Land Cruiser 80 Series 3D Scans

[PeterTheBeater]

Hi All, i have the same scanner and also have some tools to clean said scans. However I only have access to a 92 HDJ81. What would you like scanned?

~Cody

How difficult would it be to scan a gutter rail?

 

[xetura]

Hi All, i have the same scanner and also have some tools to clean said scans. However I only have access to a 92 HDJ81. What would you like scanned?

~Cody

The rear quarter panel area behind the trim panel on the right side.

 

[BakerFJ]

Hi All, i have the same scanner and also have some tools to clean said scans. However I only have access to a 92 HDJ81. What would you like scanned?

~Cody

Definitely gutter rails -- If possible the full roof width.
Inner quarter panels (without trim pieces)
Headlight housing
And quarter window, if it hasn't been done yet!

If you get around to them, a big thanks in advance. One of these days I'll cough up the cheddar for my own 3D scanner

 

[PeterTheBeater]

Definitely gutter rails -- If possible the full roof width.
Inner quarter panels (without trim pieces)
Headlight housing
And quarter window, if it hasn't been done yet!

If you get around to them, a big thanks in advance. One of these days I'll cough up the cheddar for my own 3D scanner

 

[ubguessin]

Hi All, i have the same scanner and also have some tools to clean said scans. However I only have access to a 92 HDJ81. What would you like scanned?

~Cody

Would you be able to scan the 80 series grille?

 

[glinskonian]

I've been looking for a cheap (ish) replacement for these interior carpet clips. Mine are busted... Wits' End has replacements but they're ~17 bucks a piece and I figured it'd be easier (and cheaper) to 3D print myself. View attachment 3414612

Here you go: (80 Series) Toyota Land Cruiser Rear Step Plate Clip by godfatherofpancakes | Download free STL model | Printables.com - https://www.printables.com/model/1049292-80-series-toyota-land-cruiser-rear-step-plate-clip

 

[Iggmon]

Happy to share a scan of the driver side quarter window as a .SLDPRT if it helps anyone!
The quality isn't very impressive but it was good enough for me to model gullwings with.

 

[Csr78]

The usable space on the inside rear hatch glass exported as a drawing!

 

[Iggmon]

I just ordered a Revopoint Trackit so expect many more scans getting uploaded later this year

 

[60 toy ota]

I just ordered a Revopoint Trackit so expect many more scans getting uploaded later this year

Not sure of its been said yet but the useless cubby for the later dash would be awesome to iterate with