Stumpalama
Forum Junkie
It tumbles, it's just that CCOT apparently made special front brackets for the 40.
FJ40 Rear Bench Seat
- Thread starter needamod
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
It tumbles, it's just that CCOT apparently made special front brackets for the 40.
MOTOV8R
SILVER Star
Two bolts through the floor one with a sleeve to the fender.
Thanks Much! The sleeved bolt to fender is your idea?
Understand, made more sense after I unpacked mine. So looks like more holes with non-CCOT set-up. That said, looks like theirs is a one floor bolt per side deal. Rather use supplied HW for a more secure mount... Thoughts?
Stumpalama
Forum Junkie
Can you take a picture of the CCOT bracket?
MOTOV8R
SILVER Star
Yes. I wanted to make it stable side to side. If the ccot bracket is one bolt it seems like it may not be enough. I would have to see one or the drawing.
That would depend on how you install the seat belts and if you install 2 or 3 sets of belts. I have 3 harnesses and it no longer "tumbles".
x2. Thx
Bumping an old thread to see if there are any current finds with shoulder belts anyone has been using? Got another little human on the way and would just feel better have a bench with shoulder belts on it.
I have custom made 3-person bench seat and made attachments on my roll cage for 3-point harness I use on the streets and 4-point harness off-road.
Last edited:
I fit an FJ80 third row into mine. Not for the faint of heart.
Couldn't you just use some generic 3 point belts for the fold and tumble seat cool cruisers sells?
What do they attach to? I want minimal holes going into my floor. Especially an aluminum tub...
What if you used something like a metal tech cage and attached the upper mount to the 3rd hoop of the roll cage?
Stumpalama
Forum Junkie
I used aluminum cargo track to mount my seat...
Here is an album:
https://photos.app.goo.gl/iCWgsCvKP3bAwsTt2
Pay close attention to where your mounting bolts will go through the floor... You may have to drill new holes in the track to ensure an obstruction free fit.
Here is an album:
https://photos.app.goo.gl/iCWgsCvKP3bAwsTt2
Pay close attention to where your mounting bolts will go through the floor... You may have to drill new holes in the track to ensure an obstruction free fit.
I've been using front 3-of seat belts from a mini truck for the last 24 years. It's not hard to tie them into a family cage.
I installed some seats from a 2007 Scion Tc into the back of my 40 this week. If I have a chance to work on it today I’ll post a picture of how it looks.
They fold flat and I mounted them to the base plate of the metal tech family cage. Provides a nice area underneath where I’ll build some storage sliders to hide tools.
They fold flat and I mounted them to the base plate of the metal tech family cage. Provides a nice area underneath where I’ll build some storage sliders to hide tools.
Awesome !
Interested to see your design.
