What have you done to your Land Cruiser this week? (40 Viewers)

[Chungas Revenge]

Do you have a sealer to recommend?

I think it depends on what you are doing, IE what level. Tub re-hab etc etc? 3M has good seam sealer for gutters and panels. My flex seal was more of a preventative measure at this point. Down the road, if I were to do a full on re-hab, I'd use a product like the 3M seam sealer...

 

[tls3601]

Serious meats on those rims................

 

[txnight]

Serious meats on those rims................

Those do look terrific. What size are those new BFG's?

 

[tls3601]

@Racer65 nice pics of the twins!!

 

[Taha32]

Finally got around to making up the pto shaft for my FJ45. The winch gear is out of a 60 series so I cut the three piece shaft down to two.

Sent from my iPhone

 

[oestlarsen]

Working on donor floor still (good lord body work takes time), and got my cool cruiser corner patches in the mail...
Finally, had the local metal shop bend me a sill cap to OEM spec...

 

[Helipilot]

Finished building the body rotisserie for the body, mounted the body and started sanding. Photos to follow tomorrow.

 

[Racer65]

Saw a gull wing go up and down while cruising in town today

 

[Wes]

Saw a gull wing go up and down while cruising in town today

View attachment 1188443

I'm more impressed by the Cruiser.


Sent from my iPhone

 

[Beeale]

Are those platesame to tie the cage to the frame? Couldn't find those on metal tech page. ???

Big week for me... Picked up my Metaltech cage, Real Steel bows and frame from the powder coater.

Installed my 4+ sliders, very impressed with these. VERY HEAVY DUTY and an awesome vendor! (Metaltech is great also)

 

[Beeale]

What bulbs did you use?

Changed bearings and cleaned up my full floating axle. And rebuilt my instrument cluster. LED bulbs and rebuilt odometer. I love long holiday weekends. What to do tomorrow?View attachment 1184688View attachment 1184690

 

[Beeale]

New all wheel drive tesla SUV. Probably wanted to go wheelin with you!!!

Saw a gull wing go up and down while cruising in town today

View attachment 1188443

 

[Bowling4$]

What bulbs did you use?

Here's is what I ordered. The green for the turn signals are way too bright. All purchased from superbrightleds.com
4 wled-whp5: cool white
2 wled-ghp5: green
1 wled-bhp5: blue

 

[new45]

I Had a rainy day and decided to make a project that I started thinking about a while ago. I have never liked the idea of separate battery box's but I dont want to modify the electrical system in my troop carrier so I think this is a good option.

70AH AGM Deep Cycle Battery, in Fully sealed hard case. 2 Cigg plugs, 2 USB power plugs and Anderson plug. A battery isolator, cuts power to everything.

On the side of the battery are a variety of cables that plug into the Anderson, one with a cigg end, and another with jumper ends for charging the battery and an Anderson - Anderson extender.

I managed to put it all together for a little over $250 AUS.

 

[Gus]

Began repairing/cleaning up some old wiring modifications done on the BJ42 only to discover that my rig is actually a 83 FJ40 converted to a 83 "BJ42", they did do a good job of it at least.

 

[txnight]

Warmed up the garage enough for a little polish and paint. For reference this color is Rustoleum Enamel Gloss Smoke Gray. I'm pleased with the color.

 

[Irish11]

I got tired of just listening to the wind, so I decided to install a stereo in my tuffy console. For the speakers I originally had them velcroed to the top of my confer box. I wanted to have access to the box without having the speakers in the way though. I thought I would try a different approach and mounted the pioneer TW150 boxes to the back of the seats using metal strap without drilling any holes. If I don't like them then no damage done. The only downside is they are rear facing so that might make them a lot harder to hear with the top off.

 

[Chungas Revenge]

Reinstalled the top..

 

[CreeperSleeper]

The 40's "new" engine is ready to come off the stand and be mated to the SM465! Personally, I think she looks pretty good. I can’t wait to see it surrounded by Smurf Blue.

Also for your listening enjoyment, here is a link to the engine running before it was sold by the previous owner:

 

[cruiserkreutz]

The 40's "new" engine is ready to come off the stand and be mated to the SM465! Personally, I think she looks pretty good. I can’t wait to see it surrounded by Smurf Blue.

Also for your listening enjoyment, here is a link to the engine running before it was sold by the previous owner:

Looks bad ass!

I can't play the video because I'm not on Facebook... Does it have a big cam in it (lopey idle)?