xetura

Special emergency axle caps for @Feldrian

Not yet. I have to delete the PAIR system + EGR first and have been very busy with family stuff and work. I'll post updates when I'm able to get it installed.

Ok back on track! Now trying to figure out intake from turbo outlet to throttle body, it’s a tight fit center to center is only 7” front to back and will be fighting the breather on the intake. The left to right I have 5.25” face to face. Don’t...

Yeah they should all be standard. Wits End sells a bunch of different metal brackets to secure an air fitting where ever you want. I bought all of them and they all have the same size hole.

Ok, it looks like the fitting might be a bit more expensive than I anticipated. If you can get the measurements of the bracket hole where it mounts, that will work. EDIT: Nevermind... it all looks pretty standard for air fittings after doing more...

Definitely! I would just need to know what fitting needs to be secured to the panel. Then I can get my hands on one for measuring and test fitting.

https://www.scrubking.com.au/products/80-series-onboard-air-compressor-mount-under-seat-with-outlet-switch-kit Here's a good example of the ARB fitting (or similar coupler) mounted to a flat surface. I have the compressor switch mounted on my...

Thanks for the update. Will it be possible to incorporate an air compressor fitting opening into that sub enclosure panel? It would just have to be a small hole in the right size. Definitely! I would just need to know what fitting needs to be...

Not yet, still having a holiday hangover haha. I'm hoping to have something next month and will post the update here. I decided to print in PETG instead of abs due to the toxic fumes of abs and the fact that it needs a temp controlled enclosure...