What drink holder is that? I need me one of them!
What Did You Do with Your 80 This Weekend? (52 Viewers)
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
No idea. Was in there when I bought it.
Somebodyelse5
16124-75030
Got around to doing the other two "cup holders" tonight. For those that like working with leather, this is 5oz vegetable tanned Walpier Buttero that I had left over from some mouse pads / cup holders I made as gifts a while back.
Also, installed a MagMic for my Ham Radio mic on the side of the center console. This things are sweet.
Last week I swapped my FTM400 over from my 100, head unit is installed in the lower console and the face plate is mounted on a RAM ball on the grab handle with a mount from @NLXTACY (Thanks Joey, that mount is killer)
BillyGoatMTB
SILVER Star
This is on my winter to do list. 2 week ish turnaround,?
BillyGoatMTB
SILVER Star
Watch the AC clutch engage as well as let it get ice cold. It will cycle while at idle you can hear it and watch it.Going to look at / probably buy an 80 tomorrow
Few questions:
How do I test A/C during the winter time?
And I noted the front steering knuckles are suspiciously clean on the outside, which makes me a little skeptical, any easy way to check for birf soup / make sure that steering knuckles have grease in them?
Birf soup, don't be scared, you'll be rebuilding the axles anyway and if it doesn't have factory lockers that's great, slap in ARB lockers and 4:88 gears are a DREAM To drive, wheel, rock crawl and highway Mountain smash!!!!!!!
Slee has a great 80 series newbie guide if you didn't already have it.
80 Series Newbie Guide - Slee Off Road
As soon as the excitement of the purchase starts to fade, the questions start popping up. What modifications can I make? What are those 4 bolts on the back
sleeoffroad.com
Super excited for you, good luck!
Thankyou!Looks to be this:
80 Series/LX450 Double Cup Holder – BH3D Printing
www.bh3dprinting.com
Installed CDL switch on my '93
Did you have to send yours in? Or do they have cores they can cross ship?
You selling these?
Somebodyelse5
16124-75030
Not technically, but I can make you some if you want
Used it as a bench
SteelHunterFJ80
SILVER Star
Check out this one.... from what I last heard is no longer possible to get beaudesert shipped here. Also if you have a credit card that does a fair Australian dollar to US dollar is a pretty good deal.
PPD exhaust
Used the free Saturday to do my first real job on the 80. Swapped out the diff oil in all 3 diffs, swapped the trans fluid and trans filter, changed the fuel filter, and did a full engine tune up. There was some grease in the front diff so it looks like a birfield job is in my future. I also found a pretty massive exhaust leak coming from the aftermarket header down pipe to the factory cat back. So I’ve got a couple more projects on the horizon.
Correct, not possible without much effort
Today I rebuilt both knuckles and put some 97 lx450 brakes on the front.
I remember ordering electrical components in the past and they always seemed to follow a similar formula for a basically identical part-
Residential - 1x
Automotive - 2x
RV - 3x
Marine - 5x
Aviation - 10x
I should probably add 80 series NLA parts to that list at about 10x as well.
BillyGoatMTB
SILVER Star
Love my CDL, I have been hunting down driveline vibrations and being able to pull a driveshaft to feel the difference makes it easy.
Thought the govt took all your guns?
BillyGoatMTB
SILVER Star
Sometimes all your guns get lost in a boating accident........... 
