Land Cruiser 80 Series 3D Scans

[PeterTheBeater]

Hi All, i have the same scanner and also have some tools to clean said scans. However I only have access to a 92 HDJ81. What would you like scanned?

~Cody

How difficult would it be to scan a gutter rail?

 

[xetura]

Hi All, i have the same scanner and also have some tools to clean said scans. However I only have access to a 92 HDJ81. What would you like scanned?

~Cody

The rear quarter panel area behind the trim panel on the right side.

 

[BakerFJ]

Hi All, i have the same scanner and also have some tools to clean said scans. However I only have access to a 92 HDJ81. What would you like scanned?

~Cody

Definitely gutter rails -- If possible the full roof width.
Inner quarter panels (without trim pieces)
Headlight housing
And quarter window, if it hasn't been done yet!

If you get around to them, a big thanks in advance. One of these days I'll cough up the cheddar for my own 3D scanner

 

[PeterTheBeater]

Definitely gutter rails -- If possible the full roof width.
Inner quarter panels (without trim pieces)
Headlight housing
And quarter window, if it hasn't been done yet!

If you get around to them, a big thanks in advance. One of these days I'll cough up the cheddar for my own 3D scanner

 

[ubguessin]

Hi All, i have the same scanner and also have some tools to clean said scans. However I only have access to a 92 HDJ81. What would you like scanned?

~Cody

Would you be able to scan the 80 series grille?

 

[glinskonian]

I've been looking for a cheap (ish) replacement for these interior carpet clips. Mine are busted... Wits' End has replacements but they're ~17 bucks a piece and I figured it'd be easier (and cheaper) to 3D print myself. View attachment 3414612

Here you go: (80 Series) Toyota Land Cruiser Rear Step Plate Clip by godfatherofpancakes | Download free STL model | Printables.com - https://www.printables.com/model/1049292-80-series-toyota-land-cruiser-rear-step-plate-clip

 

[Iggmon]

Happy to share a scan of the driver side quarter window as a .SLDPRT if it helps anyone!
The quality isn't very impressive but it was good enough for me to model gullwings with.

 

[Csr78]

The usable space on the inside rear hatch glass exported as a drawing!