bwalker16527
1974 FJ40 SBC V8 350 TH400
Reassembled the sides and back. Might have the 40 fully assembled in a few weeks. It will never be done.....
What have you done to your Land Cruiser this week? (43 Viewers)
- Thread starter IH8MUD
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
GA Architect
SILVER Star
Wife and I went on a date last night..........took the 40! 
With all the restoration work on my rig, the ride quality is.....well, the
fell asleep in the passenger Procar Rally Seat on the way home. 
Oh, the 40 served as the DD this week.
With all the restoration work on my rig, the ride quality is.....well, the
fell asleep in the passenger Procar Rally Seat on the way home. Oh, the 40 served as the DD this week.
bwalker16527
1974 FJ40 SBC V8 350 TH400
It is amazing what you can do by yourself with a little enginuity.
sterling
SILVER Star
Installed 4 degree shims and hardware.po installed a 2.5 lift and with the 33.10.5 BFG AT's, the truck was all over the road.
100% ride improved with the shims installed
100% ride improved with the shims installed
blossett
SILVER Star
Vae Victus
Posting more than I know
Got my Rainman’s Brake Line kit hand delivered by the man himself!
And removed the broken bolt I created in my flywheel overtightening (misread specs)
And removed the broken bolt I created in my flywheel overtightening (misread specs)
Michael B
SILVER Star
I put a little over 300 miles on Sampson this weekend. I took a day trip to Chattanooga Tn on Saturday and today I just rode through the country side and took a few pictures.
- Joined
- Jan 11, 2014
- Threads
- 26
- Messages
- 579
- Location
- North Georgia
- Website
- marcstpierrephotography.com
Michael B
SILVER Star
Yeah....just shared it over on my new IG page for 89 and Older Cruisers
I got my battery box done and the fan mounted. If this thing runs cool enough with this set up, I'll tidy up the fan brackets. I can only hope. I mounted my MSD in the glove box. Started to wire everything and spent more money with Summit....uhg....I'm at the point where I'm getting hundred dollared to death. The good news is, its starting to look like an engine bay.
Love it!! I suffer from the same fate...
Drove it as usual, but with 40 year old stuff it needs help now and then. Clutch pedal suddenly started going almost to the floor to disengage. Adjusted and bled but no change. Replaced master, bled and adjusted, now works perfect. Then a few days later I came to a red light and the engine died, tried to restart but it would run for a couple seconds and die, then nothing at all. Not getting fuel. Swapped out the COR (keep a spare in the glove compartment), started right up and I went on my way. Yes it's a 3FE, COR = Circuit Opening Relay. I keep a spare EFI relay and COR relay with me always.
Wife and I went on a date last night..........took the 40!
With all the restoration work on my rig, the ride quality is.....well, the
Oh, the 40 served as the DD this week.
That's great, Rick!!
Not sure I fully understand the cigarette emoticon...
