QUAD HEADLIGHT CONVERSION
Well fellas the round headlights are no more! Over the last few months I've been working on a quad headlight conversion. In my relentless pursuit of dumping money into this truck, I decided to try something different...
My truck is r134a, must be the first year with it. I had some fresh o rings and blue nylog
my truck is r134a also, might be the first year with it. I had some fresh o rings and blue nylog on them. Pulled a good vacuum and recharged it. I ended...
Tbh you can just give it a good “uhhhg” on a 3/8 drive manual ratchet and you’ll be fine.
Just make sure you’ve got. Good new o ring in place with a bit of ac compressor lube smeared around it.
I’d bet $100 it’ll seal fine. Just keep power...
Did you try the link to the 93-94 manual posted under the resources section by @SmokingRocks? It looks like a great resource above and beyond the FSM. I did notice that the last update states the AC section needs to be updated to be for the...
Hasn’t…. They are close enough to work but still different since the 93-94 was r12 but I’ve never heard issues with people just dumping r134a in place of the r12. As long as there is compressor lubricant in the system (which is needed in both...
Woosh of air out or in? The case is designed to be under vacuum at idle, the intake manifold sucks air out of the case through the PCV valve. If you open the oil, cap and air rushes in, you’ve created a massive vacuum leak for the engine which...
More non-land cruiser content, but tbh I use this thread to document all my motor vehicle adventures, IMO they are all linked, so if you don't like it then meh.
I replaced the rotors with cross-drilled units, and semi-organic pads, then I bled...