So after 4500 miles, a few RTH threads, and help from @bouldertom @beno and the shop from @powderpig we are home in Florida.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
So after 4500 miles, a few RTH threads, and help from @bouldertom @beno and the shop from @powderpig we are home in Florida.
View attachment 1494816
Where did you buy them? They look good!
Installed a bunch of L-Track on my Prinsu Designs rack:
View attachment 1494975
Modified my Tepui telescoping ladder for quick disconnect using L-Track:
View attachment 1494976
View attachment 1494977
Reworked my side illumination with a single 11" 50W LED bar on each side. Amazon.com: MICTUNING MIC-5DP50 2X SR-Mini Series 11'' 50W Single Row CREE LED Light Bar COMBO Spot Flood 5000lm 500m Visibility: Automotive
I had to get creative with the mounts given the 11.5" width. Used only the brackets the kit came with and a few nuts and washers for spacers. Very little clearance on the front end of the light.
View attachment 1494978
Added marine hatches to the tailgate. More storage yay!
care to share the link where you got them .?
I found them on amazon..They work great.
Amazon.com : DPI Marine DPF1119BLK DPF Flush Series Door : Sports & Outdoors
@Dissent , I have the 8" version of that light. It fit perfectly on my Prinsu rack, and held up all rain season with no leaks.
![]()
Very nice! I looked at those but went with the 11" because they were going in the front bumper slots (until I saw the brace I need to re-work), so I put them on the rack instead.
The 11" was really easy but took a few hours of staring at them and fiddling with different brace hardware. Oh, be sure to paint the brackets, they are black oxide but will rust. I hit them with a couple of coats of roll-bar paint which matches the semi-gloss sheen of the light and rack. FWIW I aimed them at 95* to get the light more forward where I can see it better from the front seats.
Mine project really far out but I may pickup those 8" and install them forward in the front cutout by the spoiler aimed closer to the truck.
They are so bright! I wanted to mount one behind the OEM hatch spoiler (with a cut out) but it seems overkill. The 2x2 cube I have now doesn't fully cut it through the window tint.
took my newly installed 4x4 Labs rear bumper for a 4-day field-test. Oh... and I took my family along too
Wheeled on some gnarly trails, and conquered a nearly-10,000-ft-pass so as to take a different route home. What a feeling
View attachment 1494922
View attachment 1494923
That's some ambition right there. How long did it take you to gut the interior?5 yards of the Thermozite will cover the entire floor if you are willing to piece it together. I'm using carpet tape on the insulation side and metal tape in the foil side for all the pieces. I may have enough for the wheel wells if I get creative.
View attachment 1494999