wpns4l
Reactions
112

Latest activity Postings About Badges Post areas

    • wpns4l
      wpns4l replied to the thread Building my 93 FZJ80..
      It does not come with valves or spring or anything. I had those installed separately.
    • wpns4l
      wpns4l replied to the thread Building my 93 FZJ80..
      Brand new head with new valves ready to go. Going to order new studs and coolant pipe for it vs reusing my old stuff.
      • PXL_20220912_180205453.jpg
    • wpns4l
      wpns4l reacted to DirtyPepper's post in the thread Building my 93 FZJ80. with Like Like.
      I'm doing this soon also...picked up a second set out of another '97 so I'll ship those off so my rig isn't sitting at my buddies place for a week. Then I'll send the other out, wrap them up, and swap out in another 221k miles :D
    • wpns4l
      wpns4l replied to the thread Building my 93 FZJ80..
      Injectors cleaned and adjusted.
      • PXL_20220908_155544666~2.jpg
      • PXL_20220908_155526725.jpg
    • wpns4l
      wpns4l replied to the thread SOLD 1FZ Head.
      Hey guys, thanks but I actually ended up ordering new yesterday and got it today. I knew as soon as I ordered it too people would start replying lol.
    • wpns4l
      Looking for a 1FZ head in good condition for a rebuild. Not all warped, no cracks and preferably one that hasn't been decked before too. Don't need the cam shafts with it. I've inquired with a few people on the forums but trying to see...
    • wpns4l
      Looking for a good condition used engine harness from a 93/94 80 series with no broken connectors and no splices. Let me know.
    • wpns4l
      Sent you a PM
    • wpns4l
      wpns4l replied to the thread OEM valve cover gasket.
      The one I ordered from Toyota was black.
    • wpns4l
      Is this still available?
    • wpns4l
      wpns4l replied to the thread Building my 93 FZJ80..
      So I got bad news from the machine shop. He called me in and showed me how whoever did the last head job grinded the valves down to far and unevenly. I need all new valves. The valve guides where all dented and looks like someone used a...
    • wpns4l
      wpns4l replied to the thread Building my 93 FZJ80..
      Yea the parts I ordered from the US haven't even shipped yet. The FedEx tracking for the held up shipment makes it sound like it was missing an inventory sheet or something. I'm assuming they contacted the seller, I'll give it another day or so...
    • wpns4l
      wpns4l replied to the thread Building my 93 FZJ80..
      Head was dropped off today. They estimated about a week turn around so we shall see. Either way half my parts are held up at customs it seems so there is no rush.
    • wpns4l
      wpns4l replied to the thread Building my 93 FZJ80..
      I would buy a new harness but they don't make OBD1 harnesses anymore and finding a mint condition used one has been impossible so far. I'm going to look into a parts washer or like a cleaning tumbler for all the hardware. I'm coming up on days...
    • wpns4l
      wpns4l replied to the thread Rebuild time.
      I'm rebuilding mine right now with 288k. It's been easy going so far, just waiting on parts to get delivered so I can take it to head shop. My thread with pics and part #s
    • wpns4l
      I've had a soft line break and dump all my trans fluid on the highway. I honestly think I might have hit something on the road that bounced up and hit the line which was original and weak.
    • wpns4l
      wpns4l replied to the thread Building my 93 FZJ80..
      List of parts ordered. This is just the first round of parts ordering and is primarily for the engine. There are still some hoses and other things I need but I'm not in a hurry so I can order as I go. Most the parts were ordered from partsouq...
    • wpns4l
      wpns4l replied to the thread Building my 93 FZJ80..
      Today took the oil pans and timing cover off. The PO must have used a whole bottle of RTV per oil pan because both were ridiculous to get off. The internals on the block look fine to my untrained eye and everything looks pretty clean. Now that...
      • PXL_20220802_220454787.jpg
      • PXL_20220802_220505986.jpg
    • wpns4l
      I did it to my 92. Assuming you don't have to rebuild the new axle your only cost will be the axle itself. It's direct bolt in. Make sure you get the ebrake cable from the donor vehicle too.
    • wpns4l
      Now you need to do the next brake upgrade and replace your rear axle with a disc brake axle 👍🙂
    • wpns4l
      wpns4l replied to the thread Building my 93 FZJ80..
      That's pretty much where I am at right now. On my next days off the goal is to get the oil pans off and timing chain cover off. Then I gotta find a shop for head work, clean parts and start ordering gaskets and replacement parts.
    • wpns4l
      wpns4l replied to the thread Building my 93 FZJ80..
      So going further on the engine tear down I found a lot of cases where the PO used a bolt where there was originally a stud and used studs in a few places that originally had bolts. I would be lying if I said I've never done the same but the plan...
      • PXL_20220730_164154041.jpg
      • PXL_20220730_164126705.jpg
      • PXL_20220730_164137928.jpg
    • wpns4l
      wpns4l replied to the thread Building my 93 FZJ80..
      So like I mentioned above when I bought the truck and took it to get smogged it passed first time. Only issue was the guy told me my timing was at 0TDC. Stock is supposed to be 3BTDC. I am allowed +/- 3 in CA so I passed with it at 0. But I...
      • PXL_20220721_211114820.jpg
      • PXL_20220730_175515718.jpg
      • PXL_20220721_205018499.jpg
      • PXL_20220721_205027903.jpg
    • wpns4l
      Adding to the tons of build threads 👍 I bought this green 1993 FZJ80 a year ago for $4k out in Vegas. It has 288k miles, triple locked, was repainted and super dirty inside. Not sure how many owners its had. The PO said he had a shop do the head...
      • truck.jpg
    • wpns4l
      I'm in need of a crank holder if you got any in stock.
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Top Bottom