1FZ-FE engine refresh parts list (OEM) (2 Viewers)

[COYS]

UPDATE 8/14/24: OEM Google Sheets parts list here

Hey folks, sorry for yet another engine refresh thread, but I haven't run into a parts list with part numbers and links to source the parts so here we go.

Anything I'm glaringly missing to get some TLC while the *engine is out*? I've already done a bunch of stuff to my '97 like fuel filter, PHH and the like. I may be missing part #s for the pan arch seal and whatever other bits and bobs that come from DIY tribal knowledge. I will be farming the work out myself.

Again, "while the engine's out*, anything obvious I'm missing? Danke.

Cylinder head	1	11101-69107 (thx goes to Onur for this one)
Block assembly	1	11400-66041
Injectors	6	23209-74080
Steering gear assembly	1	44110-60212
Arm pitman	1	45411-60360
Front mount	2	12361-17011
Rear mount	1	12371-66030
Rear main seal	1	90311-99009
HG kit	1	80 Series 1FZ Complete Head Gasket Kit 80 Series 1FZ Complete Head Gasket Kit (HGK-1FZ) absolute-wits-end.com
Hose kit	1	1FZ-FE Engine Little Hose Kit 1FZ-FE Engine Little Hose Kit (SHK-1) absolute-wits-end.com
Wire harness	1	82121-60343

80 Series 1FZ Valve Cover Leak Kit

80 Series 1FZ Valve Cover Leak Kit (VCK-1)

absolute-wits-end.com

80 Series 1FZ Complete Tuneup Kit- Naturally Aspirated Engines

80 Series 1FZ Complete Tuneup Kit- NA Engines (TUN-1KIT)

absolute-wits-end.com

OEM Vacuum Hose Kit- 3.5mm

OEM Vacuum Hose Kit- 3.5mm (VHK-1)

absolute-wits-end.com

1FZ Oil Pressure Sender Unit

1FZ Oil Pressure Sender Unit (OPS-1)

absolute-wits-end.com

80 Series 1FZ PCV Valve Kit

80 Series 1FZ PCV Valve Kit (PCV-1KIT)

absolute-wits-end.com

80 Series 1FZ Rear Heater Delete Hose

80 Series 1FZ Rear Heater Delete Hose (RHD-1)

absolute-wits-end.com

80 Series 1FZ Oil Pump Leak Kit

80 Series 1FZ Oil Pump Leak Kit (OLK-1)

absolute-wits-end.com

 

[ajax1]

My engine gasket kit from Toyota came with the valve cover kit you list, and was about 125 dollars cheaper ordering it through my local dealer. I do get a discount though from them. I’d have to go look up the part number if ya want it

 

[ajax1]

Looking at the kit by wits end it includes the valve cover stuff also so that’s not need on your refresh. He does include the oil cooler stuff which Toyota doesn’t would have to be order separately, plus manifold studs and nuts, I was able to reuse mine no prob

 

[ajax1]

Order yourself some fipg black from Toyota also and reseal the pans and pan arch. If you wanna take it further order a Asian timing cover and new water pump. You can get the cover for around 200 off amazon along with the pump for round 65

 

[COYS]

I added the head bolts and washers below - thx to the homey @NorCalFJ100 .

80 series part	Qty	Part #
Cylinder head	1​	11101-69107
Block assembly	1​	11400-66041
Head bolts	14​	90910-02111
Head washers	14​	90201-12222
Injectors	6​	23209-74080
Steering gear assembly	1​	44110-60212
Arm pitman	1​	45411-60360
Front mount	2​	12361-17011
Rear mount	1​	12371-66030
Rear main seal	1​	90311-99009
Wire harness	1​	82121-60343
HG kit	1​	80 Series 1FZ Complete Head Gasket Kit
Hose kit	1​	1FZ-FE Engine Little Hose Kit
Valve cover leak kit	1​	80 Series 1FZ Valve Cover Leak Kit
Tune-up kit	1​	80 Series 1FZ Complete Tuneup Kit- Naturally Aspirated Engines
Vacuum hose kit	1​	OEM Vacuum Hose Kit- 3.5mm
Oil pressure sender unit	1​	1FZ Oil Pressure Sender Unit
PCV valve kit	1​	80 Series 1FZ PCV Valve Kit
Rear heater delete hose	1​	80 Series 1FZ Rear Heater Delete Hose
Oil pump leak it	1​	80 Series 1FZ Oil Pump Leak Kit

 

[COYS]

Order yourself some fipg black from Toyota also and reseal the pans and pan arch. If you wanna take it further order a Asian timing cover and new water pump. You can get the cover for around 200 off amazon along with the pump for round 65

Water pump I did a while back when I was baselining. Thx.

