jaymar

Regarding the 90105-06221 valve cover bolts: Whenever I have a "this doesn't seem correct" correlation between what the technical documentation and my "hand experience" (turning the wrench)-- especially with hardware, I always refer to...

These are from when I installed the Goose Gear plate in my GX, not exactly like the 200 but you get the idea. I also put down a sound barrier prior to the plate, it helps to keep the noise down and controls temps better since the carpet barrier...

I'll be making something similar, hopefully this weekend and can take some photos.

Well, if you ever have the drawers out... :)

Sorry. I don’t.

Mine came with ARB lights wired to alternate with stock turn signals.

Ah, I see it now, by the second row. Any photos of the base plate going in, before the drawers are in place?

Yes. That is the required base. I had carpet removed and dynamat installed for noise reduction under the plate. The plate uses existing threaded body holes.

Free to rent from Autozone or equivalent.

Could ongoing misfire be related to this issue? Seems too coincidental...

Had no idea this existed, thanks!

For these symptoms, anyway

Cheap, quick and definiative test.

HG

Not since replacing every one I could reach a few years back. I'll take a look at the ones I can see, thanks for the tip!

Did you fiddle with any vacuum hoses?

2 cents is HG, this is simple one to use

Maybe some of the wiser posters will have some alternative ideas but...it sounds like it is the headgasket. If you are sure the odor is coming from the radiator then you won't need to rent the hydrocarbon test for this diagnosis. Are you...

Is there a GG plate underneath the drawers?

I like the quality and fit. The only down side and it’s specific to me, is when I go to my cabin and have to bring a trash can to the transfer station, it won’t fit standing up. So the mini van gets trash duty. I also was driven nuts by the...

I have it. I will upload some photos tomorrow. The floor plate fits perfectly. It is confirmed wood, coated on one side. Uses oem bolt points, so no drilling. I added the full dual drawer system with a 1/3 2/3 40” deep drawers. Provides cubby...

I ran one in my GX, good stuff but they are getting more and more expensive (like everything). It is Birch covered in a Line-X type material. There are some cheaper alternatives from a few other vendors but they aren't coming to mind at the...

Have a misfire on #1 cylinder, and smell gas when the radiator cap comes off. Any thoughts on this?

Try this...