- Thread starter
- #201
ok I'm following this thread from someone who's having the same issue as me: Post in thread '96 fzj80 crank no start' 96 fzj80 crank no start - https://forum.ih8mud.com/threads/96-fzj80-crank-no-start.1289471/post-14533610
no CEL so that means the ECU is not ready. I'm going to buy a new fusible link with the block. it looks sketchy anyway so I might as well replace it.
I have a few more things I need to check:
- fuses
- wiring harness close to egr pipe
- fuel pump relay? the one close to rear driver side wheel
- fuel pressure to see if there's fuel going into the injectors?
- spray starting fluid into the throttle body?
no CEL so that means the ECU is not ready. I'm going to buy a new fusible link with the block. it looks sketchy anyway so I might as well replace it.
I have a few more things I need to check:
- fuses
- wiring harness close to egr pipe
- fuel pump relay? the one close to rear driver side wheel
- fuel pressure to see if there's fuel going into the injectors?
- spray starting fluid into the throttle body?