What have you done to your 100 Series this week? (96 Viewers)

[dasgeek]

Went on a hike with the kids and had to do some unexpected wheeling. Caught one of my running boards.

I needed new tires, so I decided the day has come: good by running boards....

Easy except for one bolt that was a little hard to get to. It was behind the AC lines on the passenger side.

Looks better already...

Now add some BF Goodrich KO2's - 285 17 R16

Ready for some wheeling:

 

[mgoblue]

Dropped my LX off to @OTRAMM with a laundry list - Diff Drop - BIO bumper/sliders - Engo 12000S - Rear shock spacers - Coil spacers - AHC flush - AHC sensor lift/TB bar adjustment. He does great work at extremely reasonable prices, I can't recommend him enough!

 

[offroadkid]

This weekend I took advantage of working at a Mercedes dealership and used my hoist and work tools, my own time, and replaced the timing belt, water pump, idler pulley, tensioner and tensioner pulley on our 98 LX with 247K miles! Also I got front and second row replacement seats out of a 2001 LX at a local Toyota/Lexus/Scion wrecking yard to replace the torn ones that came with our girl!

The passenger seat was very torn up, and I was able to get both front seats, (grey) for $350, and then went back and got the entire second row seats for $250!! The rear seats were torn also. Now I have front, second row, and third row seats sitting in the garage!! I will sell the old 1st and 2nd row, and keep the 3rd row.


I used the Aisin TKT-021 kit from Amazon, and t-stat, FIPG, and coolant from Toyota. If you didn't already know, Lexus owners can log into their "Owners" account on the Lexus website, choose "Service History" and manually add repairs. It requires a RO# and the Repair Facility name, but I was able to add my repairs! Just something I thought was neat!

 

[Julian Stead]

This weekend I took advantage of working at a Mercedes dealership and used my hoist and work tools, my own time, and replaced the timing belt, water pump, idler pulley, tensioner and tensioner pulley on our 98 LX with 247K miles! Also I got front and second row replacement seats out of a 2001 LX at a local Toyota/Lexus/Scion wrecking yard to replace the torn ones that came with our girl!

The passenger seat was very torn up, and I was able to get both front seats, (grey) for $350, and then went back and got the entire second row seats for $250!! The rear seats were torn also. Now I have front, second row, and third row seats sitting in the garage!! I will sell the old 1st and 2nd row, and keep the 3rd row.


I used the Aisin TKT-021 kit from Amazon, and t-stat, FIPG, and coolant from Toyota. If you didn't already know, Lexus owners can log into their "Owners" account on the Lexus website, choose "Service History" and manually add repairs. It requires a RO# and the Repair Facility name, but I was able to add my repairs! Just something I thought was neat!

How long did the timing belt take using a ramp and air tools, just asking as I have a timing belt on mine to do and I rent a ramp, just wondering if it easy to finish in a day.

 

[ToHiHy]

Busy week. New Headlights, windshield, linexd below the headlights and below the body side mouldings, painted body side mouldings, wet sanded and polished the paint, installed Safari snorkel and some limb risers. Painted my chrome grill, black.

 

[cmck]

Busy weekend and nice result!

 

[crimsonaudio]

Allowed my teenage kid to drive the family home from our Easter trip, beat my best real-world trip milage by 1.2 MPG. Of course, I drive 10-15 mph faster...

 

[cmck]

Upgraded the battery terminals with military style with 3/8" posts today. I also added a Slee distribution block that suits the stock horizontal orientation. The short ground wire going to the body was upgraded to 4awg. I used the adhesive shrink tubing and feel it will seal really well. This is in preparation of the 2nd battery install coming soon, using the new Slee battery and air compressor tray.
The hardest portion was removing the factory terminal which is crimped onto the 2 gauge ground wire. I ended up having to use a cut off disc to cut into each side of the clamp to remove the wire without damaging it.

Photos include: the before, the removal of the ground wire and the finished install.

 

[Couvi]

Found my driver's side floor vent behind the carpet. It's the little things.

