I’m in for a full set of what you come up with. Those look darn good.
well here is a first small production run batch of qty x 6
i have designed a Service Soec. OEM Themed Pigtail as follows :
- Blue w / Oarnge Tracer : B+ incoming from a Fused Source ( such as a UN-used Tap assy. in the fuse panel )
- Blue w/ white Tracer : Switched B+ Fused Out to Device such as a FOG or AUX Lamp or Ditch Lights etc ....
- This Depression Mode in or engaged also taps and illuminates the AMBER ON or Active device ON mini horizontal Bar
- the white w/ Black tracer is the main general switch Ground side circuit
- now the VERY important detail to take note of : this switch has a independent interior illumination circuit that gets tied in to your dash , HVAC panel and other display lamps and lights that get active with both parking lamps and headlights engaged alike.........
- i DO NOT recommend tieing in to the Rheostat dimmer side of interior illumination , but that's the owner operator 's installers call ...and just my 2 cents ......
- the red w/ black tracer stripe is B+ feed in interior illumination
- the Solid Yellow is the needed independent ground NEG- of the interior illumination circut
DO NOT cheat and try to tie in both grounds the easy way \
- i think dome fj60 devices are controlled by the NEG_ side ground , but if you follow my above prescribed install spec's you will have NO issues
and NO issues is good ..........for
2021
-
photos do not due the justice , the LED's Lumens have a warm welcoming rich glow crisp and sharp .....just like 84160-90A02 had so long ago