Official For Sale/Trade/WTB/Free Thread (2 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

@bkfj40 I may be interested in the scout box. What’s the $$

does the split hood have a good spar?
 
$50 for the scout box.

I would have to look at the hood at my office. I’m hunkered down in the mountains.
 
Hey guys, I have a 1999 Landcruiser for sale. Replacing it with the new 2020 Prem TRD 4Runner. The Landcruiser is Green, 290,000 miles, just had the alternator replaced, potentially comes with a pair of snow/winter tires for the right price. Asking 4,000 for her. DM for details or pictures if serious.
 
Guys, I need to place an order for another set of my 3/16 quarter panels and I can get some more u-bolt skid plates made up at the same time.
Price is $375 for the pair of quarters with rockers and I am selling sets of four (4) u bolt skids for $100. All come in raw steel. I can bring with me to the Relic Run if anyone is interested.

You can check out my Lynchburg Lemonade thread to see what the quarters look like installed.

Thanks,
Rob
 
 
All, not really much of a poster here, but was relatively new to the 100-series club...and I-395 took it away from me. 2006 LC was merged into and the center of a 4-car collision the other week. It was just marked as total loss and will be looking for a replacement soon (200-series, likely). In the meantime, putting a feeler out for some parts that were never installed (some purchased as little as 1-2 months ago). Hoping for local sale before trying the larger classifieds with shipping implications. Reasonable offers entertained.

2" Tough Dog Kit from Trail Tailor:
TD 41MM front and 45MM adjustable rear shocks
TD Torsion Bars and LCA Bracket reinforcements
0-660 LB Load Dual Rate Coil Springs (gold)

Diff Drop Kit: SOLD (Trail Tailor kit)
Extended F&R Sway Bar End Links: (Trail Tailor kit)
SPC 25455 UCAs: SOLD

LCAs and bushings
-- bought online from Toyota dealerships March 2020. My truck had 208k and wanted to replace all ball joints and bushings without the headache/work.
OEM Front LCAs (P/Ns 48620-60010 and 48640-60010): $600 for pair
OEM LCA Frame Bushing ("No. 2 trailing," P/N 48655-60010) $100 for pair

Rather keep all the TD items together (shocks/springs/TBs). Any other items can split up. Happy to work a deal if someone goes all-in. If I happen to find a 100-series that fits the bill, I may end up keeping and following through with the lift. Otherwise, someone is getting to enjoy all NIB parts for the truck. Pics available on request but not much to look at.
 
Last edited:
All, not really much of a poster here, but was relatively new to the 100-series club...and I-395 took it away from me. 2006 LC was merged into and the center of a 4-car collision the other week. It was just marked as total loss and will be looking for a replacement soon (200-series, likely). In the meantime, putting a feeler out for some parts that were never installed (some purchased as little as 1-2 months ago). Hoping for local sale before trying the larger classifieds with shipping implications. Reasonable offers entertained.

2" Tough Dog Kit from Trail Tailor: $1000
TD 41MM front and 45MM adjustable rear shocks
TD Torsion Bars and LCA Bracket reinforcements
0-660 LB Load Dual Rate Coil Springs (gold)

Diff Drop Kit: $175 (Trail Tailor kit)
Extended F&R Sway Bar End Links: $200 (Trail Tailor kit)
SPC 25455 UCAs: $550

LCAs and bushings
-- bought online from Toyota dealerships March 2020. My truck had 208k and wanted to replace all ball joints and bushings without the headache/work.
OEM Front LCAs (P/Ns 48620-60010 and 48640-60010): $600 for pair
OEM LCA Frame Bushing ("No. 2 trailing," P/N 48655-60010) $100 for pair

Rather keep all the TD items together (shocks/springs/TBs). Any other items can split up. Happy to work a deal if someone goes all-in. If I happen to find a 100-series that fits the bill, I may end up keeping and following through with the lift. Otherwise, someone is getting to enjoy all NIB parts for the truck. Pics available on request but not much to look at.
@afgman786
 
Free - (or beerz) FJ40 step, beefed up by previous owner

pick up in Frederick
B772E5D8-6964-461E-8B91-B46B80584124.webp
 
All, not really much of a poster here, but was relatively new to the 100-series club...and I-395 took it away from me. 2006 LC was merged into and the center of a 4-car collision the other week. It was just marked as total loss and will be looking for a replacement soon (200-series, likely). In the meantime, putting a feeler out for some parts that were never installed (some purchased as little as 1-2 months ago). Hoping for local sale before trying the larger classifieds with shipping implications. Reasonable offers entertained.

2" Tough Dog Kit from Trail Tailor: $1000
TD 41MM front and 45MM adjustable rear shocks
TD Torsion Bars and LCA Bracket reinforcements
0-660 LB Load Dual Rate Coil Springs (gold)

Diff Drop Kit: $175 (Trail Tailor kit)
Extended F&R Sway Bar End Links: $200 (Trail Tailor kit)
SPC 25455 UCAs: $550

LCAs and bushings
-- bought online from Toyota dealerships March 2020. My truck had 208k and wanted to replace all ball joints and bushings without the headache/work.
OEM Front LCAs (P/Ns 48620-60010 and 48640-60010): $600 for pair
OEM LCA Frame Bushing ("No. 2 trailing," P/N 48655-60010) $100 for pair

Rather keep all the TD items together (shocks/springs/TBs). Any other items can split up. Happy to work a deal if someone goes all-in. If I happen to find a 100-series that fits the bill, I may end up keeping and following through with the lift. Otherwise, someone is getting to enjoy all NIB parts for the truck. Pics available on request but not much to look at.
You inbox is full.... :-)
 
Leaks around transfer and tranny getting to the point that I can't avoid it any longer. Anyone have one of the earlier 3spd and transfer cases that they want to sell? My thought is that I can take my time and rebuild what I buy and when the time comes, just take a day to swap it out. Weather is starting to get nice and don't want to be without the truck for what always turns into a "took way longer than I thought" refurb of the current tranny and tc. Thanks!
 

Users who are viewing this thread

Back
Top Bottom