Is a desmog my only option if my air pump grinds to a halt? I’d like to keep things original as possible and would prefer to have rebuilt. Toyota dealer said no longer available. Options?
Thanks.
Thanks.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
My state does not have emissions requirements so the smog equipment is not necessarily required. I want to try to keep it original but in the end, I’ll do what I have to to get the truck operable again. Any sources on pump rebuilds? That would probably be the best and easiest option with the least downtime.You can get a rebuilt pump other places. If you’ve got to smog test it - then you need a new pump. But there’s nothing wrong with installing an idler pulley there instead in the mean time. A few places sell a pulley and bracket to replace the pump.
I went with BZ Rebuilders in Canoga Park, CA. Call them and let them know what you want, then send them a core and it comes back looking immaculate. The communication was a little weird - i think they rebuild a fair deal of old smog pumps and it's no big deal for them, as opposed to me who had a bunch of questions because it seemed rare to find a tiny shop far away that specialized in this.My state does not have emissions requirements so the smog equipment is not necessarily required. I want to try to keep it original but in the end, I’ll do what I have to to get the truck operable again. Any sources on pump rebuilds? That would probably be the best and easiest option with the least downtime.
I appreciate all of the comments. I decide to send my pump off to be rebuilt by Cardone, I believe, thru Rock Auto. Removal of the pump wasn't terrible, but I finally gave up and made a small cut on the short hose connected to the back of the pump so I could remove it. The hose was petrified. I'm hopeful I can still reuse the hose, but in case, does anyone know of any options? Going to call Toyota on Monday, but afraid of what they're going to say.
@85FJ in SC Back again to say Spike Strip is right. BZ is the way to go. I bought a parts store Cardone that was not the right pump - hoses had a tough time fitting. Then it blew up. Photos below of the blown up Cardone and of the one I had BZ Rebuilders do. I like only buying stuff once if I can help it.Don't use Cardone. Do a search here and you'll see why.
Since you have to ship it out anyway , BZ Rebuilders is cheaper and better, and they do the rebuilds for SOR:
![]()
Smog Pump Rebuilder FYI
Just for Cruiser Peeps info, this Alternator, Starter, Smog Pump rebuilder in Canoga Park does the rebuilds for SOR. They accept mailed in units. B-Z Rebuilders | Auto Parts Rebuilt I've got a smog pump there now, being rebuilt, and will post some pix of the business and finished product...forum.ih8mud.com
That's my pump, and I had them do a couple as back ups for other cruisers.
As a side note, that pictured pump was a replacement for a pump I had done by another recommended rebuilder in Camarillo, CA. That pump NEVER put out much air and caused me all kinds of grief until I finally found these guys and that put made all the difference in the world for smog test results.
View attachment 2896060
View attachment 2896062
Is a desmog my only option if my air pump grinds to a halt? I’d like to keep things original as possible and would prefer to have rebuilt. Toyota dealer said no longer available. Options?
Thanks.
My pump squeaked on and off for 500 miles and then settled down. Then it squeaked again from 800-1000 miles. I called them and they said "everything's fine, don't worry." It's more of a "chirp" by the way.Update on my air pump situation. Two-week turn around not bad. Installed the pump yesterday and finished putting everything together today. One concern, a note included in the return box said it was normal for the new pump to squeak for some 500 miles. That's going to be annoying. Hopefully it shakes out sooner. As for the small ABV hose coming off the back. I tried all of the major parts stores except Napa with not luck. Tried a heater hose from Lowes but it would not install without a major kink. I did find a local company that custom makes engine hoses same day when you bring one in. Not sure of the price yet but the duct tape I used to reinstall the original (I had to cut to remove) will not last forever.
Seems like the TLC Performance link is busted. I clicked on it in Jim C's signature link, too, with the same result. Anyone else having the same result?Since you don’t have emissions testing in SC, I’d still get an idler pulley from Jim C, and put your rebuilt pump on the shelf for safe keeping.
![]()
Air Pump Idler pulley, 81-87 2F engine
This 2F Air Pump delete replacement idler pulley mounts in the location of the stock AP, to tension the critical fan belt, uses stock hardware & belt.tlcperformance.com
Bolts right up in the same spot, uses the same belt. No hoses. This breathing room can come in really handy down the road when you need to do other work in that cluttered driver’s side zone.
I’d do it if I could, but since I can’t, I can at least encourage others…
I'll take my tech issues elsewhere ...Working for me