What have you done to your 100 Series this week? (64 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Yeah, very lucky and rare to find five. A friend had them sitting in his shop. he and I were just talking about our rigs and I told him I wanted to put RWs on mine. He said,"I have some if you want them". He actually had six, but the last one was pretty beat.
 
smakee said:
Yeah, very lucky and rare to find five. A friend had them sitting in his shop. he and I were just talking about our rigs and I told him I wanted to put RWs on mine. He said,"I have some if you want them". He actually had six, but the last one was pretty beat.
Click to expand...
I got lucky too. A while back I bought 4 from a guy on CL and looked for a 5th for a few months. Then a few weeks ago I went into Valdosta Toyota to order a replacement AC condensor seal and noticed they had one new Rock Warrior on display in the showroom. I made them a cash offer and walked out with it!
 
ga12r1 said:
I got lucky too. A while back I bought 4 from a guy on CL and looked for a 5th for a few months. Then a few weeks ago I went into Valdosta Toyota to order a replacement AC condensor seal and noticed they had one new Rock Warrior on display in the showroom. I made them a cash offer and walked out with it!
Click to expand...
How much did you o
 
They wanted $300 got it for $200.
 
Anyone ever seen a Hundy with these wheels? The (stealth6)

IMG_2626.PNG
 
Nathan Neumeyer said:
Anyone ever seen a Hundy with these wheels? The (stealth6)

View attachment 1461046
Click to expand...
There is a member on this forum here with these wheels, they look great. I wish they made them in an 18". That and I can't bring myself to throw away perfectly good wheels. His truck is either blue vapor, or thundercloud.
If I had seen these when I bought mine, they would be on my truck.
 
cmck said:
Memorial Day trail riding is coming. So.....
  • Put the front and mid skids back on
  • Painted the control arm skids tough dog red (install needed)
  • Changed the setting on the SPC uca's to D from E
  • Switched the cv clamps to the pfrans clamps
Click to expand...
Checked the cv's for grease after 100 miles and they were bone dry :beer:
 
Removed the rear resonator and replaced it with tubing. The resonator was heavy at 12.5 lbs. Used existing factory exhaust rubber mounts and fabbed a hanger from the mount to the pipe x2 for a solid feel. Picked up a cleaner look with more clearance. Was hoping for a little more tone but when I asked the wife I got the does not sound any different to me.:meh: Next on the mod list is to raise the receiver outlet 2".

IMG_9384[1].JPG
IMG_9386[1].JPG
IMG_9385[1].JPG
 
Installed some extended front stabilizer bar links fabbed for me by @reevesci. Also installed a new front stabilizer bar ( the holes where the links go through were oblong instead of round)

IMG_2015.JPG


View attachment 1461692

IMG_2018.JPG


IMG_2022.JPG
 
abuck99 said:
Installed some extended front stabilizer bar links fabbed for me by @reevesci. Also installed a new front stabilizer bar ( the holes where the links go through were oblong instead of round)

View attachment 1461691

View attachment 1461692

View attachment 1461693

View attachment 1461694
Click to expand...


I have had MANY emails and PMs on the extended links. I just received all the OEM Toyota bushing blocks and the DOM tube. I will have these available in a few days. 80$ a pair shipped. PM or email me to get on the list. I have 17 pre-ordered currently.

I was going to offer an aftermarket bushing, but after working with them... NOT A CHANCE!!!!!! OEM Toyota ONLY!

Yes, I will also have the extended rears as well. 70$ a pair shipped.

Jason
 
^ could be my imagination but the front end feels tighter, slightly flatter turning(less body roll). Could be the new stabilizer bar, or the combination of both extended links and new stabilizer bar.

I've only driven it 15miles, but so far it feels worthwhile. The links now sit upright vs being pushed over.

Not sure why this mod hasn't been addressed earlier(other than a couple of inmates doing some R&D). Seems to me when you lift the front 2" you need to adjust the stabilizer link height at the same time( same as the rear)
 
Looks great, you also removed the roof rack... how did you cover the remaining holes?
I covered mine provisionally with tape until I receive the plastic covers

LXander said:
New to me LX470 and first modification. Took off the running boards. Very happy with the results. Seeing everyone's work is very inspiring. Love these trucks!

Before:

View attachment 1460753

After :

View attachment 1460754
Click to expand...
 
viducce said:
Looks great, you also removed the roof rack... how did you cover the remaining holes?
I covered mine provisionally with tape until I receive the plastic covers
Click to expand...
Hi, The rack was removed when I bought the truck. I don't think it ever had one. There are some plastic/rubber strips over the location of what would be the mounting locations. Let me know if you want pictures.
 
Tailgate refresh R50 Richlite thanks to @TrekboxX

upload_2017-5-18_11-7-35.png
 
Last edited:
You must log in or register to reply here.

Similar threads

modus
What parts do you recommend replacing on a 260K miles 100 series?
Replies
12
Views
1K
cbbr
cbbr
C
What mods do you regret on your 100 series?
4 5 6
Replies
100
Views
18K
Exiled
Exiled
huuunnnt
What is the 100 Series stock ride height?
Replies
9
Views
1K
Manhattan
Manhattan
harpersferry100
Having my fuel tank dropped, while it's out, what else to replace?
Replies
9
Views
883
OEMGUY0720
OEMGUY0720

Users who are viewing this thread

  • ... and 2 more.
    • Total: 65 (members: 8, guests: 57)

    Share this page

    Back
    Top Bottom