- Thread starter
- #121
Changed out the Front and Rear Transfer Case Seals.
Thanks for the parts Kurt @cruiseroutfit
Probably the easiest job I've done on this vehicle besides changing the shocks,
although the Nuts were Staked Knee Deep and bent 2 screwdrivers un-steaking the nuts.
It helped that I had a good seal puller. So hopefully no more leaks in the driveway.
The front seal really wasn't in that bad of shape. A lot of gunk in that area but it wasn't the front
seal upon further review. It appears the UFO object at 10' o'clock or possibly the High/Low Shifter at 12 o'clock.
Lots of buildup on both.
Thanks for the parts Kurt @cruiseroutfit
Probably the easiest job I've done on this vehicle besides changing the shocks,
although the Nuts were Staked Knee Deep and bent 2 screwdrivers un-steaking the nuts.
It helped that I had a good seal puller. So hopefully no more leaks in the driveway.
The front seal really wasn't in that bad of shape. A lot of gunk in that area but it wasn't the front
seal upon further review. It appears the UFO object at 10' o'clock or possibly the High/Low Shifter at 12 o'clock.
Lots of buildup on both.