Official ONSC member buying/selling thread (5 Viewers)

[stuxtruth]

Trying to free up some space in the garage so I figured I would post some of my spare cruiser parts. All prices are based on what I could find comparable on internet/eBay. Thanks!

* 1973-1978 Land Cruiser OEM EVAP system cover (fuel lines) **Condition: Slight rust and deformation at bottom corner (see pictured) ***Price: $35 Free pickup or +$18 shipping

* Land Cruiser gear shifting instructions 4 speed aluminum placard + screws and nylock nuts (not sure if OEM or reman) **Condition: New ***Price: $15 Free pickup or +$5 shipping

* 2F starter **Condition: Used - unknown condition ***Price: $25 Free pickup or +$18 shipping

* FJ40 Choke Pull Throttle Cable Assembly **Condition: Fair (used) OEM ***Price $70 Free pickup or +$5 shipping

* 2F Gates Water Pump 43210 **Condition: New ***Price: $30 Free pickup or +$18 shipping

* 2F OEM Intake Manifold 75-78 FJ40 **Condition: Good ***Price: $40 Free pickup or +$25 shipping

* Vintage Stewart Warner Speedo Gauge 3-3/8" **Condition: Used ***Price: $15 Free pickup or +$10 shipping

* Vintage Stewart Warner Oil Press Gauge 2-1/16" **Condition: Used ***Price: $15 Free pickup or +$10 shipping

* Vintage Stewart Warner Fuel Level Gauge 2-1/16" **Condition: Used ***Price: $15 Free pickup or +$10 shipping

* OEM Toyota FJ40 (From 1974) Corner Turn Signal Lamps **Condition: Used ***Price: $25 Free pickup or +$15 shipping

* Aluminum CVF Racing Style Gauge Pod (Rough shape. Looks like an earlier version of their refined product seen here: FJ40 Dash Panel for Aftermarket Gauges) **Condition: Poor ***Price: $15 Free pickup or +$15 shipping

* 2F Fan Clutch **Condition: Used ***Price: $40 Free pickup or +$15 shipping

* Tuffy Center Console **Condition: Used - Fair (some overspray) ***Price $150 Pickup only

* FJ40 Lower Left Dash Pad ** Condition: Poor ***Price: $30 Free pickup or +$15 shipping

* FJ40 Gauge Cluser (From 1974) **Condition: Unknown (Do not know which gauges work or not) ***Price: $100 Free Pickup or +$18 shipping

* FJ40 Dash + Dash Pad **Condition: Good-Fair ***Price: $150 Pickup only

* FJ40 Fuel Tank Cover **Condition: Fair-Poor (Mostly surface rust but will require metal work on lower edges) ***Price: $100 Pickup only

* FJ40 Rear Tire Carrier **Condition: Good-Fair (Unknown year) ***Price: $175 Pickup only

* FJ40 Custom Rear Tire Carrier **Condition: New (custom but needs to be finished meaning latch and mounting solution still need to be completed. ***Price: $175 pickup only

* FJ40 Tire Carrier Latch **Condition: Good ***Price: $35 Free Pickup or +$7 shipping

****Anything pictured without description make offer.

All parts are located in Charlotte, NC. I am willing to take more pictures and provide more detail upon request.

 

[ROBsSON]

Looking for some rear seat tabs for an fj60 they are what hold the top section of the seat in place. Might just try to make something work but if someone had a set I’d rather go that way.

 

[40LandCruising]

I have 4 FJ60 Wagon wheels, originally white, have been been painted black. I have an additional 5th chrome one but need to hold onto it as a spare unless someone wants to trade. Tires are 31x10.5x15, from 2007, and I wouldn't recommend driving on them but they do hold air very well, haven't leaked out in months, so they would serve as rollers to the T.

Currently on my ‘82 pickup

ONSC price $250 obo

 

[sleepycruiser]

4x 17” 5 lug wheels takeoffs from LC for Case of beer.

 

[grommet]

Hi y’all - just sold my 2003 LC but have a few filters laying around. Anyone want two oil filters and a fuel filter for free? I’m in N. Raleigh...swing by anytime.

