Ben I’m glad you completed the paper and got it submitted. And I understand you are a very busy man. Will this project be looked into, or is it getting removed from the list?Sorry to bug you about it, but I need to get my plans made for this project one way or another.
Builds Benjamin’s 3D Prints Build (37 Viewers)
- Thread starter BenCC
- Start date
-
- Tags
- build build thread
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
When is this going for sale ?
I might have missed it, sorry if I did, but is there some sort of subwoofer storage option that replaces the subwoofer cavity?
No worries and thanks for the response. That may just be worth waiting for.
Oh, that sounds useful. If it's modular, I suppose it has some standard-sized spots where we can choose what we put in there? I know there's not much space back there, but I'd love to mount a small inverter back there or maybe even have a small 'secret' storage space to safely store things.
Saving for later. Very nice work!
BenCC
Supporting Vendor
- Thread starter
- #2,510
This gentleman made a perfect ashtray replacement unit. It looks like a painted fiber glass mod based on the factory ashtray assembly.
forum.ih8mud.com
Any location for a larger subwoofer?
Lovely! What is that magical creature where the stock ashtray panel lives? Can you share the design with @BenCC ? It looks like a fiber glass mod of the original ashtray assembly. @m0nkie please sell the product to our fellow 100 or 470 owners
forum.ih8mud.com
BenCC
Supporting Vendor
- Thread starter
- #2,511
Make 34 Hazard/DiffLock Switches Swap Kit
This make mounts the Hazard/Difflock switches to the passenger side.
Overview:
Why did I want to swap the switches?
Installation Instruction:
A. Preparation
A-1. Pry open the console with a plastic pry tool.
A-2. Remove the factory Hazard/DiffLock switch assembly.
B. Replace the short factory cable.
B-1. Remove the main circuit board.
B-2. Remove the main circuit board.
B-3. Replace the short cable with the provided long one.
B-4. Put the main circuit board back.
B-5. Put the cover back.
C. Install the swap kit.
C-1. This is the removed switch assembly from A-2.
C-2. Disassemble the unit.
C-3. Insert the white slides in the guides.
C-4. Insert the switch covers. Press until you hear a click.
C-5. Insert the partially assembled unit in the passenger side console.
C-6. Put the switch circuit board on.
C-7. Press the switch covers until you hear clicks.
Purchase
$100 plus shipping
Includes
(a) The 3d printed switch mount.
(b) Fasteners.
(c) The longer cable.
This make mounts the Hazard/Difflock switches to the passenger side.
Overview:
Why did I want to swap the switches?
Installation Instruction:
A. Preparation
A-1. Pry open the console with a plastic pry tool.
A-2. Remove the factory Hazard/DiffLock switch assembly.
B. Replace the short factory cable.
B-1. Remove the main circuit board.
B-2. Remove the main circuit board.
B-3. Replace the short cable with the provided long one.
B-4. Put the main circuit board back.
B-5. Put the cover back.
C. Install the swap kit.
C-1. This is the removed switch assembly from A-2.
C-2. Disassemble the unit.
C-3. Insert the white slides in the guides.
C-4. Insert the switch covers. Press until you hear a click.
C-5. Insert the partially assembled unit in the passenger side console.
C-6. Put the switch circuit board on.
C-7. Press the switch covers until you hear clicks.
Purchase
$100 plus shipping
Includes
(a) The 3d printed switch mount.
(b) Fasteners.
(c) The longer cable.
Last edited:
That Make 34 is super trick.
I already have the Make 2 installed so probably won't do it but given the frequency of use between phone and those two switches, this is a brilliant idea.
I already have the Make 2 installed so probably won't do it but given the frequency of use between phone and those two switches, this is a brilliant idea.
Hello,
Could you consider making an insert that goes where the factory diff lock switch sits - which will then accept a factory Toyota switch? 2 switches would be good even, but dont think that square shape is large enough...
Could you consider making an insert that goes where the factory diff lock switch sits - which will then accept a factory Toyota switch? 2 switches would be good even, but dont think that square shape is large enough...
Pretty ironic timing for your post. I chatted with Ben about this yesterday. He is going to try to rig something up to accept two OEM style switches for that hole. I’m sure he’ll chime in.
Freaky
Yeah well the 100's in Australia didnt all come out with factory diff locks so there's a blank square instead
- Joined
- Jan 4, 2014
- Threads
- 94
- Messages
- 3,045
- Location
- Little Rock, Arkansas
- Website
- www.facebook.com
Anybody know if this piece has it's own pn? I've tried looking but I can't seem to find anything. Looks like it can only come as an assembly with the whole lower dash. I've cut mine up to accept several different switches and would like to start from a fresh slate.
Try 5554860040C0
Hey Ben, I had an idea.
What about making a panel that replaces the one with the mirror adjuster? Have a switch slot there rather than a solid panel. Lots of people are cutting it open and putting a switch there anyway. Post 2514 is a great example.
What about making a panel that replaces the one with the mirror adjuster? Have a switch slot there rather than a solid panel. Lots of people are cutting it open and putting a switch there anyway. Post 2514 is a great example.
totally awesome work!!! I am going to be sending a lot of money your way!
