Official ONSC member buying/selling thread (21 Viewers)

[joyRidaz]

FYI, I found out that these are riveted. The seller eventually posted on the SC Upstate forsake section and he responded to my inquiry.

Hope this helps someone.

Ad doesn't say whether they are welded or riveted. That might be a question worth asking if somebody is interested in these for a vehicle with disc brakes. Disc setups require the later welded rims.

Steelies and hubcaps on CL, no affiliation.


Toyota LandCruiser FJ40 Original Wheels and Hubcaps 300

http://asheville.craigslist.org/pts/4896959382.html

 

[ontherxs]

Selling a 1984 FJ60 for a guy I know through work, obviously I will post more pictures when I get a chance to go look at the vehicle or can request more detailed pictures. Just let me know and I can work out a time for someone to take a look at the vehicle, test drive, etc.

Most work was professionally done by Iron Pig Off Road.

1984 FJ60

5-Speed H55F (Installed new)
Marlin Crawler 4.70:1 toybox (installed new)
Split-case x-fer case
Twin-stick from George (orangefj45)
4.11 diffs
ARB air-lockers
ARB air compressor
Safari Snorkle with Donalson pre-air filter box and Australian-spec air-filter box from SOR

2F engine runs excellent; 149,700 miles;
Head rebuild by Simon (Tyson Automotive Machine), 4-angle grind, etc. (3,000 miles ago)
Carb rebuilt by Marks Offroad, Dissy recurved by Jim Chenoweth, desmogged
New head gasket, new water-pump, etc.
Man-a-fre ceramic coated tuned headers, 2-into-Y system
Magnaflow muffler with 2.5” cat-back system

OME Heavies lift
ARB Front Winch Bumper w/ shackles, powder-coated
IPOR custom-made Rear Bumper, spare-tire mount, hitch, ladder, shackles, power-coated
IPOR custom sliders welded to frame, powercoated
IPOR custom rock-protector bottom plate, heavy-duty, weights about 100 lbs!
Hi-lift Xtreme Jack
IPF lights
LED cabin lights
Warn 8254-50 Winch (installed new; since water leaked in it, replaced with new motor & Albright solenoid & resealed)
12Volt-Guy Winch controller inside the cab
Dual-battery setup with IPOR solenoid setup, you can self-jump with one click if the main battery is drained.
Alpine Stereo w/Bluetooth Phone and iPhone connection
10” Kicker Subwoofer
4 Jenson speakers
(5) Mickey Thompson Baja MTZ 33x12.5x15
(5) 15x8 Black Wheels, 3.25 B/S, powder-coated
Front Procomp reclining bucket seats (not pictured)
Seat covers
Chest seatbelts installed for the rear passengers also
Repainted by the previous owner a few years ago.
All fluids were drained and replaced; hubs and birfields repacked, etc.


Needs Work:

There are 3 smalls spot with rust bubbles. I grinded them down to bare metal and primed them for now. I will try to take pictures of those.
The gas door lock is missing but I still got the lock cylinder.
The original carpet is still there but would be nice to have new carpet installed

Located in Raleigh
Asking $15,000

Wow. That's like Shasta's wish list. Except diesel. I do hope he gets every penny if all that kit is in good condition.

 

[roadstr6]

For anyone looking for BFG KM2's, I found a couple of deals on NC4X4. One set of lightly used 33x10.5/15's and a set of new 35x12.5/15's:

http://www.nc4x4.com/forum/threads/33x10-50r15-bfgoodrich-km2.161069/

http://www.nc4x4.com/forum/threads/35x-12-50x15-bfg-km2s-new-never-mounted.160899/

 

[GLTHFJ60]

@ontherxs

 

[FJinTegaCay]

For anyone looking for BFG KM2's, I found a couple of deals on NC4X4. One set of lightly used 33x10.5/15's and a set of new 35x12.5/15's:

http://www.nc4x4.com/forum/threads/33x10-50r15-bfgoodrich-km2.161069/

http://www.nc4x4.com/forum/threads/35x-12-50x15-bfg-km2s-new-never-mounted.160899/

Where were those 33's when I was looking? Oh well, Griffin Bros. was running a buy three get one free special so I paid less for 4 new tires than he is asking for his used ones. FYI - Griffin Bros. everyday price on those tires was $199.95 (while they last).

