SAS SAS #9 Official Page 08/04/25- 08/08/25 (21 Viewers)

[davidp14]

Look at the Matt mobile’s mosquito defense in action! @Ditcherman, @smiledochill

Smoke screen. Keeping that Jeep at bay!! (He was actually a cool guy).

 

[CruiserTrash]

Smoke screen. Keeping that Jeep at bay!! (He was actually a cool guy).

When I got stuck in that area last year @Beastiethe70 set up a winch line from the top of the hill to drag my a$$ up. I was almost to the top, probably just about where the photo was taken. Maggie knows what the hell she's doing and had the whole rigging set up and was actively pulling when a "Jeep dude" parked, ambled over near her, and stood about 2' from a winch line under tension. He then proceeded to tell her how she should be doing things. The fact that he was standing so close to a winch rope with 5000+lbs of tension said it all.

So yeah, Lake Como sometimes has uncool Jeep guys too.

Apparently that hill is the max limit for a 2F carb. Same thing happened to four of us in one day on that same little stretch - conked out from fuel starvation. The pump could send just enough to keep my truck idling but couldn't build up level in the float bowl. Any amount of throttle would hoover up the dregs of fuel in the bottom of the bowl and cause a stall.

 

[RevISK]

That same section was where I may have seen the need for a rear locker.
As for the fuel issues, 3FE for the win!

 

[CruiserTrash]

That same section was where I may have seen the need for a rear locker.
As for the fuel issues, 3FE for the win!

Quit braggin'!

And yeah, one of the turns on that short stretch was pretty dang rutted out last year. It's also the steepest 20' of the trail. I can see a locker there.

 

[RevISK]

Quit braggin'!

And yeah, one of the turns on that short stretch was pretty dang rutted out last year. It's also the steepest 20' of the trail. I can see a locker there.

I did make it the second stab, just got cocky on the first.

 

[Mike Shull]

I did make it the second stab, just got cocky on the first.

 

[sogncab]

I can see a locker there.

I got mine a lot going up loose steep hills just out of comfort and as attempt to not rip stuff up.

I'll probably eventually regret that when a solenoid craps out prematurely. Which now makes me think I should have a spare.

 

[CruiserTrash]

View attachment 3974394

Rear axle delete

@RevISK I got up that rutted twisty thing on the first shot, but with no locker I have to carry momentum. It's a bouncy ride.

 

[Ditcherman]

Look at the Matt mobile’s mosquito defense in action! @Ditcherman, @smiledochill

We aim to serve.

Also, I didn't notice any carb issues at all going up that hill. Must be doing something right.

 

[Broski]

If I get a Rig with no lockers and a carb can I run with the big Dogs

 

[sogncab]

If I get a Rig with no lockers and a carb can I run with the big Dogs

With enough speed, prayer, and willingness to wreck stuff, you can do anything.

 

[gonzopancho]

The fact that he was standing so close to a winch rope with 5000+lbs of tension said it all.

I admit, I flinched. Twice.

A typical 6x19 construction 1/2" “winch line” with a yield strength of 26,600 lb has a WLL of around 5,320 lb assuming a 5:1 safety factor.

Upgrade to a 1/2” 19x19 compacted rotation-resistant line and the yield strength goes up to 29,760 lb, but a 5:1 safety factor brings the WLL back down to 5,952 lb, but most folks won’t spend for that. It costs 2x what the 6x19 costs.

This might be where I point out that Warn and others sell 3/8” “12,000 lb capacity” wire rope. The construction of same is unspecified, but 3/8” 7x19 GAC “tow cable” has a yield strength of 14,400 lb and the WLL brings this to 2,880 lb.

Assuming the truck never went vertical and things didn’t get too dynamic, you probably didn’t get 5,000 lb on the line, but things do go wrong from time to time…

Snatch blocks save lives.

(next time ask the Jeep owner if he’d prefer straddling the line.)

 

[raisinhell2]

This is why I missed this years event . I hope who ever won our catch can system enjoys it! We are seeking an A level Land cruiser Tech. Job and pay info
in the Employment section . Credit to Karl thanks for posting shop pics. I decided to go full retard as well .You're right we spend more time in our shops then we do at home. Might as well be nice !

"We’re not all the way finished with the new shop yet—still a few small organization details to wrap up, plus waiting on our sign and new front door. But as of today, we’re officially open for service!
Stop by and see us:
1110 Valley St, Unit D
Colorado Springs, CO 80915

Hours:
Monday–Thursday, 8 AM to 5 PM
Come check out the new space—we’re excited to get back to doing what we love!
Cruisers and coffee style grand opening is in planning we will announce the date next week ."

 

[RevISK]

This is why I missed this years event . I hope who ever won our catch can system enjoys it! We are seeking an A level Land cruiser Tech. Job and pay info
in the Employment section . Credit to Karl thanks for posting shop pics. I decided to go full retard as well .You're right we spend more time in our shops then we do at home. Might as well be nice !

"We’re not all the way finished with the new shop yet—still a few small organization details to wrap up, plus waiting on our sign and new front door. But as of today, we’re officially open for service!
Stop by and see us:
1110 Valley St, Unit D
Colorado Springs, CO 80915

Hours:
Monday–Thursday, 8 AM to 5 PM
Come check out the new space—we’re excited to get back to doing what we love!
Cruisers and coffee style grand opening is in planning we will announce the date next week ."

View attachment 3974854

View attachment 3974855

View attachment 3974856

View attachment 3974857

I won the catch can but since I don’t have an 80 series, donated it to @mesaman and @mesawoman
They, in turn, donated some funny tasting salad back.

I would love to stop by and see you sometime.
I am an A (YouTube) level mechanic after all.