SOA pic thread (1 Viewer)

[kling-on]

Ok I searched and didnt find one so ... LETs get one goin post pics of your SOA rig and tell us what you did on it

 

[camcruiser13]

ugh where do i start,

lets see if i can did up some soa photos, alot is in the sig line, but i notice not alot of my soa write up is there

here is a close up of the front





i have soa on stock springs.
flipped front and rear springs
shackle reversal in the front with ruffstuff kit
ram assist to help turn the meats
longer shocks
longer brake lines


im thinking still

 

[kling-on]

ugh where do i start,

WITH 3/4 PROFILE PIC PLEASE

 

[matchan420]

ugh where do i start,

lets see if i can did up some soa photos, alot is in the sig line, but i notice not alot of my soa write up is there

here is a close up of the front





i have soa on stock springs.
flipped front and rear springs
shackle reversal in the front with ruffstuff kit
ram assist to help turn the meats
longer shocks
longer brake lines


im thinking still

Looks purdy.

 

[BDSeff1fitty]

i'd say get a frame height measurement for each rig as well since it gets posted occasionally and exactly whats done i.e shackle reversal, spring flip, different springs

 

[Fast Eddy]

When it's twisted up like that, how much difference is there in the shackle angles of the two sides? What length shackles? Pics if you have them.

Thanks

 

[matchan420]

Here is my SOA with rear FJ55 springs on all four corners. All the rest is in my sig line except Poser rear disc brakes, extended brake lines, the amazing pittman arm, Redline moved the rear hangers back about 3 inches because of the longer springs to achieve better shackle angle, and whatnot.

 

[matchan420]

Oops, here are the pics

 

[youmustbecrazy]

SOA

Here is where I sit as of today. SOA, Shackle reversal, 60 springs in the rear, Ruff Stuff hangers, home made shackles.

 

[Deny]

Spring over on stock leaves, with slightly longer shackle up front and a really long shackle (probaly 3in over stock length) in the rear.

Cheers,
Deny

 

[Trollhole]

I'll play.

35's SOA Rear springs flipped.
Stock springs.
Crapper shackles out back.
Stock length up front.
Front axle C&T.
Frame height is 22"

Now sporting 4x4 hysteer up front (Was an aqula arm)
All the sheetmetal in the rear was redone to make it look stockish without hacking it up.

 

[nuclearlemon]

springs swapped
soa
homemade shackle reversal setup using oem parts
36" swampers
no cnt (no handling issues, got close to 100mph once...don't recommend doing that in a top heavy short wheelbase rig regardless of whether it has a cnt or not)
1 1/2'' shackles frenched in frame in front, was 2 1/2'' in rear, but went down to 1 1/2''

 

[matchan420]

Nuclearlemon, I am loving your rig! well done.

 

[camcruiser13]

When it's twisted up like that, how much difference is there in the shackle angles of the two sides? What length shackles? Pics if you have them.

Thanks

ill look for pics i know i have some.. they are just barely longer than stock. hold that thought ill find them

 

[gado]

Oops, here are the pics

Hey matchan420, good day!

Can you please post a close-up view (multiple shots will be much appreciated) of the passenger side installation? And also, please write down the materials you used. Did you cut and turn? I'm contemplating of re-doing my SOA conversion on my 40. Hope you can share your procedure when you did your conversion.

TIA.

Cheers!

gado

 

[matchan420]

Gado, I will...most likely on sat. I hope this post continues, I would like to see lots of pics. I need some IDEAS!! Everyone who has posted, great rigs! CAMCRUISER, thanks a lot from my wife, now she sees my plans of a ram assist GREAT THREAD! Youmusrbecrazy, could you post more pics?

Thanks!

 

[Fast Eddy]

ill look for pics i know i have some.. they are just barely longer than stock. hold that thought ill find them

 

[I Tried]

SOA on 35's

 

[JasonH]

Stock springs, rears flipped, stock front shackles, slightly longer rear shackles. Knuckles were cut and turned. 37" Irok radials.

 

[fivetreoh]

Your rig is so sick Jason. Nice work.