Does anyone have the timing cover part number handy?

 

[COYS]

My engine gasket kit from Toyota came with the valve cover kit you list, and was about 125 dollars cheaper ordering it through my local dealer. I do get a discount though from them. I’d have to go look up the part number if ya want it

Part # would be cool to have in case there are others who run by this thread that want it. Thx, dude.

 

[COYS]

Does one need this oil pump bushing if you're buying a new factory block? I don't want to reuse the one from the og engine.

1FZ-FE Brass Oil Pump Bushing

LANDTANK 1FZ-FE Brass Oil Pump Bushing (OPB-1)

absolute-wits-end.com

 

[midfat]

Does one need this oil pump bushing if you're buying a new factory block? I don't want to reuse the one from the og engine.

1FZ-FE Brass Oil Pump Bushing

LANDTANK 1FZ-FE Brass Oil Pump Bushing (OPB-1)

absolute-wits-end.com

As I recall, the new factory black comes with a fresh bushing. Only need a new one if you're rebuilding the old block.

 

[coax]

Just a few thoughts as I'm currently in the process of doing a rebuild of my engine; I plan on doing a "newbie engine rebuild thread" but here's a few things I've learned thus far:

-You can go as deep as you want. Some things that may make sense while you're in there: Engine mount bushings, brake booster, firewall steering seal, new lower steering joint, flushing out your evaporator, FW coolant valve, all your EGR system stuff, new O2 sensors and exhaust gaskets, any of the fasteners that you think are rusty and need replacing, hit every seal in the engine, all the hoses that are hard to reach(vacuum, coolant, fuel).
-As I understand it the part you have listed for the head is pretty much just the casting (and maybe a few seals?)....I was originally going to purchase new but then realized it does not come with any valves/springs/shims or, more importantly, the camshafts which are crazy expensive. So...unless all the head innards are good but the block is warped....may not be worth it.
-You can also do other inspections/work such as inspecting the crossmember support at the steering box for cracking & weld/repair as necessary. Replacing some of your front suspension bushings is also much easier when you can stand in the engine bay like the sway bar bushings, etc.
-weld in a oil return on the oil pan when its out if you think a turbo may be in your future.

 

[COYS]

Just a few thoughts as I'm currently in the process of doing a rebuild of my engine; I plan on doing a "newbie engine rebuild thread" but here's a few things I've learned thus far:

-You can go as deep as you want. Some things that may make sense while you're in there: Engine mount bushings, brake booster, firewall steering seal, new lower steering joint, flushing out your evaporator, FW coolant valve, all your EGR system stuff, new O2 sensors and exhaust gaskets, any of the fasteners that you think are rusty and need replacing, hit every seal in the engine, all the hoses that are hard to reach(vacuum, coolant, fuel).
-As I understand it the part you have listed for the head is pretty much just the casting (and maybe a few seals?)....I was originally going to purchase new but then realized it does not come with any valves/springs/shims or, more importantly, the camshafts which are crazy expensive. So...unless all the head innards are good but the block is warped....may not be worth it.
-You can also do other inspections/work such as inspecting the crossmember support at the steering box for cracking & weld/repair as necessary. Replacing some of your front suspension bushings is also much easier when you can stand in the engine bay like the sway bar bushings, etc.
-weld in a oil return on the oil pan when its out if you think a turbo may be in your future.

Good point on the new head. This pic is Onur’s from the discontinued parts thread.

Midfat also brought up a salient point on who does the work. I’m still debating whether I go with a local engine builder or ship my entire truck to Valley Hybrid in NorCal. I wish I had the wherewithal to do it myself, but it’s just not in the cards for me at this point in my life.

 

[Shipwreck]

Your new short block will not come with the dowel pins to locate the head. Part #90253-15007. There are several other alignment pins for the timing cover, tranny and oil pan. Also a pin for an oil port if I recall. Sorry, I don't have numbers handy for all. You may be able to carefully remove them from your original block.
The new block also comes with a smaller coolant drain port. It is designed to use a newer style drain plug.

 

[COYS]

I've updated the list.

I'm sure I'm missing a bunch of gaskets/washers and other bits/bobs like the dowel pins mentioned above (would love additional OEM part #s for "while in there" items for improved coverage).

• I've read that more fastidious owners have observed hairline cracks in the cylinder head so measuring twice and cutting once where I can control it (same goes for their og short block)
• I'm not sure whether getting a new head without all new innards will lead to other complications because mixing new with used
• I'm still not clear on whether the engine kit (04111-66036) is necessary on its own
• Let me clarify again that I've already addressed the water pump, radiator, power steering pump/hose, fuel filter, disti, MAF, coolant hoses, brake booster, PHH, other rubbers, VCV etc so these will be missing below (easily found via search on their own)
• I still haven't been able to locate the NLA rear body mounts to which you can source from an HDJ81 per resident LC scholar Onur (update: found 'em)

Part name	Qty	Part #
Cylinder head $$$$	1	11101-69107
Block assembly $$$$	1	11400-66041
Head bolts	14	90910-02111
Head bolt washers	14	90201-12222
Fuel injector $$$	6	23209-74080
Steering gear assembly $$$$	1	44110-60212
Arm pitman	1	45411-60360
Steering bolts	4	90105-12110
Steering nuts	4	90179-12085
Front engine mount	2	12361-17011
Rear engine mount	1	12371-66030
Rear main seal	1	90311-99009
Engine wire harness $$$	1	82121-60343
Valve grind kit	1	04112-66036
Oil cooler cover gasket	1	15725-66010
Oil cooler gasket	3	15785-66010
Bolt stud	4	90080-12007
Nut lock	4	90080-17187
NUT, LOCK- FOR MANIFOLD TO HEAD	13	90179-10128
BOLT, STUD- FOR MANIFOLD TO HEAD	13	90116-10169
Valve cover gasket	1	11213-66021
OEM throttle body gasket	1	22271-66010
OEM spark plug tube seals	6	11193-15010
Engine kit	1	04111-66036
Oil pressure sender unit	1	83520-60040
body mount (under front seat feet)	2	52203-60042
body mount (under front seat feet)	2	52204-60042
body mount (under rear seat feet)	4	52205-60010
body mount (under rear seat)	4	52206-60010
body mount (outboard of rear springs)	2	52209-60050
body mount (rear of frame R NLA, from HDJ81)	1	52241-60020
body mount (rear of frame L NLA, from HDJ81)	1	52242-60010

I’m missing all the parts in the head like valves, stems, cam shafts + other necessary bits… again, part numbers and a healthy description as to why would be greatly appreciated!

 

[COYS]

• Updated with dowels/pins/plugs to add to new short block (thx to this thread)
• I'm still missing an expertly curated list of all the OEM parts (NLA, OK to reuse, etc) to add to the new head to essentially build a new OEM long block (cam shafts, timing chain, valves, tensioners, etc)
• Valve grind kit (04112-66036) is included in the engine kit (04111-66036) including additional parts as shown below (thx to Onur for the diagram)
  • Per this thread, engine kit (04111-66061) is the same as the engine kit (04111-66036), but near half the price (thx to SNLC)

