72 FJ55 rebuild begins.....I'm going to have questions

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

On something that is going to be a stock restore like you are doing I would just disassemble the spring packs sand the tops and bottom smooth, paint and reassemble.
 
How the hell do I disassemble them though do I have to cut those pins and clamps holding the leafs together? I've honestly never tried to take apart a leaf spring before.
 
You can work up the ends of the bent over straps then slip a chunk of box tubing over to give you the leverage to bend them up out of your way, you only need to bend them up enough to disassemble the pack.
Big hammer to bend them back around on final assembly.
If you have a gas welding tip and are confident you can heat those straps without transferring too much heat to the springs then a little heat wouldn't hurt.
 
To remove the center pin"bolt" it's best to use a c-clamp or bench vise to hold the spring pack together while you remove that bolt, no worries if you have to cut it to get it out they are readily available.
 
Another option if you don't have a specific reason to take them apart just wire brush them good and give them a new coat of paint. They are going to get rust stains again between the leaves soon after you start driving it again.
 
Why are we only seeing this now?
Kind of still being a DICK, he did give the pictures we asked for in a timely manner and didn't call Bob M names.

@mk1spyder is OK in my book, I’m still hoping he has a Lola T70 and will share those pictures too if we play our cards right.
 
My main rig, and I really want to keep the kmart oil filter on the 1.5F lol

image000000 (1).webp


IMG_20200530_192025.webp


IMG_20200530_203531.webp
 
Days right. We don't don neakers here!!! Crocs,sandals or flip flops! Dems da rules 🙄! Oh and plenty o 😉 pictures undastoood🐷🤨🧐😒

Yep, get you some man-dels for wearing in the garage. That way the gentleman from NH @bobm will know you are of questionable lineage.

Tell us more about the engine we see back behind the Pig frame:

1596990293919.webp
 
Hey do y'all remember if the factory winch needs frame extensions on a FJ55? Anyone have pics of one mounted?

IMG_20200809_132529.webp


IMG_20200809_132515.webp
 

Users who are viewing this thread

Back
Top Bottom