And I thought my build was in-depth. Incredible work man, your patience and attention to detail are awesome. Can't wait to watch it progress.
1998 TLC UZJ100 frame off resto build log (2 Viewers)
- Thread starter rampantwolf
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #142
Here is the RTT on my wife’s Lexus RX 450h that we are taking on this summers Colorado trip. It’s the size of her car but eventually it will find a permanent home on top of the Hundy.
- Thread starter
- #143
First time packing up the Smittybilt 2Gen XL RTT. It took me 37 min. That includes removing the annex too. I can do better. Here is a time lapse:
youtu.be/LSBmQucn8S8
youtu.be/LSBmQucn8S8
- Thread starter
- #144
- Thread starter
- #145
Jackery and ARB Zero 101qt update:
im sadly disappointed that the Jackery can only handle 42 watts of charging while the ARB Zero pulls 62 watts (~5A @12VDC). This means that the Jackery can only handle the ARB if at idle. I suppose that is where ARB reports their 0.8A current draw which is a bogus claim (misleading at best) when you think about it.
im sadly disappointed that the Jackery can only handle 42 watts of charging while the ARB Zero pulls 62 watts (~5A @12VDC). This means that the Jackery can only handle the ARB if at idle. I suppose that is where ARB reports their 0.8A current draw which is a bogus claim (misleading at best) when you think about it.
- Thread starter
- #146
Ok so finally got the underside of the cab etched with phosphoric acid and zinc phosphate rust inhibitor. Two layers of SprayMax 2K Epoxy primer sprayed on.
Pro tip: have the top coat ready to spray after laying down primer. The very corrugated underside took two days of overhead work to sand down in preparation for the top coat. I should have waited until the top coat arrived via Amazon truck before putting epoxy primer on. That way you don’t have to sand the primer.
Pro tip: have the top coat ready to spray after laying down primer. The very corrugated underside took two days of overhead work to sand down in preparation for the top coat. I should have waited until the top coat arrived via Amazon truck before putting epoxy primer on. That way you don’t have to sand the primer.
- Thread starter
- #147
S
Fellow Austin area Cruiser Head here (Lakeway). This is the craziest s*** I've seen on the internet since 1992 and I LOVE IT! I'm in the middle of a HUGE secret project on my rig, but it pales in comparison. Can not wait to see the finished product! Stay at it!
- Thread starter
- #149
Thx for that. I’d love to host the Austin Area Cruisers crew over for a bbq after the new year. We live in Leander near Crystal Falls and Ronald Reagan.
Count me in for that! I can invite several other Austin Cruiser Heads as well. Would love to see your project first hand.
- Thread starter
- #151
Perfect. I’ll follow up when we get back
- Thread starter
- #152
Things are moving slow like seem sealer. Just got back from vacay in Colorado and need to get this unibody underside painted. Waiting for seem sealer AND the weather to cooperate.
Join us for one or both...
When: Sunday January 16th
Where: Rudy's @ 360 - 2451 S Capital of Texas Hwy, Austin, TX 78746
Time: 12:30pm
-------------------------------------------------------------------------------------------
Hill Country Cruiser Round-up
Five Soul Wine Co./Frontyard Brewing
10:00a.m.-?
February 5, 2022
Doors open at 11:00
Large grassy parking area across the street
Kid and dog friendly
Two food trucks
Pickle Ball
Be there or be a Jeeper
https://5soulwine.com
Frontyard - https://www.frontyardbrewing.com/
4514 Bob Wire Rd, Spicewood, TX 78669
- Thread starter
- #154
Got behind after getting the COVID. Finally found a window of 70 F weather so I painted the underside using gloss black SprayMax 2k urethane
- Thread starter
- #155
Totally understand. Hope you are feeling better. The Feb 5 meet will be a good one (weather permitting).Thank you for the invite @AustinJoe but had the COVIDI’ll try to make the Feb 5 meet.
CenTXFJ60
SILVER Star
Definitely following your progress. Have a 99 with 115k my brother and I sourced a few years ago. PO was 80+ but unfortunately lived in the Philly market. Have a donor out of the south compliments of another good MUD friend. Not planning the level of detail you’ve gone through, but a frame swap never the less. Thanks you for the detailed write up. Jimmy
- Thread starter
- #158
The frame swap isn’t that big of a deal however all the hardware had to be replaced on mine. It was just too rusted. I wouldn’t trust some of those rusted bolt heads. It’s amazing how time consuming it is to order this from Toyota as you assemble everything. I also decided to replace a lot of accessories which all needs to be sourced. That perhaps wasn’t needed but since I had no experience with this car I didn’t want to get stuck overlanding with breakdowns and off-the-grid repairs.
- Thread starter
- #159
Engine mounts were delivered and the motor installed on the chassis.
- Thread starter
- #160
Then with the help of a friend we rolled it in under the unibody.
