Official ONSC member buying/selling thread (6 Viewers)

[lt1fire]

Just bought Nathan a well-used '99 LC100. Looking for 100 series LC stuff (Not LX):

Need one OEM wheel center cap for LC 16" wheel
Need rear panel access door for jack and tool kit in gray
Need passenger side headlight glass assembly
Need front corner lenses in decent shape

PM me if you have anything. If you have other 100 series stuff not mentioned, PM me. I may want.

Thanks,

Wow he is old enough to drive now??

 

[roadstr6]

Wow he is old enough to drive now??

He will be 16 on November 1st. He has his permit now.

 

[Ncrunner4x4]

Just bought Nathan a well-used '99 LC100. Looking for 100 series LC stuff (Not LX):

Need one OEM wheel center cap for LC 16" wheel
Need rear panel access door for jack and tool kit in gray
Need passenger side headlight glass assembly
Need front corner lenses in decent shape

PM me if you have anything. If you have other 100 series stuff not mentioned, PM me. I may want.

Thanks,

"Purchased for Nathan" did you mean Dave? Haha! Congrats to him thats a great first vehicle. I will have some 295/16 tires with only a few thousand miles on them coming up for sale soon if you need tires will give you a good deal.

 

[roadstr6]

"Purchased for Nathan" did you mean Dave? Haha! Congrats to him thats a great first vehicle. I will have some 295/16 tires with only a few thousand miles on them coming up for sale soon if you need tires will give you a good deal.

Interested in the 295's. Let me know. Thanks, Thomas!

 

[cwags12]

do you have a different 40 hood to trade? I have a single piece hood I would trade for a split hood

Yes. I have a split hood with chrome spear intact. No rust. No dents.

 

[cruisermatt]

Yes. I have a split hood with chrome spear intact. No rust. No dents.

I’ll PM you. I have a nice single piece hood and need to get up there to trade a different hood with @SFROMAN.

 

[S4Cruiser]

I’ll PM you. I have a nice single piece hood and need to get up there to trade a different hood with @SFROMAN.

I have a split hood no spear no rust that I would trade for a non split hood in similar condition.

 

[cruisermatt]

I have a split hood no spear no rust that I would trade for a non split hood in similar condition.

sounds good Jon. Will keep that in mind if it doesn’t work out between @cwags12

to further confuse… I was planning to trade back the green split hood (which is dented from @little_joe rollover ) with Del who has my matching white split hood, but might make more sense for me for yours or @cwags12 to go to him so I can use the dented one on my crawler where it will likely get dented again? Sorry if that’s super confusing.

TLDR send me pics

 

[40LandCruising]

Looking for some soft top corner brackets. I have a STC soft top for the blue 40 (For everyone who doesn’t know I bought @HENDOG ’s blue 40!!) and I am missing the corner brackets for the tub. I have some corner brackets for an old bestop my dad and I have yet to install on the green 40 that I could cut down to fit but then I’d need more for the green 40.

So I either need a pair of Best top corner brackets or a pair of STC corner brackets. I’m sure someone has some lying around.

 

[Hokie LX]

If anyone sees or has a lead on a decent 60 out there let me know. Been searching for one to have as a project to wrench on. Running or not running works for me. Been keeping an eye out for a solid starting point.

Thanks!

 

[Comet]

Wanted: Top for a 40 series. I have the doors, sides ,and ambulance doors. Apparently the top I purchased outside of Pittsburgh did not stay attached to the 40 series that was under it. Dad, tie things down next time!!!! 1975/76 vintage. Given the state of the rest of the truck, condition does not have to be perfect, or even pretty..

 

[S4Cruiser]

Have a set of new Aisin hub inner longfield gears for sale. Longfield Chromoly Inner Hub Gears - Fits 1979-1/1997 4x/5x/6x/7x/8x Series w/Aisin Hubs - https://cruiserteq.com/longfield-chromoly-inner-hub-gears-fits-1979-1-1997-4x-5x-6x-7x-8x-series-w-aisin-hubs/

$100

 

[SFROMAN]

Wanted: Top for a 40 series. I have the doors, sides ,and ambulance doors. Apparently the top I purchased outside of Pittsburgh did not stay attached to the 40 series that was under it. Dad, tie things down next time!!!! 1975/76 vintage. Given the state of the rest of the truck, condition does not have to be perfect, or even pretty..

I have a top for sale. It is off my 71. The sides only have surface rust. The problem is the top channel where the fiberglass connects to the sides. That part is gone.
I have two fiberglass tops that you can make one out of them.

 

[NCFJ]

I have a fiberglass top for a 40. It's rough and it's free!

 

[stevezero]

Wanted feeler... Searching for a set of 16 inch tires for my daughter's 80 series. Can be stock size up to 285/75/16. Prefer AT or even street tread.

 

[roadstr6]

Wanted feeler... Searching for a set of 16 inch tires for my daughter's 80 series. Can be stock size up to 285/75/16. Prefer AT or even street tread.

Nathan might have something for you. He wants bigger MT's. He will be upgrading soon.

 

[stevezero]

@roadstr6 sweet, Dave! Let me know when you guys are ready to roll. we arent in a huge rush, but I know they will need tires this year

 

[Ncrunner4x4]

1 free BFG KM2 285/75/16, lots of tread left was a spare and I just changed to 35s and no longer need. No plugs/patches.

located in South Charlotte

 

[JohnVee]

@Ncrunner4x4 Perfect! I can put that to use. Can pick up after the weekend.

 

[Ncrunner4x4]

Sounds good it is yours, I will be home but if not will leave outside for you.