 

[QsLC75]

Hi y’all - just sold my 2003 LC but have a few filters laying around. Anyone want two oil filters and a fuel filter for free? I’m in N. Raleigh...swing by anytime.

Can I swing by on my way to Logan’s run? What type of beer for the filters ?

 

[uzj100]

Guys. We are moving to a place with no yard maintenance. I have tons of tools that need a new home. They need to be picked up this week or next in Raleigh. We will also have a push mower, edger, blower and wheel barrow that need a new home as well. Also, gas cans and random basement stuff.

This would be great some one buying a house or just moved into a house.

The mower, edger, extension ladder, and blower will have a small price.

If you want me to hold something, please send over a small venmo donation. ;<) Venmo is @andrew-Roane-1

Also, I have a slightly used Barbour jacket. Size large - Price $150.

Everything located in Raleigh near Crabtree.

Hit me with a PM for more details.

I will be at my house from 12 to 5 Saturday, September 14th. Hit me on PM for the address.

 

[Beams37]

60 Series Trail Tailor Sliders

Brand new. Put on my truck last week and they just don’t fit the look I’m going for. They are brand new and have a black powder coating. I can add pics later, but feel free to go to their website.

I’d like to get $800, but I’m flexible on the price. Thanks for looking.

Edited to Add Pics ...

 

[rw74228]

Looking for one or 2 of the early door stoppers for a 1972 FJ40. Figured I would try locally before spending $100+ on the SOR set.

 

[grommet]

Can I swing by on my way to Logan’s run? What type of beer for the filters ?

No beer or payment is required...just trying to give back in whatever little ways I can. Not sure when Logan's run is but you're welcome to come by anytime.

 

[NC LX]

Guys. We are moving to a place with no yard maintenance. I have tons of tools that need a new home. They need to be picked up this week or next in Raleigh. We will also have a push mower, edger, blower and wheel barrow that need a new home as well. Also, gas cans and random basement stuff.

This would be great some one buying a house or just moved into a house.

The mower, edger, extension ladder, and blower will be like $30 each. Most of the other tools will be free.

Everything located in Raleigh near Crabtree.

Hit me with a PM for more details.

I just bought a house and coming up the weekend of Logan’s Run Hmm....

 

[Cirbo]

Looking for one or 2 of the early door stoppers for a 1972 FJ40. Figured I would try locally before spending $100+ on the SOR set.

Can you post a picture of what you are searching for, or send me an email?

 

[SeanLX]

If anyone wants these before I go the Craigslist route I can bring them to Logan's Run.

I just got new tires so my 315/75/16 Duratracs are up for grabs. I’m thinking $300 for all 4.
They performed well for the many (6ish) years I’ve had them but they did get loud. 1 is slightly more worn on what was the outside. They have some rough edges on the lugs. I tried to catch that in the pictures.
Still got some tread left so I hope somebody will use them.

View attachment 2062814

View attachment 2062815

View attachment 2062816

View attachment 2062817

 

[2fpower]

Outdoor Coolers, Insulated Drinkware & Custom Gear | RTIC

Get top-quality coolers and insulated drinkware at RTIC. Overbuilt, affordable, free shipping over $35 and hassle-free returns. Custom options available.

www.rticcoolers.com

 

[uzj100]

More pics of stuff.

 

[GLTHFJ60]

How much for the fuel can and ladder?

 

[uzj100]

How much for the fuel can and ladder?

$40 for both. Fuel can has a small dent in one side. That was the wrong venmo address. Please cancel and send to Andrew-Roane-1
If not possible and the funds are gone, the ladder and gas can are yours. Sorry for the confusion.

 

[GLTHFJ60]

$40 for both. Fuel can has a small dent in one side. roane 3 at g mail dot com for venmo and I will put them aside for you.

Sent.

 

[uzj100]

Sent.

Thanks and sorry for the confusion. Items are in raleigh or I can transport to durham on 9/23. Out of town all next week.

 

[roadstr6]

Anybody got a set of long (early) FJ40 jump seats they want to be shed of? If so, I'm your huckleberry. Condition is not a big concern. I'm just thinking about chopping one seat up and cobbling it into the back of the 55. PM me and let's talk.