Part name	Qty	Part #
Cylinder head	1	11101-69107
Block assembly	1	11400-66041
Head bolts	14	90910-02111
Head bolt washers	14	90201-12222
Fuel injector	6	23209-74080
Steering gear assembly	1	44110-60212
Arm pitman	1	45411-60360
Steering bolts	4	90105-12110
Steering nuts	4	90179-12085
Front engine mount	2	12361-17011
Rear engine mount	1	12371-66030
Rear main seal	1	90311-99009
Wire harness	1	82121-60343
Valve grind kit	1	04112-66036 (all parts in 04111-66036)
Oil cooler cover gasket	1	15725-66010 (all parts in 04111-66036)
Oil cooler gasket	3	15785-66010 (all parts in 04111-66036)
Bolt stud	4	90080-12007
Nut lock	4	90080-17187
NUT, LOCK- FOR MANIFOLD TO HEAD	13	90179-10128
BOLT, STUD- FOR MANIFOLD TO HEAD	13	90116-10169
Valve cover gasket	1	11213-66021
OEM throttle body gasket	1	22271-66010
OEM spark plug tube seals	6	11193-15010
Engine kit	1	04111-66036
Oil pressure sender unit	1	83520-60040
11434H Front near timing cover	2	90253-11021
11434X bottom right	2	90253-13002
11415A DS Middle block	1	96431-23814
11434C Rear top	2	90253-15007
11434D Rear by trans	1	90250-06068
11434B Rear by trans	2	90250-08054
Orifice cylinder	1	11448-66010
Cock assy, drain	1	90910-09129
body mount (under front seat feet)	2	52203-60042
body mount (under front seat feet)	2	52204-60042
body mount (under rear seat feet)	4	52205-60010
body mount (under rear seat)	4	52206-60010
body mount (outboard of rear springs)	2	52209-60050
body mount (rear of frame R HDJ81)	1	5224160020
body mount (rear of frame L HDJ81)	1	5224260010
Transfer case acutator	1	36410-60050

 

[COYS]

• Added sensors that attach to the head and short block since I'm replacing both with new (thx to this thread)
• Added head innards
• Now that I've placed my parts order, I'm pretty much nearing my limit of how far I want to take the pre-planned parts hoarding so feel free to slice/dice what I have as you see fit
• In summary, the list consists of new short block, new head + innards, a good number of stuff to refresh it while it's out, new mounts on chassis while engine is at the machine shop, address infamous rear main seal, freshen up all the body mounts, replace the only remaining og locking actuator on my rig, replace og engine harness and some other stuff I'm sure I'll have to address when the pros have it in their hands.
  • EGR/VSV is another tedious list of its own in another thread of mine ready to go
  • Many of the other major under hood hoses, filters, pumps, radiator, etc were swapped out ~3 years of ownership so not featured here
  • The actual engine work will be handled by a well reputed machine shop here in LA with a healthy dose of 1FZ know-how
  • For those making offers on my K294 '97 after all this is done, I won't accept a penny less than $60K as of Q4 2021

Again, big thanks to every forum member I cited and continue to lean on here on ih8.

Part name	Qty	Part #
Distributor	1	19100-66020
Cylinder head	1	11101-69107
Block assembly	1	11400-66041
Head bolts	14	90910-02111
Head bolt washers	14	90201-12222
Fuel injector	6	23209-74080
Steering gear assembly	1	44110-60212
Arm pitman	1	45411-60360
Steering bolts	4	90105-12110
Steering nuts	4	90179-12085
Front engine mount	2	12361-17011
Rear engine mount	1	12371-66030
Rear main seal	1	90311-99009
Bolt stud	4	90080-12007
Nut lock	4	90080-17187
NUT, LOCK- FOR MANIFOLD TO HEAD	13	90179-10128
BOLT, STUD- FOR MANIFOLD TO HEAD	13	90116-10169
Valve cover gasket	1	11213-66021
OEM throttle body gasket	1	22271-66010
OEM spark plug tube seals	6	11193-15010
Engine kit from 1998	1	04111-66061
Oil pressure sender unit	1	83520-60040
11434H Front near timing cover	2	90253-11021
11434X bottom right	2	90253-13002
11415A DS Middle block	1	96431-23814
11434C Rear top	2	90253-15007
11434D Rear by trans	1	90250-06068
11434B Rear by trans	2	90250-08054
Orifice cylinder	1	11448-66010
Cock assy, drain	1	90910-09129
body mount (under front seat feet)	2	52203-60042
body mount (under front seat feet)	2	52204-60042
body mount (under rear seat feet)	4	52205-60010
body mount (under rear seat)	4	52206-60010
body mount (outboard of rear springs)	2	52209-60050
body mount (rear of frame R HDJ81)	1	5224160020
body mount (rear of frame L HDJ81)	1	5224260010
Transfer case acutator	1	36410-60050
TVV	1	25820-13020
ECT sensor	1	89422-35010
ECT sensor washer	1	90430-12005
ECT cut switch	1	88790-60050
ECT sender gauge	1	83420-16040
Knock sensor wire	2	82219-35010
Knock sensor	2	89615-30050
10/5/21 Camshaft	1	13502-66010
Camshaft 2	1	13501-66020
Gasket chain tension	1	13552-66010
Camshaft gear	1	13529-62901
10/4/21 DISTRIBUTOR DRIVE GEAR	1	13515-75010
CAMSHAFT TIMING GEAR/SPROCKET	1	13523-66020
TIMING CHAIN TENSIONER	1	13540-66011
CHAIN SLIPPER	1	13559-66011
CHAIN DAMPER	1	13561-66010
TIMING CHAIN	1	13506-66010
VALVE, EXHAUST	12	13715-66030
VALVE, INTAKE	12	13711-66030
10/4/21 SPRING, COMPRESSION	24	90501-38006
VALVE SPRING RETAINER LOCK	48	90913-03027
VALVE SEATS	24	13734-66020
VALVE RETAINERS	24	13741-66020
10/4/21 OIL PUMP COVER GASKET	1	15188-66020
OIL PUMP ROTOR	1	15102-66020
OIL PUMP DRIVE GEAR	1	15163-66021
OIL PUMP RELIEF VALVE	1	15131-46040
10/4/21 RELIEF VALVE SPRING	1	15132-66020
GASKET, RELIEF VALVE	1	15134-17010
10/4/21 PLUG, RELIEF VALVE	1	15133-17010
OIL COOLER GASKETS	2	15785-66010
COVER, OIL COOLER	1	15701-66010

