Builds A 60 Runs through it… (4 Viewers)

[GLTHFJ60]

If they say it's sized right, go for it. I don't know personally.

 

[Hojack]

Ordered the BMT-090 master cylinder from Cruiser Outfitters. Thanks @cruiseroutfit

 

[Hojack]

Ordered the Wilwood proportioning valve from Summit Racing.

 

[Hojack]

@boots and I have both Friday and Saturday scheduled for work on the 60... getting really exciting.

 

[Hojack]

What shocks are you 4BTers running?

 

[Hojack]

A shot of Snowball before I left for the job.

Working up at Mt. Hood Ski Bowl.

 

[Hojack]

The 208V 3 phase motor had a bad thrust bearing causing the motor to drag the pump impellers and overload the pump variable speed controller. Replaced the motor, the 60gpm Grundfos Pump was still good to go.
More funding for Project Snowball from the Ski resorts.

 

[Hojack]

A huge difference in the 17MM stock Toyota pin vs the Marlon Crawler 25MM chromoly pin.

 

[Hojack]

The crossmember is going to get redesigned. @GLTHFJ60 what bushings are you running on the crossmember for the 4BT? This appears to be the source of vibration in my 60 as the Advanced Adapter is actually making contact on the crossmember. One of you guys had a nicely designed one from your thread.

 

[Hojack]

Found it. Thanks Johnny

 

[Hojack]

Is this a rubber insulator

 

[GLTHFJ60]

The first pic there is my transfer case crossmember, but the transmission crossmember is nearly identical in construction.

It's a poly transmission mount from energy suspension.

 

[Hojack]

@GLTHFJ60 is this the one you got.

 

[GLTHFJ60]

There are a million variations of the mount that will work, but this is the one I have been using for a while:

https://smile.amazon.com/gp/product/B000CN956K/

 

[Hojack]

Appears that style has an open space in the mount body itself. Does that give it better vibration characteristics?

 

[GLTHFJ60]

Idk what you're talking about. This is a solid mount, with steel center to prevent it from falling apart when the poly fails.

 

[Hojack]

Idk what you're talking about. This is a solid mount, with steel center to prevent it from falling apart when the poly fails.

Center looks open to me.

 

[GLTHFJ60]

Still don't know what you're talking about. There are three bolt holes there, but the center of the mount is not "open"

 

[boots4]

Are you thinking the white streak is a hole? It's a shoulder and the light is reflecting off of it but there's actually no hole in the material.

 

[Hojack]

Sorry my eyes must be playing tricks on me