Builds Benjamin’s 3D Prints Build (20 Viewers)

[gregnash]

My Yeti tipped over this morning when I turned.

Well you gotta tell squatch that he/she/it needs to stand up straight and not lean into corners! This is a Land Cruiser, not a Ferrari the only time you need to lean into something is when you get a bit of three-wheel motion on the trail and need to bring that tire back down to earth!

 

[trdcorolla]

Yes.

I ended up pulling a set of these out of the tool box to get it out:

Amazon product ASIN B0000CCXVZAmazon product ASIN B000QW6K8I
(I don't remember which size or if it was the "main" kit or "accessory add-on pack")

Thanks, I bought and tried a pair of Vamplires and it didn't work. Gonna try a cold chisel to try to turn it. If that doesn't work I may try this.

 

[BenCC]

Updating on the center storage box insert:

All corners and draft angles are adjusted to better match the factory dimensions. I don't want the insert to wander around in there.

A prototype was printed in PETG (won't warp under summer heat) and sent to @NLXTACY for product evaluation. I like his high standard on his own products.

Design can be revised based on individual need.

 

[gregnash]

That's pretty nifty looking... s*** this means that I need to dedicate a card to Ben's s*** now as well... Already got one that I am working on for Jason's stuff. **** man, Imma be broke forever... But at least I will have a SICK RIG!!!

 

[Manhattan]

Finally! I'll have a center console with a properly configured and located Chapstick holster!

 

[BenCC]

Finally! I'll have a center console with a properly configured and located Chapstick holster!

View attachment 2365110

lol nice photoshop skill!

 

[gregnash]

Finally! I'll have a center console with a properly configured and located Chapstick holster!

View attachment 2365110

Now if we could just keep it cool in there so the chapstick wouldn't melt.

 

[Eyedaho]

Now if we could just keep it cool in there so the chapstick wouldn't melt.

Stand by for Ben's Dometic colab. Center console insert with refrigerated chapstick compartment.

 

[Dparo]

Make 2 V3: Magnetic Mic Mount

1. Overview of the Final Product
View attachment 2353216
View attachment 2353214

2 Description

M2V3 mounts a Magnetic Mic which is designed to securely hold the radio microphone in place. Similarly to M2V2, M2V2 has a backing bracket to increase the structural rigidity. All fasteners are stainless steel and included. Magnetic Mic is not included.

The magnet is ridiculously strong. It definitely can hold something heavier than a radio microphone.

3 Purchase

$69 + Shipping (USPS Priority). PM for direct Paypal payment.

Apologies if this has been asked but is there an option for the newer style dash?

 

[BenCC]

Apologies if this has been asked but is there an option for the newer style dash?

You mean the later years LC or LX?

 

[BenCC]

If you’re interested in chasing up new connectors for the PCB connection lead it is a Molex CONN RCPT HOUSING 2MM 7POS SGL part number 51004-0700
Data sheet https://www.onlinecomponents.com/datasheet/510040700-11869134/
The pins are Molex CONN SOCKET 24-30AWG CRIMP TIN Part No 0500118000

I got the molex connectors and pins.
They are so tiny! My crimper is just too large. Any recommendation? Thanks.

 

[LndXrsr]

Maybe a tiny pair of mosquito forceps or similar?

 

[saucebox]

I got the molex connectors and pins.
They are so tiny! My crimper is just too large. Any recommendation? Thanks.

View attachment 2366115

Ballenger Motorsports might stock something. They're super helpful and know what they're talking about.

Ballenger Motorsports - High Performance Electronics

www.bmotorsports.com

 

[jay3253]

Okay, maybe someone has suggested this but while you are making an insert for the center console how about making a stronger latch for the same center console. Mine broke and they don't sell a replacement had to find one salvage and put a whole new lid on it.

 

[outdoorsman]

That is a great suggestion on the center console lid latch. I have a broken latch on 02 LC .

 

[Adam OJ]

Maybe another version of Make 2 would be to integrate a Nite Ize magnetic ball. Would be similar to the Magnetic Mic. I already have the investment in the Nite iZe (3 mics). Same idea, lower price point.

This is my current set up. that plastic insert flexes like crazy. it is holding, but it just a matter of time before it breaks.

 

[OB-1]

That is a great suggestion on the center console lid latch. I have a broken latch on 02 LC .

Same for me, but on an 01 LX470.

 

[saucebox]

Same for me, but on an 01 LX470.

Center Console Top Lid Latch - Simple Fix with OEM Part

I’ll start with not taking credit for this idea, just completing the write up with pictures. User erikvogel I think first mentioned this fix. IMO, this procedure is much easier and has much less risk than the procedure that requires completely separating the leather portion of the lid from the...

forum.ih8mud.com

Let's not distract from the cupholders!

 

[BenCC]

Center Console Top Lid Latch - Simple Fix with OEM Part

I’ll start with not taking credit for this idea, just completing the write up with pictures. User erikvogel I think first mentioned this fix. IMO, this procedure is much easier and has much less risk than the procedure that requires completely separating the leather portion of the lid from the...

forum.ih8mud.com

Let's not distract from the cupholders!

I just hit like and priority is still cupholder lol

 

[Mangocruiser]

I just hit like and priority is still cupholder lol

And the ashtray panel replacement? please !