davidp14
SILVER Star
Smoke screen. Keeping that Jeep at bay!! (He was actually a cool guy).
SAS SAS #9 Official Page 08/04/25- 08/08/25 (32 Viewers)
- Thread starter POTATO LAUNCHER
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
When I got stuck in that area last year @Beastiethe70 set up a winch line from the top of the hill to drag my a$$ up. I was almost to the top, probably just about where the photo was taken. Maggie knows what the hell she's doing and had the whole rigging set up and was actively pulling when a "Jeep dude" parked, ambled over near her, and stood about 2' from a winch line under tension. He then proceeded to tell her how she should be doing things. The fact that he was standing so close to a winch rope with 5000+lbs of tension said it all.
So yeah, Lake Como sometimes has uncool Jeep guys too.
Apparently that hill is the max limit for a 2F carb. Same thing happened to four of us in one day on that same little stretch - conked out from fuel starvation. The pump could send just enough to keep my truck idling but couldn't build up level in the float bowl. Any amount of throttle would hoover up the dregs of fuel in the bottom of the bowl and cause a stall.
RevISK
SILVER Star
That same section was where I may have seen the need for a rear locker.
As for the fuel issues, 3FE for the win!
As for the fuel issues, 3FE for the win!
Quit braggin'!
And yeah, one of the turns on that short stretch was pretty dang rutted out last year. It's also the steepest 20' of the trail. I can see a locker there.
RevISK
SILVER Star
I did make it the second stab, just got cocky on the first.
Mike Shull
Let’s go…
I got mine a lot going up loose steep hills just out of comfort and as attempt to not rip stuff up.
I'll probably eventually regret that when a solenoid craps out prematurely. Which now makes me think I should have a spare.
Rear axle delete
@RevISK I got up that rutted twisty thing on the first shot, but with no locker I have to carry momentum. It's a bouncy ride.
Ditcherman
SILVER Star
We aim to serve.
Also, I didn't notice any carb issues at all going up that hill. Must be doing something right.
If I get a Rig with no lockers and a carb can I run with the big Dogs 
If I get a Rig with no lockers and a carb can I run with the big Dogs
With enough speed, prayer, and willingness to wreck stuff, you can do anything.
gonzopancho
SILVER Star
I admit, I flinched. Twice.
A typical 6x19 construction 1/2" “winch line” with a yield strength of 26,600 lb has a WLL of around 5,320 lb assuming a 5:1 safety factor.
Upgrade to a 1/2” 19x19 compacted rotation-resistant line and the yield strength goes up to 29,760 lb, but a 5:1 safety factor brings the WLL back down to 5,952 lb, but most folks won’t spend for that. It costs 2x what the 6x19 costs.
This might be where I point out that Warn and others sell 3/8” “12,000 lb capacity” wire rope. The construction of same is unspecified, but 3/8” 7x19 GAC “tow cable” has a yield strength of 14,400 lb and the WLL brings this to 2,880 lb.
Assuming the truck never went vertical and things didn’t get too dynamic, you probably didn’t get 5,000 lb on the line, but things do go wrong from time to time…
Snatch blocks save lives.
(next time ask the Jeep owner if he’d prefer straddling the line.)
Last edited:
This is why I missed this years event . I hope who ever won our catch can system enjoys it! We are seeking an A level Land cruiser Tech. Job and pay info
in the Employment section . Credit to Karl thanks for posting shop pics. I decided to go full retard as well .You're right we spend more time in our shops then we do at home. Might as well be nice !
"We’re not all the way finished with the new shop yet—still a few small organization details to wrap up, plus waiting on our sign and new front door. But as of today, we’re officially open for service!
Stop by and see us:
1110 Valley St, Unit D
Colorado Springs, CO 80915
Hours:
Monday–Thursday, 8 AM to 5 PM
Come check out the new space—we’re excited to get back to doing what we love!
Cruisers and coffee style grand opening is in planning we will announce the date next week ."
in the Employment section . Credit to Karl thanks for posting shop pics. I decided to go full retard as well .You're right we spend more time in our shops then we do at home. Might as well be nice !
"We’re not all the way finished with the new shop yet—still a few small organization details to wrap up, plus waiting on our sign and new front door. But as of today, we’re officially open for service!
Stop by and see us:
1110 Valley St, Unit D
Colorado Springs, CO 80915
Monday–Thursday, 8 AM to 5 PM
Come check out the new space—we’re excited to get back to doing what we love!