 

[smakee]

Remounted my raw steel Dissent front bumper so I could drive up to get my Gamiviti rack today. Tim helped me get it mounted up and it looks freaking awesome. Huge endorsement! Will post some pics tomorrow with the faring and without. The faring hides the 42" light bar direct mounted to the rack. Can't wait to get it wired up and tested.

 

[ChuckB]

Just pulled P0300, P0301, P0303, P0304 codes which popped up on our road trip home. Now to start the process of elimination on the cause.

 

[offroadkid]

How long did the timing belt take using a ramp and air tools, just asking as I have a timing belt on mine to do and I rent a ramp, just wondering if it easy to finish in a day.

Hey Julian!

It should be doable in one day! I spent two days after work, about 3 hours the first night until I had to leave when they closed and locked-up the shop, then 4 hours the next night again until I had to leave. My buddies hung out and watched and there was a lot of BS'ing happening, I think I will be faster on the next one!!

 

[savirc]

Busy week. New Headlights, windshield, linexd below the headlights and below the body side mouldings, painted body side mouldings, wet sanded and polished the paint, installed Safari snorkel and some limb risers. Painted my chrome grill, black.

View attachment 1232112

View attachment 1232113

View attachment 1232114

I like that bar on the side of the rear bumper, did you do that your self?

 

[Julian Stead]

Hey Julian!

It should be doable in one day! I spent two days after work, about 3 hours the first night until I had to leave when they closed and locked-up the shop, then 4 hours the next night again until I had to leave. My buddies hung out and watched and there was a lot of BS'ing happening, I think I will be faster on the next one!!

Ok thanks, I might give it a go on the weekend...

 

[OSTATECRUISER]

Was the part number stamped in to the body? Mine didn't have the white paint but I suspect they stopped stamping the bodies years ago.

To be honest i didn't look for part numbers stamped or stickered. I put Bilsteins on Sequoia and OME on LC. So i didn't pay attention to original part #'s.

 

[Jackson Sanders]

Got around to replacing the steering rack bushings on my '00 LX yesterday. What a difference! She drives so much tighter and tracks straight going down the highway again. It was so much easier than all the threads made it out to be. Turned out to be pretty painless, I was in and out of there in about 3 hours while casually chatting with my dad the whole time.

 

[nmatcek]

Does that 4x4 labs tire carrier pivot on the left side? Why put the spare that far out - creating that much leverage - instead of putting it closer to the spindle?

Looks to me like the latch is on the driver's side and the pivot is on the passenger.

 

[PabloCruise]

Last week the shop replaced these:
AAE 3978N Rack and Pinion Complete Unit
BECK/ARNLEY 0361864 (036-1864) Valve Cover Gasket
BECK/ARNLEY 0361863 (036-1863) Valve Cover Gasket
BECK/ARNLEY 1014850 (101-4850) Tie Rod End
BECK/ARNLEY 1014851 (101-4851) Tie Rod End
VICTOR REINZ B31702 Oil Filter Adapter Gasket


Today i replaced this:
DENSO 2213152 (221-3152) Radiator


And used this:
Amazon.com: Zerex 675130 Asian Vehicle Anitfreeze / Coolant - Gallon: Automotive


I bought the coolant at local auto parts store. $15 vs. $29 at dealer.

Sounds like you dropped some coin!!!

 

[PabloCruise]

Went on a hike with the kids and had to do some unexpected wheeling. Caught one of my running boards.

I needed new tires, so I decided the day has come: good by running boards....

Easy except for one bolt that was a little hard to get to. It was behind the AC lines on the passenger side.

Looks better already...

Now add some BF Goodrich KO2's - 285 17 R16

Ready for some wheeling:

I have heard people really like those KO2s...

 

[Ryan Carroll]

Dropped my LX off to @OTRAMM with a laundry list - Diff Drop - BIO bumper/sliders - Engo 12000S - Rear shock spacers - Coil spacers - AHC flush - AHC sensor lift/TB bar adjustment. He does great work at extremely reasonable prices, I can't recommend him enough!

wish there was a shop like this in the Hampton roads area!!