What Did You Do with Your 80 This Weekend? (34 Viewers)
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Did you ever think this thread would go 1200 pages?
I'm tired of tightening up this driver side front bearing once a month, I picked up some TG units... we will see how these work out? Those alen bolts are real small.
bloc
SILVER Star
I trust the Allen bolts more than I do that thin washer in the little groove on the spindle. I know they tried to copy what goes on with our rear spindles but back there the washer is 3x as thick.
Winched up some bushes for my parents, love my winch!
EGR delete.
jfz80
Cruisin’
Cleaned up the swingout latch a little. Moved the rest pad to the arm from Bumper shell and added a travel stop so i dont bump the gate
Saturday evening she fired up on the first try and ran sewing machine smooth after two seconds of cranking. I was a little shocked myself.
Placed my new steelies on some boxes to "Mock them up", they'll be wrapped in Toyo MT 255/85R16 shortly
Paint is Valspar Massey Ferguson Gray, tractor heavy-duty paint.
View attachment 1316409
Did you spray the paint on? Looks good, are those Tacoma steelies?
LS1FJ40
SILVER Star
Parked the Camry behind the 93. Went to back out the 93. 
SONUVABITCH!
Used my cheapo HF heat gun and pushed it back out.
Thankfully, no damage to the 80!
SONUVABITCH! Used my cheapo HF heat gun and pushed it back out.
Thankfully, no damage to the 80!
Fixed my AC. Shop said I had a bad compressor. After researching here, I ordered an expansion valve and dryer from Rockauto (DENSO). Two hours labor and 80 bucks for parts and freon; blowing ice cold! Thanks Mudders!
It's nice to have the right tools for the job.
@orangefj45 got me this way cool inner axle oil seal tool. AWESOME> WIN.
With the 90310-35010 oil seal engaged for installation:
Perfect tool to have. I have one for the 90310-33085 (4x/5x/6x/7x truck inner oil seals) as well. I highly recommend one of these.
Oh yeah, I am not working on my 80, but I am working on an 80.
Nice to turn a wrench on an 80 every once in awhile. Reminds me of the old days. It's like riding a bike. Don't even think about it really now.
@orangefj45 got me this way cool inner axle oil seal tool. AWESOME> WIN.
With the 90310-35010 oil seal engaged for installation:
Perfect tool to have. I have one for the 90310-33085 (4x/5x/6x/7x truck inner oil seals) as well. I highly recommend one of these.
Oh yeah, I am not working on my 80, but I am working on an 80.
Nice to turn a wrench on an 80 every once in awhile. Reminds me of the old days. It's like riding a bike. Don't even think about it really now.
JohnnyOshow22
KK0TEQ
Lost compression in cylinder #2 on the way back to colorado from Rubithon in June. The truck was then shipped to Robbie Antonson in Boulder where it then went under the knife. Thanks for helping us figure out the shipping @beno. I finally picked it up Friday evening after a full engine rebuild and exhaust job.
After picking it up I headed to @SmokingRocks place to help him get his 80 back together.
Robbie brought me up to speed on how to break the engine in and told me a few good roads to go drive near Fort Collins, so yesterday (Saturday) the girlfriend and I took off towards Gould and the Never Summer Wilderness. Found the Silver Creek Trail and took off up it. Was not disappointed at all and saw some moose in the meadow that we camped at. Definitely glad to have the 80 back.
After picking it up I headed to @SmokingRocks place to help him get his 80 back together.
Robbie brought me up to speed on how to break the engine in and told me a few good roads to go drive near Fort Collins, so yesterday (Saturday) the girlfriend and I took off towards Gould and the Never Summer Wilderness. Found the Silver Creek Trail and took off up it. Was not disappointed at all and saw some moose in the meadow that we camped at. Definitely glad to have the 80 back.
Awesome 
JaketheSSnake
SILVER Star
That tool would have been a life saver about a week a go!It's nice to have the right tools for the job.
@orangefj45 got me this way cool inner axle oil seal tool. AWESOME> WIN.
View attachment 1316743
View attachment 1316744
With the 90310-35010 oil seal engaged for installation:
View attachment 1316745
Perfect tool to have. I have one for the 90310-33085 (4x/5x/6x/7x truck inner oil seals) as well. I highly recommend one of these.
Oh yeah, I am not working on my 80, but I am working on an 80.
Nice to turn a wrench on an 80 every once in awhile. Reminds me of the old days. It's like riding a bike. Don't even think about it really now.
View attachment 1316746
View attachment 1316747
JaketheSSnake
SILVER Star
I'm hoping not to do it again any time soon! But if I do, I'll definitely call him first.
Drove my LC up to the PA Renn Faire at Mainheim. Met the queen!
On the way home we stopped off at Trop Gun Store and Range at Elizabethtown PA. If you're ever in the area - check it out! Nice 4x4 parked outside.
On the way home we stopped off at Trop Gun Store and Range at Elizabethtown PA. If you're ever in the area - check it out! Nice 4x4 parked outside.
I used it today!
20160904_161844 by Andrew Turner, on Flickr
20160904_160514 by Andrew Turner, on Flickr
20160904_160508 by Andrew Turner, on Flickr
20160904_161711 by Andrew Turner, on Flickr
20160904_161844 by Andrew Turner, on Flickr20160904_160514 by Andrew Turner, on Flickr20160904_160508 by Andrew Turner, on Flickr20160904_161711 by Andrew Turner, on Flickr
sleepycruiser
I will get by….I will survive -Touch of Grey LC200
Blacked the gold emblem on the front along with the rest of the chrome stuff and the wheel flares.