 

[COYS]

I lied. I bought more parts. I hope this insanity helps others!

• Added a bunch of oil cooler bits and bobs
• Same deal for the valve odds and ends
• "" timing chain/cover area
• "" crankshaft area
• Don't mind the shim because they come in a variety of sizes and will vary depending on your engine situation
• Good news for me is that the cylinder head is already at the dealership and the short block is being made right now in Japan with a 10/20 eta per my Toyota parts dude

Part name	Qty	Part #
Cylinder head	1	11101-69107
Block assembly	1	11400-66041
Head bolts	14	90910-02111
Head bolt washers	14	90201-12222
Fuel injector	6	23209-74080
Steering gear assembly	1	44110-60212
Arm pitman	1	45411-60360
Steering bolts	4	90105-12110
Steering nuts	4	90179-12085
Front engine mount	2	12361-17011
Rear engine mount	1	12371-66030
Rear main seal	1	90311-99009
Bolt stud	4	90080-12007
Nut lock	4	90080-17187
NUT, LOCK- FOR MANIFOLD TO HEAD	13	90179-10128
BOLT, STUD- FOR MANIFOLD TO HEAD	13	90116-10169
Valve cover gasket	1	11213-66021
OEM throttle body gasket	1	22271-66010
OEM spark plug tube seals	6	11193-15010
Engine kit from 1998	1	04111-66061
Oil pressure sender unit	1	83520-60040
11434H Front near timing cover	2	90253-11021
11434X bottom right	2	90253-13002
11415A DS Middle block	1	96431-23814
11434C Rear top	2	90253-15007
11434D Rear by trans	1	90250-06068
11434B Rear by trans	2	90250-08054
Orifice cylinder	1	11448-66010
Cock assy, drain	1	90910-09129
body mount (under front seat feet)	2	52203-60042
body mount (under front seat feet)	2	52204-60042
body mount (under rear seat feet)	4	52205-60010
body mount (under rear seat)	4	52206-60010
body mount (outboard of rear springs)	2	52209-60050
body mount (rear of frame R HDJ81)	1	5224160020
body mount (rear of frame L HDJ81)	1	5224260010
Transfer case acutator	1	36410-60050
TVV	1	25820-13020
ECT sensor	1	89422-35010
ECT sensor washer	1	90430-12005
ECT cut switch	1	88790-60050
ECT sender gauge	1	83420-16040
Knock sensor wire	2	82219-35010
Knock sensor	2	89615-30050
10/5/21 Camshaft	1	13502-66010
Camshaft 2	1	13501-66020
Gasket chain tension	1	13552-66010
Camshaft gear	1	13529-62901
10/4/21 DISTRIBUTOR DRIVE GEAR	1	13515-75010
CAMSHAFT TIMING GEAR/SPROCKET	1	13523-66020
TIMING CHAIN TENSIONER	1	13540-66011
CHAIN SLIPPER	1	13559-66011
CHAIN DAMPER	1	13561-66010
TIMING CHAIN	1	13506-66010
VALVE, EXHAUST	12	13715-66030
VALVE, INTAKE	12	13711-66030
10/4/21 SPRING, COMPRESSION	24	90501-38006
VALVE SPRING RETAINER LOCK	48	90913-03027
VALVE SEATS	24	13734-66020
VALVE RETAINERS	24	13741-66020
10/4/21 OIL PUMP COVER GASKET	1	15188-66020
OIL PUMP ROTOR	1	15102-66020
