matt.mcinnes
2F-ETI
- Thread starter
- #241




44mm Wastegate
http://ads.auctionads.com/pagead/li...STRK:MEWN:IT&viewitem=&item=130151579947&rd=1
Top class service from here

Last edited:
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Bling it is! That looks great , but I gotta ask: Why the expense of Jet Hot vs same color powder coat? I just got a quote from Jet Hot to do a set of Downy headers $220! How much was the cover?
Damn, that looks nice. Are you gonna play around with other coatings at all, as in on the piston skirts or valve faces? At the power level you are shooting for you might actually be able to pick up a little power.
Why the 2F rocker arm cover instead of the 3FE?
Damn, that looks nice. Are you gonna play around with other coatings at all, as in on the piston skirts or valve faces? At the power level you are shooting for you might actually be able to pick up a little power.
Piston will be ceramic coated on the top and Teflon coated on the side.
Hey looks great! I love that your turning an F series engine into a truly built motor! Have you made your turbo manifold yet (well i saw that your using the original 3fe manifolds but what about the next pipes leading to your turbo? Keep us updated, especially with the pics!!!
Evan
Piston will be ceramic coated on the top and Teflon coated on the side.
wow!
if this engine doesn't end up in a magazine somewhere, something is very wrong....
you need to get this in Trails if nothing else!
Been published is one thing but to be copied was an honor![]()
Speaking of piston when I dropped the head back in with the new bling rocker cover to the engine builder these had just arrived![]()
Teflon coated skirt is black and they also already have there Ceramic coating on top. Also gas vented to suit the turbo, which expands the top ring on the power stroke to give a better seal still.
![]()
Niiiiice man, that is friggen awesome. So, these are a custom made set right? How tight can you get the quench with these pistons?
BTW, it might be worthwhile to put a reflective coating on the face of the exhaust valve. It keeps a lot of heat out of the valve and can help prevent detonation caused by the sharp, hot edge of the valve in the chamber. With your turbo it might be wise.