I got mine today, install took 10 or 15 minutes. Speeded up the windows significantly...and I'm sure the difference will be even greater when it's cold. 😎
Before:
After:
Agreed here - alignment between rails is critical to not stripping any gears. I run both rails to their stops and then back off the same amount on each side before assembly.
I share that experience with seat gears stripping again and again. What seems to have worked for me is disassembling everything 100%, cleaning, greasing, assembling and verifying alignment of both sides. Then gears hold up well.
definitely cheaper, but end result may not be the same, I've replaced all of my motors, and it didn't improve anything. defintely not cheap but having slow windows for 10+ years dispite my efforts, and having them twice as fast after a 15 min...
I just installed mine... took about 15 min... stupid simple. cut the time in half, it's about 80* today and down it took about 3.5 seconds, up it took almost 6. (that was rolling all windows up at once... I did that because that was when I...
Yes
Normal for this rig as I have a push button start wired up to a hidden switch and an adjustable timer relay that disables all of the security cameras and DVR to avoid voltage spikes during cranking.
With the engine off, it will show these...
Little update on this....
Finally got around to doing it earlier today
I guess the 97's are different cause the only bulb that had the green condom was the one on top
The rest are all clear bulbs
That being said, I ordered two different...
Ok, finally got around to tackling this
I never really cared for the "D" light because it was the only light that wouldn't dim with the dimmer
After installing a DVD player many moons ago, I wanted it to be completely dark with the screen on...
I installed a strobe light kit many moons ago and figured I'd pull the driver's side interior quarter panel to take photos of the power supply for my upcoming listing :cool:
Found this loose connector and have no idea what it's for :hmm:
Mine was out when I got it. It it's broke I fix it, that's the way I roll.
Replacement is straightforward, although you will have to wiggle the cluster to get it out. It's a tight fit. I found that I had to tilt the top forward and then pulled...
If anything ever went wrong with it, just reinstall the original Relay and you're back to slow windows. Seems like an easy 🍌 mod for someone willing to give it a try.
It’s worth it. I’d changed the runs, greased and cleaned, siliconed the runs and nothing really improved. Especially slow in winter. I’d hoped a product like this would come out when, years ago, Icon mentioned how they upgraded the electrical to...