- Thread starter
- #341
Flights to Mexico are too expensive right now so I opted for an easier solution using scissors, vinyl adhesive. waiting for the rain to stop then address the floors with some ospho, xylene and por15. 
99 miles to the new sty!
- Thread starter Tomba
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
PabloCruise
SILVER Star
More rain for y'all???Flights to Mexico are too expensive right now so I opted for an easier solution using scissors, vinyl adhesive. waiting for the rain to stop then address the floors with some ospho, xylene and por15.
View attachment 3589366View attachment 3589365
Looks good!
- Thread starter
- #343
Thanks @PabloCruise , Not a lot of rain this last storm but yeah, were not out of it yet. looks like midweek more
. Tough to get any paint related projects going with the temp in the 50's low 60s but looks like it will be doable in between storms. Looking forward to spring
- Thread starter
- #344
Looks like the rain ended for a while. 
. Floor prep, wire wheel, ospho and tomorrow xylene then ------> epoxy primer and paint
. Floor prep, wire wheel, ospho and tomorrow xylene then ------> epoxy primer and paint
- Thread starter
- #345
when you have to go....
PabloCruise
SILVER Star
In the handicap spot too!!!
PabloCruise
SILVER Star
How is the floor coming?Looks like the rain ended for a while.
View attachment 3595270
- Thread starter
- #348
I'm waiting for a few color samples from Monstaliner. As soon as I can confirm the color I'll order up a gallon and wait for a warm day..
I'll post up addl pics. Ive been back and forth on what to use. I found out none of the 2 part epoxy paints are cheap
. itching to get this thing back together and out for a cruise
- Thread starter
- #349
Finally ordered some 2 part epoxy primer and Montaliner !
- Thread starter
- #350
waiting for the Monstaliner to be delivered (tomorrow) I decided to take a peek at the rear heater and fan.
I discovered :
1. The fan works !
2. the core doesn't leak!
Q; What type of oil or grease should I put on the fan spindle?
Thanks!
I discovered :
1. The fan works !
2. the core doesn't leak!
Q; What type of oil or grease should I put on the fan spindle?
Thanks!
- Thread starter
- #351
Ideas on how to remove the rear heater fan switch on the dash?
- Thread starter
- #353
thx, reached for the 2&1 oil...
- Thread starter
- #354
Wrestled this out today.
- Thread starter
- #355
Got the cab floor (only the Front portion) prepped and 2 coats of epoxy primer done! Next is the Monstaliner w tint. .
Happy mothers day !
.Happy mothers day !
- Thread starter
- #356
Got 2 coats of "Man on the moon" color Monstaliner on today!
VOC goes to 11.
VOC goes to 11.
Last edited:
Looks great , Nice jobMan on the Moon ,
Pigeaten
GOLD Star
I can smell the fumes, ahhhhGot 2 coats of "Man on the moon" color Monstaliner on today!
VOC goes to 11.
View attachment 3638238View attachment 3638239
- Thread starter
- #360
Never disappoints visiting the pig farm!!! Don once again not only had a few bacon bits I was looking for but also provided a few other goodies too!
Dale and his bro also made a showing as well!!!
Dale and his bro also made a showing as well!!!
Last edited:
