I may have to disagree, I've got a friend with an 80 with no front or rear sway bar and when his rear axle flexes out, his springs shoot out, literally. I'd say it gives increased articulation -- too much. (He now has custom brackets to hold his springs in.)
What Did You Do with Your 80 This Weekend? (36 Viewers)
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I may have to disagree, I've got a friend with an 80 with no front or rear sway bar and when his rear axle flexes out, his springs shoot out, literally. I'd say it gives increased articulation -- too much. (He now has custom brackets to hold his springs in.)
I think a lot of that has to due with the length of shock. But I do agree without the sway bar it does flex a little better.
My front swaybar has been out for about 4 years now, but always ran the rear. After rubicon this year my rear swaybar is bent. It's not bent from being hit on rocks, i guess it's bent from the flex.
My front swaybar has been out for about 4 years now, but always ran the rear. After rubicon this year my rear swaybar is bent. It's not bent from being hit on rocks, i guess it's bent from the flex.
This would have been awesome for when I had a sway bar...
Fit up and wired in my stock bumper winch. (Finally)
murf
Lifer
I dont think this will be an issue as he is only offering disconnects for the front, not the rear.
Aggiesdm
***** Regular
Actually, all I did was clean it really well. The PO's filthy hand-goo that covered it must have preserved the original white lettering. It was black when I got it, but a little Simple Green cleaned it up nice.
And just to let everyone know...the 8-Ball lighter was a heck of a deal at Autozone for $1. I think it really classes up the ride.
Finnyfam60
Driving miss daisy
Yes please!
Got my roof rack and hatch ladder back from the powdercoater today. Light bar/work light will get wired this weekend.
sethzilla
SILVER Star
Hit the "seasoned" mark.
Pioneer AVH-8500BHS install
Installed new Pioneer AVH-X8500BHS.
Pulled dash.
Soldered wiring harness and finished with shrink-wrap.
REMEMBER to UNPLUG factory amp next to Glove Box if you are using the Toyota alternative (Grey) harnesses and not the original connector ( I don't even know how you could use original harness. The amp speaker output is wired in parallel with the grey harnesses, and if you do not unplug it, you will blow out your new head unit.
Installed new USB wiring channel into center console with 1" hole drilled, so I can put iPhone in console when connected.
Put it all back together and it worked. BUT, found out that the included USB extension WILL NOT work with Pioneers AppRadio and iPhone 5 unless you buy another $100 worth of special cables. Not happy about it, but ordered cables anyway so I can use things like Waze on the head unit instead of iPhone. With the new cables, you can run your apps on the 7" touch screen on the head unit instead of iPhone.
Today's project will be to install Kicker Hideaway sub and new cables. I will keep updated on progress. Also bought a bunch of Dynamat to sound deaden.
Installed new Pioneer AVH-X8500BHS.
Pulled dash.
Soldered wiring harness and finished with shrink-wrap.
REMEMBER to UNPLUG factory amp next to Glove Box if you are using the Toyota alternative (Grey) harnesses and not the original connector ( I don't even know how you could use original harness. The amp speaker output is wired in parallel with the grey harnesses, and if you do not unplug it, you will blow out your new head unit.
Installed new USB wiring channel into center console with 1" hole drilled, so I can put iPhone in console when connected.
Put it all back together and it worked. BUT, found out that the included USB extension WILL NOT work with Pioneers AppRadio and iPhone 5 unless you buy another $100 worth of special cables. Not happy about it, but ordered cables anyway so I can use things like Waze on the head unit instead of iPhone. With the new cables, you can run your apps on the 7" touch screen on the head unit instead of iPhone.
Today's project will be to install Kicker Hideaway sub and new cables. I will keep updated on progress. Also bought a bunch of Dynamat to sound deaden.
Installed new plugs... No wonder there was a slight miss and getting worse than normal gas mileage.
NLXTACY
Wits' End
Finally installed the supercharger.
Yes! Approved.
NLXTACY
Wits' End
Sweet!! I need me one of thoseMaybe I'll treat mine to one after she hits 400k miles
Only took me four damn years to get to it
My truck has 312k miles now. Only a few thousand on the rebuild.
Only took me four damn years to get to it
My truck has 312k miles now. Only a few thousand on the rebuild.
Would I be asking too much of my motor if I slapped one on while still on the original HG?
I'm less than 125 miles behind you.
Ready for 200 more
Would I be asking too much of my motor if I slapped one on while still on the original HG?
Nahhh. I say you will blow the HG regardless of the supercharger or not. If it's going to go it's going to go
