Found myself looking into this and thought I'd post up a one-stop index of significant threads, in no particular order. Most are 80s, some are not but include good content. If you find more, post a note and I'll add them to the list...
The significant 80 Series shelf fabbers I'm aware of are...
Delta Vehicle Systems (of course)
Rago Fabrication
KAON 4x4
Victory 4x4
(No 80 shelf as of June 2022)
That said, there was a guy at some point, making good-looking ceiling racks but who was (at the time) getting a lot of flack over delivery issues; who was that? Anyone...?
The significant 80 Series shelf fabbers I'm aware of are...
Delta Vehicle Systems (of course)
Delta Vehicle Systems
Off-road and 4x4 performance equipment designed and manufactured in Boise, Idaho. Bumpers, lift kits, storage solutions and more premier overland equipment for your off-road vehicle.
www.deltavs.com
Rago Fabrication
Toyota & Lexus Molle Panels & Off-Road Accessories
Rago Fabrication offers quality off-road products & accessories including Molle Panels, Light Mounts, Electrical Upgrades, SUV Storage Solutions, Racks & much more for 4Runner, Tacoma, Tundra and other models! Proudly made in the USA.
www.ragofabrication.com
KAON 4x4
4x4 Camping & Car Accessories Australia | Custom Off Road Accessories
Shop for the best selection of online 4x4 accessories at Kaon. Find top-quality 4x4 aftermarket accessories for your vehicle. Discover a wide range of high-quality Australian 4x4 accessories for your vehicle at competitive prices.
www.kaon.com.au
Victory 4x4
That said, there was a guy at some point, making good-looking ceiling racks but who was (at the time) getting a lot of flack over delivery issues; who was that? Anyone...?
Delta Vehicle Systems ceiling storage options
Howdy all! Hope the warm weather is getting everybody out into the wild enjoying your rigs. We have been fielding a lot of questions from folks on the differences between our Ceiling Storage Racks (or CSR) and our Ceiling Storage Brackets (or CSB). This thread will go through the explanation of...
forum.ih8mud.com
Delta Vehicle Systems Ceiling Storage Rack Installation
forum.ih8mud.com
Attic racks made cheap and easy - 80 series
First off the idea was not originally mine. I did come up with this cheap and easy attachment.:grinpimp: Tools required - A screwdriver (like the one in your OEM tool kit;)) Material required - 2'x4' display grid < ebay source link 4 - Hose clamps I used Norma 25-40mm stainless steel clamps <...
forum.ih8mud.com
80 Series Ceiling Storage Bracket (CSB)
Howdy all. Posted a thread over in the 80 Series Tech forum detailing how I made a set of ceiling brackets for the back of my FJ80. I had found a stainless steel kitchen shelf that was about 4 feet long (47-3/4 long, 18 deep, and 1-1/4 high to be exact) and would fit perfectly between the rear...
forum.ih8mud.com
Quick interior overhead rack project
A little project to welcome my weekend. Met up with some other Cruiser owners this week and saw a couple cool gizmos I thought I'd try. Thanks to @Cruzilla for this one! Yesterday, I stopped by the scrap yard and lo and behold, there was the exact style/size of stainless kitchen shelving...
forum.ih8mud.com
Maximized Attic Rack Usage
I've pulled the 18"x48" chrome bread rack shelf that acts as my attic rack spanning the 3rd row grab handle mounts out of the truck for some headliner wiring work. I am putting it back in this weekend but feel I'm severely under-utilizing it's space and functionality. I want to take full...
forum.ih8mud.com
Attic Rack
After reading this thread: https://forum.ih8mud.com/az-copper-state-cruisers/623800-mad-attic-rack.html I knew I had to make one. I picked up a 2x6ft. piece of chrome "Gridwall" at the local thrift for $15. Cut it dowm to 2x4', and saved the rest for later. Sitting on top of the local...
forum.ih8mud.com
MAD Attic Rack
After seeing a few attic racks in the white 80 of CSC members, I decided to have jjgarci1 build an attic rack for my cruiser. It works great. The rack system consists of 2 mounting brackets, chrome gridwall and mounting hardware. Installation is super easy: Remove 3rd row seat grab handles...
forum.ih8mud.com
Attic Rack Gear!
