the item you're inserting?

-Geoff
Click to expand...

Bore diameter gauge. @Cowboy45 explains a bit about how it works. It is the gauges in the red case on pg 26. Attached a couple of pics.

6853D268-D731-4730-899C-A9E69A329F20.jpeg


4EE110F5-DF59-45C3-81EF-D66697F7BFCC.jpeg


CE3C105C-B918-4654-B288-ACBE27914525.jpeg
 
Getting away from the engine rebuild for a few moments to capture life’s moments. I shared with @Cowboy45 this evening that this is one of my favorite pics of him. Star Wars shirt was a cherry on top. He is cracking open the crate containing the engine we are currently rebuilding for Old Landy.

F307F749-EBE1-4858-90AB-1FADDB4B65ED.jpeg
 
Reminded me of the pic at the Landcruiser Museum that struck me.

ACD44075-2E4A-4359-B078-3DCFBCEE033F.jpeg
 
That is my hands-down favorite photo in the museum. I put it there.
 
I am forever greatful to @CaptClose for trustingly letting @Cowboy45 reset the wheel bearing preload on his 80 while heading to SAS2. This is the moment @Cowboy45 caught the bug about cruisers. I shared my favorite pic of @Cowboy45 with @CaptClose moments ago who in turn shared this pic capturing the “disease” moment.

@roma042987, @POTATO LAUNCHER, @cornboy, @CenTXFJ60 and @76 FJ40 treated him with trust and showed him how. It’s more than cruisers. Family. Nothing like a mini knuckle job to rally around.

7C55C6F2-E709-499C-82C3-C987F005FB86.jpeg
 
Last edited:
I go on to share the pic @CaptClose sent me with @Cowboy45. He remembers the moment.

Priceless.

56A53F47-5ADA-4D16-A377-D2C8D731F139.png
 
I share with @CaptClose. We banter. Me in blue. Him in grey. Mic drop....Amen.

86456AD5-7955-4761-926D-CF2E767B834B.jpeg
 
You must log in or register to reply here.

Similar threads

7schulz
79 FJ45 Troopy Build “Olive”
Replies
9
Views
2K
greenbeast
greenbeast
Bella1992
Smooth old chrome hubcaps for the front axle
Replies
1
Views
456
Bella1992
Bella1992
scoobiedubes
Anyone found an FJ45LV fuel plug that works well?
Replies
7
Views
933
mderrick
mderrick
DickM
Dick's '84 Saudi 45
3 4 5
Replies
94
Views
11K
DickM
DickM

Users who are viewing this thread

Total: 3 (members: 0, guests: 3)

Share this page

Back
Top Bottom