sleeoffroad
Supporting Vendor
Measured at the highest point on the rear (top of the roofrack) it is 83.5"
TX plate white SAS? (1 Viewer)
- Thread starter farinvail
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
so the same height as mine with the AO rack mounted and the high lift bracket installed....but a lot more ground clearance 
Looks like my garage is 82.5".
One inch short!
I'll just have to show my wife how to air down before parking in the garage
One inch short!
I'll just have to show my wife how to air down before parking in the garage
sleeoffroad
Supporting Vendor
I thought I would add these here.
BEFORE
AFTER:
Just about ready to be picked up.
BEFORE
AFTER:
Just about ready to be picked up.
Last edited:
It just looks surreal...since there are only two SAS, more than 2.75" lifted 100's out there.
sleeoffroad
Supporting Vendor
And here is the business end of it all.
Man, I feel like a kid on christmas eve, I may not get any sleep tonight. I don't know which I am more excited about getting my 100 back or a week of skiing, I think its getting my 100 back, by a landslide.
I'm even excited to hear about how it drives from you. I couldn't imagine how excited I'd be if that was my 100!
... hopefully some day mine will be like yours.
that's what I'm thinking!
AHHHHHHHHHHHH!!!!!!
I want!!!!
AWESOME.
I want!!!!
AWESOME.
Damn. That came out sick.
I'm at a loss for words! Congrats pesimsmd & enjoy! 
The valet at Vail is in for one heckuva week... 
Cruiserdrew
On the way there
THat Hi9 housing is just incredible. That would eliminate some of the concern with the "Hi8" stock differential.
Are the side gears broached for Toyota splines or is everything including the inner axles custom?
I see wheel spacers. Was that to get the WMS right? Does the axle use 80 series inners or something custom?
Are the side gears broached for Toyota splines or is everything including the inner axles custom?
I see wheel spacers. Was that to get the WMS right? Does the axle use 80 series inners or something custom?
The valet at Vail is in for one heckuva week...
They were freakin out over mine last year, this one should BLOW their mind.
what makes you think I would let the Valet even touch this rig.
I got to Slee's and pictures do not do it any justice. This is a 100 on serious steroids, its makes a similar set up 80 look just puny. It drives very smooth, not as nice as the IFS, but I would not expect it too either. It does drive like an 80 with more power. I think the gearing needs to be higher than the 4.88, but no one makes one higher. The lack of pep, may be related to the 35 inch tires, or all that extra weight its carrying. But it will still cruise at 75-80 without any problem. Not sure i would want to go any faster than that anyway. Christo and Joe, took care of the little things that made this truck even better, then stock. For example, instead of installing the ARB locker switches, they installed the factor elocker switch from an 80, which makes the interior looks so much cleaner. They also installed a factory fog light switch for my PIAA lights. All of the attention to detail, just pays off.
All I can say is that this rig has far exceeded my expectations, and if you would ask me would I do it again, I would have to say " what took you so long, in the first place" This thing is a beast. I can't wait to take it out on the trail.
I will write more and submit more pictures once I get back to Houston.
Last edited:
Looking forward to seeing it back in Houston. Enjoy the road trip back home.
Valet didnt drive mine either, but they still freaked out over it.