So I have seen a ton of people make/buy their attic racks but I haven't seen what people put up there. If they did post a pic their wasn't a list so I figured make a post, hopefully this one goes better then tail gate storage gear thread, of what everyone is putting up there. I'll start..I have...
forum.ih8mud.com
Rear ceiling rack inquiry
Ive seen several CSCrs with a rack mounted up above the rear storage area (LCPhil, Rudster, AZTony(?) come to mind) that holds all thier stuff and gets it up off the floor. Even saw a papertowel rack on one of them :D The Question: Where and what did you use for the rack? I went to Home Depot...
forum.ih8mud.com
Attic Rack
Throwing this out to the Dixieland Brain Trust: I contacted Landcruiser Phil about purchasing one of his attic racks for my 100 and he told me they stopped selling them because the shipping was a killer. See 100 Series Attic Racks available for the holiday *limited supply for pictures and...
forum.ih8mud.com
Neat roof (ceiling) storage
It's not a Toyota but thought some might like the idea... In preparation for my storage cabinets and new roof insulation, I took the headliner out. This allowed me to use these nifty little magnet hooks (strong enough to each hold 20lbs) onto the roof/pillars to partly support these cargo...
forum.ih8mud.com
Attic rack for 80 series
Attic rack for 80 series/LX450 - $66 Come with mounting hardware. This is the exact rack that you will be getting.
forum.ih8mud.com
Attic Racks/Storage Shelf Talk
Hello Everyone, Last year I saw some pretty nifty designs for attic racks and storage at 100's in the Hills, and I would like to get cracking on building one this year since labrack seems to not be making them at this time (and they were like 350 bucks....ouch). Any who, I have done some...
forum.ih8mud.com
$20 attic rack build
this weekend i set out to build an attic rack that would- 1- still allow room for my 2 large dogs to fit in the back w/ head space 2- not block the ceiling vents for them 3- store small items, shoes, bike pump, towels, etc. (nothing too heavy) 4- use items i already had I ended up using a wire...
forum.ih8mud.com
LandCruiser Products Attic Rack
Was lucky enough to get one of @LandCruiserPhil 's first 100 series attic racks. Showed up quick, well packed. Phil included all the hardware needed, as well as a suggestion for paint to match my tan interior. I wound up using black though, to match my drawer system. Rack is well made, and is...
forum.ih8mud.com
100 Series Attic Shelf Bracket Availability
I have some of the @Delta VS DIY brackets in my 80 series but really could use some in my wife's kid-hauling, grocery-getting 2002 LX470. I know that the handles can vary from year to year. Can anyone point me in the right direction? As Spring gets closer and closer we are starting to plan our...
forum.ih8mud.com
100 Series Attic Racks available for the holiday *limited supply
We are making a small run of 2003-2207 of Attic Racks for the holidays:santa: Small because we will be using materials from current stock and want to test the water before it becomes a stocking item. On this run Attic Racks will be unfinished and depending on feedback may remain that way...
forum.ih8mud.com
Kaon Roof Shelf...
Been trying to come up with a storage/mounting location inside the truck for my "Tire Table" and it finally hit me a couple days ago that I could mount it underneath the shelf. I tried bungees and straps and nothing held secure. Then I found these "Threaded Star Knobs" and decided to see if...
forum.ih8mud.com
Victory 4x4 rear shelf
I was looking to get a Kaon cargo shelf, but saw that Victory 4x4 offers one too, made in the US, and their owner is a 'mud member, so I picked one up. It arrived quickly and was well packaged, with several expanding foam packs so everything arrived safe and sound. I had previously replaced my...
forum.ih8mud.com
Last edited: