1973 Toyota FJ40 Build.....Long Road Ahead (11 Viewers)

[Sully73FJ40]

where did you source those side mirrors?

...

By the way, we going fishing Sunday?

 

[Sully73FJ40]

Not to get off track but does anyone know where I can source the 4 male socket that is for the winch 8274 controller? I bought two today from a trailer shop today but they do not line up nor fit in the solenoid cover hole. If anyone might know a part number or a source for an exact replica of that socket I would really appreciate it as I want to put new ones in on the two 8274s.

The pic below shows the socket I'm referring to in the middle of the solenoid cover.

 

[SouthBostonFJ40]

Not to get off track but does anyone know where I can source the 4 male socket that is for the winch 8274 controller? I bought two today from a trailer shop today but they do not line up nor fit in the solenoid cover hole. If anyone might know a part number or a source for an exact replica of that socket I would really appreciate it as I want to put new ones in on the two 8274s.

The pic below shows the socket I'm referring to in the middle of the solenoid cover.

http://warnserviceparts.com/

 

[Sully73FJ40]

Wow $113 minimum is pretty steep. O figured this could be sourced at s better price.

 

[Sully73FJ40]

Thanks by the way! Appreciate it

 

[SouthBostonFJ40]

Wow $113 minimum is pretty steep. O figured this could be sourced at s better price.

If you change out the plug to something cheaper, just buy the mating connector and put it on the remote cable.

 

[kling-on]

I have one on mine or you looking for new ??

Sent from outer space via my mind

 

[Sully73FJ40]

Thanks for the offer Joel, I'm actually wanting to replace with new.

 

[Littl42]

I like the air box you have in there, what filter is inside?

 

[Sully73FJ40]

I like the air box you have in there, what filter is inside?

Jm going to pick up the filter this morning. Ikl post up soon

 

[crotalusatrox]

By the way, we going fishing Sunday?

I might be able to go,,, I will call you this morning

....

 

[Copenhagen1]

Not to get off track but does anyone know where I can source the 4 male socket that is for the winch 8274 controller? I bought two today from a trailer shop today but they do not line up nor fit in the solenoid cover hole. If anyone might know a part number or a source for an exact replica of that socket I would really appreciate it as I want to put new ones in on the two 8274s.

The pic below shows the socket I'm referring to in the middle of the solenoid cover.

I have been following your build. Great job!

This is what I did on mine. One pic shows the package it came in with the part number. The other pic shows the new one in the new awlteq cover and the old one next to it for comparison.
Exact match except for company logo on the new one.








The part # for the end that mounts in the cover is 48305. The part # for the remote would be 48325. The part # for a matched set is 48295. The manufacturer is named Hopkins and their parts are widely available. Good luck.

 

[Sully73FJ40]

I have been following your build. Great job!

This is what I did on mine. One pic shows the package it came in with the part number. The other pic shows the new one in the new awlteq cover and the old one next to it for comparison.
Exact match except for company logo on the new one.

The part # for the end that mounts in the cover is 48305. The part # for the remote would be 48325. The part # for a matched set is 48295. The manufacturer is named Hopkins and their parts are widely available. Good luck.

Cope,

This is exactly what I was looking for! I knew someone on here would document that socket. I do have a question for you. Did you have to attach a plug to your controller wire? If I have two good controllers I won't need the part for the controller will I?

 

[crotalusatrox]

Cope,

This is exactly what I was looking for! I knew someone on here would document that socket. I do have a question for you. Did you have to attach a plug to your controller wire? If I have two good controllers I won't need the part for the controller will I?

me too!

 

[Sully73FJ40]

Well after spending most the day out in the sun which is radiating currently at 92 degrees in San Antonio, I'm sitting on the porch enjoying this nice cold Harp lager.

 

[jmdaniel]

I'm about three minutes from jumping into our pool, with a Sierra Nevada Torpedo in my hand!

 

[Copenhagen1]

Cope,

This is exactly what I was looking for! I knew someone on here would document that socket. I do have a question for you. Did you have to attach a plug to your controller wire? If I have two good controllers I won't need the part for the controller will I?

As far as I know, the male end that is on my Warn remote IS the original and yes it works. But I could be wrong about it being original....YMMV. Worse case scenario, you have to order both and replace male and female but the side I replaced looks identical to what was in my original Warn cover. Here are some pics:

 

[kling-on]

Well after spending most the day out in the sun which is radiating currently at 92 degrees in San Antonio, I'm sitting on the porch enjoying this nice cold Harp lager.

I like my girly beer and BBQ

Sent from outer space via my mind

 

[Sully73FJ40]

As far as I know, the male end that is on my Warn remote IS the original and yes it works. But I could be wrong about it being original....YMMV. Worse case scenario, you have to order both and replace male and female but the side I replaced looks identical to what was in my original Warn cover. Here are some pics:

Thanks man! That's great to know and thank you for the pictures. I'm using the awlteq solenoid cover as well on both. What solenoids did you go with on yours? I went with the summit "Albright". However there aren't very many good photos of the wiring.

 

[nspctr1]

Nice, I just got back from a short 12 mile mountain bike ride, came home and the wife has lobster tails boiling on the stove with Labatt Beers chillin'....