 

[JohnVee]

Where were those 33's when I was looking? Oh well, Griffin Bros. was running a buy three get one free special so I paid less for 4 new tires than he is asking for his used ones. FYI - Griffin Bros. everyday price on those tires was $199.95 (while they last).

You might think about getting a matching spare while you can.

EDIT: Somebody please let me know when Griffin does the B3G1 again.

 

[FJinTegaCay]

You might think about getting a matching spare while you can.

EDIT: Somebody please let me know when Griffin does the B3G1 again.

I bought a matching spare.

Email Russ Carter at Griffin Brothers. Tell him you are an ONSC member and that I referred you. His email is Russ@griffinbrothers.com. I'm sure he'll be happy to let you know when they'll be running their next special.

 

[Rice]

Could be time for Moonshine to step up from one tons:

http://greensboro.craigslist.org/cto/4876251946.html

 

[elkaholic]

Could be time for Moonshine to step up from one tons:

http://greensboro.craigslist.org/cto/4876251946.html

View attachment 1040929

And from that wimpy 4BT to a real Cummins

 

[JohnVee]

I finally have time and money. The quest for an 80 rear swing out bumper has begun. I thought I'd see if anybody has one for sale before I purchase new. Whatcha got?

 

[Rice]

Hmmm. Store @ Uwharrie. $116k and you can live upstairs.

http://greensboro.craigslist.org/bfs/4920082268.html

 

[lowtops]

@Rice
I can see it now, The right side with the awning would be the living quarters. The Boondocks Grill side would make a nice 3-4 car garage.

 

[Rice]

Wish to buy:

Unrelated to cruisers but I would like to find a 600 cfm square bore MARINE carburetor.

I don't have intake manifold yet so a spread bore could also work but engine is a 4.3 liter so need to keep cfm's 600 or below.

 

[lumbee1]

I finally have time and money. The quest for an 80 rear swing out bumper has begun. I thought I'd see if anybody has one for sale before I purchase new. Whatcha got?

John Vee, I don't have a rear bumper but let me know before you buy anything. I am either going to build a spare tire carrier off the frame rail with the original bumper or go with a 4x4 labs with a single swingout.

 

[CharlestonG8R]

@lumbee1 I had a spare tire carrier built for mine that hooks right up to the 4 holes in the stock bumper. I'm not going to use it though; @Mtbcoach is building me an interior carrier. Let me know if you're interested - I haven't used it yet. It was built by this guy: http://www.detoursusa.com/knucklebone.php

 

[krzyabncanuck]

Hmmm. Store @ Uwharrie. $116k and you can live upstairs.

http://greensboro.craigslist.org/bfs/4920082268.html

View attachment 1041505

I see they are not saying anything about how much it will take to clean up the ground around the tanks. I was told about 1 mill, about 2 years ago to clean up the property. I looked into it years ago.

 

[Rice]

I see they are not saying anything about how much it will take to clean up the ground around the tanks. I was told about 1 mill, about 2 years ago to clean up the property. I looked into it years ago.

OUCH. That would be an important disclosure to include in the ad.

 

[CharlestonG8R]

They're advertising as building/property only, though... I assume that's because the tanks and pumps are not part of the deal. Maybe Exxon is required to do the cleanup?

 

[krzyabncanuck]

All I know is I was going to buy it from the original owners and I talked to everyone up there and talked to the EPA and they all told me this. It leaked for decades.

 

[NCFJ]

I finally have time and money. The quest for an 80 rear swing out bumper has begun. I thought I'd see if anybody has one for sale before I purchase new. Whatcha got?

John Vee, I don't have a rear bumper but let me know before you buy anything. I am either going to build a spare tire carrier off the frame rail with the original bumper or go with a 4x4 labs with a single swingout.

A 4x4 lbs bumper with single swing out is also on my list. I've not even looked at the price for a kit.