Cruisers and coffee style grand opening is in planning we will announce the date next week ."
RevISK
SILVER Star
I won the catch can but since I don’t have an 80 series, donated it to @mesa man and @Mesa WomanThis is why I missed this years event . I hope who ever won our catch can system enjoys it! We are seeking an A level Land cruiser Tech. Job and pay info
in the Employment section . Credit to Karl thanks for posting shop pics. I decided to go full retard as well .You're right we spend more time in our shops then we do at home. Might as well be nice !
"We’re not all the way finished with the new shop yet—still a few small organization details to wrap up, plus waiting on our sign and new front door. But as of today, we’re officially open for service!
Stop by and see us:
1110 Valley St, Unit D
Colorado Springs, CO 80915
Hours:
Monday–Thursday, 8 AM to 5 PM
Come check out the new space—we’re excited to get back to doing what we love!
Cruisers and coffee style grand opening is in planning we will announce the date next week ."
View attachment 3974854
View attachment 3974855
View attachment 3974856
View attachment 3974857
They, in turn, donated some funny tasting salad back.
I would love to stop by and see you sometime.
I am an A (YouTube) level mechanic after all.
Last edited:
This is why I missed this years event . I hope who ever won our catch can system enjoys it! We are seeking an A level Land cruiser Tech. Job and pay info
in the Employment section . Credit to Karl thanks for posting shop pics. I decided to go full retard as well .You're right we spend more time in our shops then we do at home. Might as well be nice !
"We’re not all the way finished with the new shop yet—still a few small organization details to wrap up, plus waiting on our sign and new front door. But as of today, we’re officially open for service!
Stop by and see us:
1110 Valley St, Unit D
Colorado Springs, CO 80915
Hours:
Monday–Thursday, 8 AM to 5 PM
Come check out the new space—we’re excited to get back to doing what we love!
Cruisers and coffee style grand opening is in planning we will announce the date next week ."
View attachment 3974854
View attachment 3974855
View attachment 3974856
View attachment 3974857
Looks nice Randy!
Mike Shull
Let’s go…
I was thinking about applying but my specialty is mistakes and rework when it comes to working on Land Cruisers. One thing that I can say is that I am very consistent!This is why I missed this years event . I hope who ever won our catch can system enjoys it! We are seeking an A level Land cruiser Tech. Job and pay info
in the Employment section . Credit to Karl thanks for posting shop pics. I decided to go full retard as well .You're right we spend more time in our shops then we do at home. Might as well be nice !
"We’re not all the way finished with the new shop yet—still a few small organization details to wrap up, plus waiting on our sign and new front door. But as of today, we’re officially open for service!
Stop by and see us:
1110 Valley St, Unit D
Colorado Springs, CO 80915
Hours:
Monday–Thursday, 8 AM to 5 PM
Come check out the new space—we’re excited to get back to doing what we love!
Cruisers and coffee style grand opening is in planning we will announce the date next week ."
View attachment 3974854
View attachment 3974855
View attachment 3974856
View attachment 3974857
Great shop, congrats and good luck with the search!
CenTXFJ60
SILVER Star
Does anyone know who these glasses and water bottle belong to? They were left in my campsite which was by the registration area.
I didn't catch the name of your business, but I need a catch canThis is why I missed this years event . I hope who ever won our catch can system enjoys it! We are seeking an A level Land cruiser Tech. Job and pay info
in the Employment section . Credit to Karl thanks for posting shop pics. I decided to go full retard as well .You're right we spend more time in our shops then we do at home. Might as well be nice !
"We’re not all the way finished with the new shop yet—still a few small organization details to wrap up, plus waiting on our sign and new front door. But as of today, we’re officially open for service!
Stop by and see us:
1110 Valley St, Unit D
Colorado Springs, CO 80915
Hours:
Monday–Thursday, 8 AM to 5 PM
Come check out the new space—we’re excited to get back to doing what we love!
Cruisers and coffee style grand opening is in planning we will announce the date next week ."
View attachment 3974854
View attachment 3974855
View attachment 3974856
View attachment 3974857
Precision Land Cruisers Here is the link for the can . Catch Can System For The 1-FZFE - https://www.precisionlandcruisers.com/category/80-series/product/catch-can-system-for-1-fzfe
RevISK
SILVER Star
Looked like a really nice product, wished I could’ve used it.