OIL PUMP DRIVE GEAR	1	15163-66021
OIL PUMP RELIEF VALVE	1	15131-46040
10/4/21 RELIEF VALVE SPRING	1	15132-66020
GASKET, RELIEF VALVE	1	15134-17010
10/4/21 PLUG, RELIEF VALVE	1	15133-17010
OIL COOLER GASKETS	2	15785-66010
COVER, OIL COOLER	1	15701-66010
10/5/21 Distributor	1	1910066020
valve keeper	50	90913-03027
valve seals intake	12	90913-02096
valve seals exhaust	12	90913-02105
valve lifters	24	13751-66020
shim	24	13753-66020
timing cover	1	11310-66020
timing cover gasket	1	11328-66020
Front main seal	1	90311-52022
Oil cooler relief valve gasket	2	15134-20010
Oil cooler cover gasket	1	15725-66010
Bypass tube gasket	1	90301-29006
SPRING, OIL COOLER RELIEF VALVE	1	15132-50010
VALVE, OIL COOLER RELIEF	1	15131-64020
PLUG, OIL COOLER RELIEF VALVE X 2	2	15133-20010
Oil cooler plug	1	90341-20002
Oil cooler assy	1	15710-54030
Oil cooler cover	1	15721-66010
RING, SHAFT SNAP(FOR CAMSHAFT SUB GEAR)	1	90520-41004
WASHER, WAVE(FOR CAMSHAFT SUB GEAR)	1	90206-42001
PIN, STRAIGHT	1	90250-05027
SPRING, CAMSHAFT GEAR	1	13579-50020
BOLT	1	90910-02093
PIN, STRAIGHT NO.2(FOR CAMSHAFT KNOCK)	2	90250-05030
RING, SHAFT SNAP(FOR CAMSHAFT SUB GEAR)	1	90520-47002
NUT (FOR TRANSMISSION CONTROL CABLE)	1	90179-08040
BOLT, STUD(FOR EGR INLET)	1	92122-60818
BOLT	1	90109-12057
BOLT, FLANGE	2	91511-B0816
JET, OIL	1	13516-66011
gear, pump drive shaft	1	13522-66030
gear or sprocket, crankshaft timing	1	13521-66020
Key (for crankshaft timing gear)	2	95161-30516
rotor, crankshaft position sensor	1	19315-66010
Bolt (for crankshaft pulley set)	1	90119-22001
WASHER SET, CRANKSHAFT THRUST	1	1101166020

 

[davidp14]

you've done a ton of work just compiling this list, thanks for sharing.

I hope to put this to good use some day and I know this will serve as an excellent reference for others here. I also think this will be the first time I ever say your price of $60k seems reasonable.

 

[COYS]

you've done a ton of work just compiling this list, thanks for sharing.

I hope to put this to good use some day and I know this will serve as an excellent reference for others here. I also think this will be the first time I ever say your price of $60k seems reasonable.

I look forward to reading about your rebuild journey soon! I apologize in advance that it’s not an FSM league list by any stretch, yet features just enough parts curation to reflect the reality of my 80’s first engine rebuild+.

I’ve come to find out the lifters 13751-66020 are discontinued per a USA based Toyota parts counter. I can’t find them on partsouq and don’t want to order from amayama.

I’ll keep digging.

 

[OGBeno]

Definitely not discontinued.

 

[COYS]

Definitely not discontinued.

Never boring