Orion 4:1 build (1 Viewer)

Joined
Feb 16, 2007
Messages
1,003
Location
Fort Collins
Not much to say, but a lot of grunt work cleaning and following the instructions, which were very straight forward.

IMG_20140323_163159213_HDR.jpg


IMG_20140405_183429519.jpg


IMG_20140405_194928760.jpg


IMG_20140406_170822754.jpg
 
Joined
Feb 16, 2007
Messages
1,003
Location
Fort Collins
A few more during the middle of the project.

IMG_20140325_162153665.jpg


IMG_20140324_192130778.jpg
 
Last edited:
Joined
Feb 16, 2007
Messages
1,003
Location
Fort Collins
Here is the throw-out bearing I got from Coyote John about 5 years ago, so I installed it for the Centerforce Dual-friction.

IMG_20140413_141942697.jpg


IMG_20140413_153738072.jpg
 
Joined
Feb 16, 2007
Messages
1,003
Location
Fort Collins
New stepped washers to acquire finer tolerances.

IMG_20140405_171125447_HDR.jpg


IMG_20140405_174946793.jpg


IMG_20140412_144617023.jpg
 
Joined
Mar 13, 2006
Messages
260
Location
CO
Next step is 35s with that gearing.
 

Users who are viewing this thread

Top Bottom