Long shot here, but I'm looking to regear my transfer case on my 1999 LX470 (2.49:1 factory ratio).
If anyone has a set they're looking to get rid of for less than MSRP, I'm interested.
Patch
All was pretty well before. Suddenly, the reverse gear failed. Then all gears failed. So i am unable to move the car.
But it appears that after parking for some hours, it can engage the gears just for a short while.
Gear box oil is ok. I had even drained and replaced it about 3000 miles ago...
Hey Dudes,
I was lucky enough to partner with an expert in the industry to bring you guys a 4-Part series showing how to rebuild and modify the HF2AV transfer case. The expert I'm talking about is Georg Esterer @orangefj45 who owns Valley Hybrids in Stockton, California. Georg's Valley Hybrids...
As the title states,
Looking for gears for my truck. If anyone has them already set up in a 3rd member that would obviously be awesome. 4.10 to 4.88...
cheers!
Joel
I’ve done the gamiviti fix many times over the years but trying to make factory auto seat into manual without using the nuts on front of seat each time. Have an extra corbeau manual seat mount/bracket. BUT, how do you get the factory bottom rails that bolt to floor to slide out of their mating...
My speedo needle was missing. Pulled cluster, removed speedo module and found needle. Bad news all the main input gear and aux gear is stripped.Are any of the parts available?
Good evening
I have a j100 rear axle which I want to convert to a full floater.
The axle shafts of j100 are 32 splines 34mm in diameter. I need to convert the diff somehow to fit 30spline shafts. Are the spider gears of j100 and j80 /or other 30splne diffs/ same size and shape besides the...
I have a set of H41 low-range gears taken out of a NOS split-case transfer. Never been on the road; I swapped in a Sumo gear set. The H41/transfer case combo was a diesel model, I was told, and these gears might thus be a slightly lower ratio than a petrol gear set, but I cannot confirm. I need...
I’ve been working on a regear to 4.88s I noticed some pitting on my spider gears and just wanted to check with someone who is more experienced with these.
I’m only asking because I’m having a hard time finding/getting the replacements.
I attached photos of the spider gears, let me know what...
Seeing if anyone has one laying around. Going in 96' lx450. I'm over in west side of Michigan LP... Not paying stupid prices..;). Let me know...thank ya.
I recently regeared my 80 and decided to go with a set of REM super polished gears from Zuk, rather than a set of gears that I bought from Nitro (box unopened).
So I got to thinking, rather than trying to sell these why not trade?
I have been slowly collecting parts for a 4” lift. So far I...
For sale, 60 series ring and pinion. Front set shows little to no wear at all, rear has 230k miles, looks polished on the teeth, one chip on the pinion end. Both ran great with no issues, I re-geared and like the new ratio with my setup. Missing most of the carrier bolts. $300.
EDIT: Top...
Howdy,
I Just completed this fix and the forward/reverse of the passenger seat is still inoperable. I was super careful, followed the video, actually watched 3 difference vids before starting.
There is *no sound whatsoever* when the switch is engaged. Even if I installed the gears...
Just seeing what's out there. considering swapping out my stock 3.70 gears on my 1985 fj60 for some 62 gears.
If anyone wants a set of 3.70 gears, maybe we could trade also (not sure how easy that would be but...)
cheers,
Joel
Pulled the trigger on the Nitro sale and my Aussie locker won’t work with the new gears. ISO Eaton e-locker for 1997 80 series rear 3rd member with 4.88 gears